[Intel-gfx] [PATCH 13/13] drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code
Ander Conselvan de Oliveira
ander.conselvan.de.oliveira at intel.com
Tue Mar 8 15:46:27 UTC 2016
Include DPLL0 in the managed dplls for SKL/KBL. While it has to be kept
enabled because of it driving CDCLK, it is better to special case that
inside the DPLL code than in the higher level.
v2: Use INTEL_DPLL_ALWAYS_ON flag. (Ander)
v3: Remove extremely paranoid WARN_ONs. (Maarten)
Handle DPLL0 in skylake_get_ddi_pll() properly. (Ander)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 21 ------
drivers/gpu/drm/i915/intel_display.c | 12 +---
drivers/gpu/drm/i915/intel_dp.c | 52 +-------------
drivers/gpu/drm/i915/intel_dpll_mgr.c | 124 ++++++++++++++++++++++++++--------
drivers/gpu/drm/i915/intel_dpll_mgr.h | 7 +-
5 files changed, 105 insertions(+), 111 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 3cb9f36..8ef4d2e 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1008,9 +1008,6 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
{
struct intel_shared_dpll *pll;
- if (intel_encoder->type == INTEL_OUTPUT_EDP)
- return true;
-
pll = intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder);
if (pll == NULL) {
DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
@@ -1570,24 +1567,6 @@ void intel_ddi_clk_select(struct intel_encoder *encoder,
uint32_t dpll = pipe_config->ddi_pll_sel;
uint32_t val;
- /*
- * DPLL0 is used for eDP and is the only "private" DPLL (as
- * opposed to shared) on SKL
- */
- if (encoder->type == INTEL_OUTPUT_EDP) {
- WARN_ON(dpll != SKL_DPLL0);
-
- val = I915_READ(DPLL_CTRL1);
-
- val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) |
- DPLL_CTRL1_SSC(dpll) |
- DPLL_CTRL1_LINK_RATE_MASK(dpll));
- val |= pipe_config->dpll_hw_state.ctrl1 << (dpll * 6);
-
- I915_WRITE(DPLL_CTRL1, val);
- POSTING_READ(DPLL_CTRL1);
- }
-
/* DDI -> PLL mapping */
val = I915_READ(DPLL_CTRL2);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7477406..bc98c38 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9758,21 +9758,15 @@ static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
struct intel_crtc_state *pipe_config)
{
enum intel_dpll_id id;
- u32 temp, dpll_ctl1;
+ u32 temp;
temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
pipe_config->ddi_pll_sel = temp >> (port * 3 + 1);
switch (pipe_config->ddi_pll_sel) {
case SKL_DPLL0:
- /*
- * On SKL the eDP DPLL (DPLL0 as we don't use SSC) is not part
- * of the shared DPLL framework and thus needs to be read out
- * separately
- */
- dpll_ctl1 = I915_READ(DPLL_CTRL1);
- pipe_config->dpll_hw_state.ctrl1 = dpll_ctl1 & 0x3f;
- return;
+ id = DPLL_ID_SKL_DPLL0;
+ break;
case SKL_DPLL1:
id = DPLL_ID_SKL_DPLL1;
break;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c2543b9..181eb70 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1229,52 +1229,6 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
intel_connector_unregister(intel_connector);
}
-static void
-skl_edp_set_pll_config(struct intel_crtc_state *pipe_config)
-{
- u32 ctrl1;
-
- memset(&pipe_config->dpll_hw_state, 0,
- sizeof(pipe_config->dpll_hw_state));
-
- pipe_config->ddi_pll_sel = SKL_DPLL0;
- pipe_config->dpll_hw_state.cfgcr1 = 0;
- pipe_config->dpll_hw_state.cfgcr2 = 0;
-
- ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
- switch (pipe_config->port_clock / 2) {
- case 81000:
- ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
- SKL_DPLL0);
- break;
- case 135000:
- ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350,
- SKL_DPLL0);
- break;
- case 270000:
- ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700,
- SKL_DPLL0);
- break;
- case 162000:
- ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620,
- SKL_DPLL0);
- break;
- /* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
- results in CDCLK change. Need to handle the change of CDCLK by
- disabling pipes and re-enabling them */
- case 108000:
- ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
- SKL_DPLL0);
- break;
- case 216000:
- ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160,
- SKL_DPLL0);
- break;
-
- }
- pipe_config->dpll_hw_state.ctrl1 = ctrl1;
-}
-
static int
intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
{
@@ -1632,11 +1586,7 @@ found:
&pipe_config->dp_m2_n2);
}
- if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) && is_edp(intel_dp))
- skl_edp_set_pll_config(pipe_config);
- else if (IS_BROXTON(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev))
- /* handled in ddi */;
- else
+ if (!HAS_DDI(dev))
intel_dp_set_clock(encoder, pipe_config);
return true;
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
index a83af07..4b636c4 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
@@ -785,7 +785,12 @@ struct skl_dpll_regs {
};
/* this array is indexed by the *shared* pll id */
-static const struct skl_dpll_regs skl_dpll_regs[3] = {
+static const struct skl_dpll_regs skl_dpll_regs[4] = {
+ {
+ /* DPLL 0 */
+ .ctl = LCPLL1_CTL,
+ /* DPLL 0 doesn't support HDMI mode */
+ },
{
/* DPLL 1 */
.ctl = LCPLL2_CTL,
@@ -806,24 +811,27 @@ static const struct skl_dpll_regs skl_dpll_regs[3] = {
},
};
-static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll)
+static void skl_ddi_pll_write_ctrl1(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
{
uint32_t val;
- unsigned int dpll;
- const struct skl_dpll_regs *regs = skl_dpll_regs;
-
- /* DPLL0 is not part of the shared DPLLs, so pll->id is 0 for DPLL1 */
- dpll = pll->id + 1;
val = I915_READ(DPLL_CTRL1);
- val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) | DPLL_CTRL1_SSC(dpll) |
- DPLL_CTRL1_LINK_RATE_MASK(dpll));
- val |= pll->config.hw_state.ctrl1 << (dpll * 6);
+ val &= ~(DPLL_CTRL1_HDMI_MODE(pll->id) | DPLL_CTRL1_SSC(pll->id) |
+ DPLL_CTRL1_LINK_RATE_MASK(pll->id));
+ val |= pll->config.hw_state.ctrl1 << (pll->id * 6);
I915_WRITE(DPLL_CTRL1, val);
POSTING_READ(DPLL_CTRL1);
+}
+
+static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ const struct skl_dpll_regs *regs = skl_dpll_regs;
+
+ skl_ddi_pll_write_ctrl1(dev_priv, pll);
I915_WRITE(regs[pll->id].cfgcr1, pll->config.hw_state.cfgcr1);
I915_WRITE(regs[pll->id].cfgcr2, pll->config.hw_state.cfgcr2);
@@ -834,8 +842,14 @@ static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv,
I915_WRITE(regs[pll->id].ctl,
I915_READ(regs[pll->id].ctl) | LCPLL_PLL_ENABLE);
- if (wait_for(I915_READ(DPLL_STATUS) & DPLL_LOCK(dpll), 5))
- DRM_ERROR("DPLL %d not locked\n", dpll);
+ if (wait_for(I915_READ(DPLL_STATUS) & DPLL_LOCK(pll->id), 5))
+ DRM_ERROR("DPLL %d not locked\n", pll->id);
+}
+
+static void skl_ddi_dpll0_enable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ skl_ddi_pll_write_ctrl1(dev_priv, pll);
}
static void skl_ddi_pll_disable(struct drm_i915_private *dev_priv,
@@ -849,12 +863,16 @@ static void skl_ddi_pll_disable(struct drm_i915_private *dev_priv,
POSTING_READ(regs[pll->id].ctl);
}
+static void skl_ddi_dpll0_disable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+}
+
static bool skl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
struct intel_shared_dpll *pll,
struct intel_dpll_hw_state *hw_state)
{
uint32_t val;
- unsigned int dpll;
const struct skl_dpll_regs *regs = skl_dpll_regs;
bool ret;
@@ -863,18 +881,15 @@ static bool skl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
ret = false;
- /* DPLL0 is not part of the shared DPLLs, so pll->id is 0 for DPLL1 */
- dpll = pll->id + 1;
-
val = I915_READ(regs[pll->id].ctl);
if (!(val & LCPLL_PLL_ENABLE))
goto out;
val = I915_READ(DPLL_CTRL1);
- hw_state->ctrl1 = (val >> (dpll * 6)) & 0x3f;
+ hw_state->ctrl1 = (val >> (pll->id * 6)) & 0x3f;
/* avoid reading back stale values if HDMI mode is not enabled */
- if (val & DPLL_CTRL1_HDMI_MODE(dpll)) {
+ if (val & DPLL_CTRL1_HDMI_MODE(pll->id)) {
hw_state->cfgcr1 = I915_READ(regs[pll->id].cfgcr1);
hw_state->cfgcr2 = I915_READ(regs[pll->id].cfgcr2);
}
@@ -886,6 +901,35 @@ out:
return ret;
}
+static bool skl_ddi_dpll0_get_hw_state(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll,
