[Intel-gfx] [PATCH i-g-t v7] lib/igt_kms: Add COMMIT_ATOMIC to igt_display_commit2()
Lionel Landwerlin
llandwerlin at gmail.com
Wed Mar 9 16:14:34 UTC 2016
Thanks,
It seems the igt_atomic_prepare_plane_commit() function still needs to
reset the plane->rotation_changed field (it was at the bottom of my
previous email, sorry for that).
The way supported property ids are listed from the driver isn't
different in the atomic and non atomic cases.
The igt_atomic_fill_props and igt_atomic_fill_plane_props functions are
not atomic specific.
What I was suggesting is to have a unified way of listing the
properties regardless of whether we're committing things atomically or
not and just have the commit function do a special case for atomic.
That way it becomes easier to add new properties.
-
Lionel
On Wed, 2016-03-09 at 19:55 +0530, Mayuresh Gharpure wrote:
> Hi Lionel,
>
> I've incorporated your comments using the diff patch submitted by
> Maarten and submitted the changes
>
> https://patchwork.freedesktop.org/series/4274/
>
> Also, please find my comments inline
>
> Regards,
> Mayuresh
>
> On 3/8/2016 9:41 PM, Lionel Landwerlin wrote:
> > Hi Maarten,
> >
> > Yeah that would be much simpler I think.
> >
> > Damien also looked at this patch over my shoulder and had
> > additional comments.
> > So more or less proxying :
> >
> > - Not sure why we're exposing the new enums and the
> > igt_atomic_popuplate_* macros in igt_kms.h.
> > After all we're not using them anywhere outside igt_kms.c.
> Macros are just to improve readability. In case some new feature
> needs to be added, we can just add an enum and use the macro to
> populate it in call to IOCTL.
> These were added in initial implementation by Marius.
>
> >
> > - We have a couple of properties ids stored in igt_kms.h
> > (background_property & rotation_property), it would make sense to
> > get rid of those and use the new created arrays instead.
> These are used by the COMMIT_LEGACY and COMMIT_UNIVERSAL style
> calls. So keeping it as is, as changing this may need a change in
> many existing tests
> >
> > Cheers,
> >
> > -
> > Lionel
> >
> > On 08/03/16 15:56, Maarten Lankhorst wrote:
> > > Op 07-03-16 om 13:50 schreef Lionel Landwerlin:
> > > > Hi Pratik,
> > > >
> > > > I'm really looking forward to get this merged.
> > > > Just a few comments on the plane commit part below.
> > > Would the following diff to the patch satisfy you? It would clean
> > > up things a lot.
> > >
> > > diff --git a/lib/igt_kms.c b/lib/igt_kms.c
> > > index 1f738e14f52f..454ff7552b4a 100644
> > > --- a/lib/igt_kms.c
> > > +++ b/lib/igt_kms.c
> > > @@ -1534,14 +1534,6 @@
> > > igt_atomic_prepare_plane_commit(igt_plane_t *plane, igt_output_t
> > > *output,
> > >
> > > igt_display_t *display = output->display;
> > > uint32_t fb_id, crtc_id;
> > > - uint32_t src_x;
> > > - uint32_t src_y;
> > > - uint32_t src_w;
> > > - uint32_t src_h;
> > > - int32_t crtc_x;
> > > - int32_t crtc_y;
> > > - uint32_t crtc_w;
> > > - uint32_t crtc_h;
> > >
> > > igt_assert(plane->drm_plane);
> > >
> > > @@ -1552,54 +1544,30 @@
> > > igt_atomic_prepare_plane_commit(igt_plane_t *plane, igt_output_t
> > > *output,
> > > fb_id = igt_plane_get_fb_id(plane);
> > > crtc_id = output->config.crtc->crtc_id;
> > >
> > > - if ((plane->fb_changed || plane->size_changed) && fb_id
> > > == 0) {
> > > -
> > > - LOG(display,
> > > - "%s: populating plane data: pipe %s, plane
> > > %d, disabling\n",
> > > - igt_output_name(output),
> > > - kmstest_pipe_name(output->config.pipe),
> > > - plane->index);
> > > -
> > > - /* populate plane req */
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_ID, 0);
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_FB_ID, 0);
> > > -
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_SRC_X, IGT_FIXED(0, 0));
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_SRC_Y, IGT_FIXED(0, 0));
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_SRC_W, IGT_FIXED(0, 0));
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_SRC_H, IGT_FIXED(0, 0));
> > > -
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_X, 0);
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_Y, 0);
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_W, 0);
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_H, 0);
> > > -
> > > - } else if (plane->fb_changed || plane->position_changed
> > > ||
> > > - plane->size_changed) {
> > > -
> > > - src_x = IGT_FIXED(plane->fb->src_x, 0); /* src_x
> > > */
> > > - src_y = IGT_FIXED(plane->fb->src_y, 0); /* src_y
> > > */
> > > - src_w = IGT_FIXED(plane->fb->src_w, 0); /* src_w
> > > */
> > > - src_h = IGT_FIXED(plane->fb->src_h, 0); /* src_h
> > > */
> > > - crtc_x = plane->crtc_x;
> > > - crtc_y = plane->crtc_y;
> > > - crtc_w = plane->crtc_w;
> > > - crtc_h = plane->crtc_h;
> > > -
> > > - LOG(display,
> > > - "%s: populating plane data: %s.%d, fb %u,
> > > src = (%d, %d) "
> > > - "%ux%u dst = (%u, %u) %ux%u\n",
> > > - igt_output_name(output),
> > > - kmstest_pipe_name(output