+ struct intel_dpll_hw_state *hw_state)
+{
+ uint32_t val;
+ const struct skl_dpll_regs *regs = skl_dpll_regs;
+ bool ret;
+
+ if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS))
+ return false;
+
+ ret = false;
+
+ /* DPLL0 is always enabled since it drives CDCLK */
+ val = I915_READ(regs[pll->id].ctl);
+ if (WARN_ON(!(val & LCPLL_PLL_ENABLE)))
+ goto out;
+
+ val = I915_READ(DPLL_CTRL1);
+ hw_state->ctrl1 = (val >> (pll->id * 6)) & 0x3f;
+
+ ret = true;
+
+out:
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
+
+ return ret;
+}
+
struct skl_wrpll_context {
uint64_t min_deviation; /* current minimal deviation */
uint64_t central_freq; /* chosen central freq */
@@ -1165,7 +1209,8 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
DPLL_CFGCR2_PDIV(wrpll_params.pdiv) |
wrpll_params.central_freq;
} else if (encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
- encoder->type == INTEL_OUTPUT_DP_MST) {
+ encoder->type == INTEL_OUTPUT_DP_MST ||
+ encoder->type == INTEL_OUTPUT_EDP) {
switch (crtc_state->port_clock / 2) {
case 81000:
ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0);
@@ -1176,6 +1221,19 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
case 270000:
ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0);
break;
+ /* eDP 1.4 rates */
+ case 162000:
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, 0);
+ break;
+ /* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
+ results in CDCLK change. Need to handle the change of CDCLK by
+ disabling pipes and re-enabling them */
+ case 108000:
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, 0);
+ break;
+ case 216000:
+ ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, 0);
+ break;
}
cfgcr1 = cfgcr2 = 0;
@@ -1190,13 +1248,18 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
crtc_state->dpll_hw_state.cfgcr1 = cfgcr1;
crtc_state->dpll_hw_state.cfgcr2 = cfgcr2;
- pll = intel_find_shared_dpll(crtc, crtc_state,
- DPLL_ID_SKL_DPLL1, DPLL_ID_SKL_DPLL3);
+ if (encoder->type == INTEL_OUTPUT_EDP)
+ pll = intel_find_shared_dpll(crtc, crtc_state,
+ DPLL_ID_SKL_DPLL0,
+ DPLL_ID_SKL_DPLL0);
+ else
+ pll = intel_find_shared_dpll(crtc, crtc_state,
+ DPLL_ID_SKL_DPLL1,
+ DPLL_ID_SKL_DPLL3);
if (!pll)
return NULL;
- /* shared DPLL id 0 is DPLL 1 */
- crtc_state->ddi_pll_sel = pll->id + 1;
+ crtc_state->ddi_pll_sel = pll->id;
intel_reference_shared_dpll(pll, crtc_state);
@@ -1209,6 +1272,12 @@ static const struct intel_shared_dpll_funcs skl_ddi_pll_funcs = {
.get_hw_state = skl_ddi_pll_get_hw_state,
};
+static const struct intel_shared_dpll_funcs skl_ddi_dpll0_funcs = {
+ .enable = skl_ddi_dpll0_enable,
+ .disable = skl_ddi_dpll0_disable,
+ .get_hw_state = skl_ddi_dpll0_get_hw_state,
+};
+
static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
struct intel_shared_dpll *pll)
{
@@ -1624,9 +1693,10 @@ static const struct intel_dpll_mgr hsw_pll_mgr = {
};
static const struct dpll_info skl_plls[] = {
- { "DPPL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs, 0 },
- { "DPPL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs, 0 },
- { "DPPL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs, 0 },
+ { "DPLL 0", DPLL_ID_SKL_DPLL0, &skl_ddi_dpll0_funcs, INTEL_DPLL_ALWAYS_ON },
+ { "DPPL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs, 0 },
+ { "DPPL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs, 0 },
+ { "DPPL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs, 0 },
{ NULL, -1, NULL, },
};
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.h b/drivers/gpu/drm/i915/intel_dpll_mgr.h
index adf4706..1d34147 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.h
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.h
@@ -54,9 +54,10 @@ enum intel_dpll_id {
DPLL_ID_LCPLL_2700 = 5,
/* skl */
- DPLL_ID_SKL_DPLL1 = 0,
- DPLL_ID_SKL_DPLL2 = 1,
- DPLL_ID_SKL_DPLL3 = 2,
+ DPLL_ID_SKL_DPLL0 = 0,
+ DPLL_ID_SKL_DPLL1 = 1,
+ DPLL_ID_SKL_DPLL2 = 2,
+ DPLL_ID_SKL_DPLL3 = 3,
};
#define I915_NUM_PLLS 6
--
2.4.3
More information about the Intel-gfx
mailing list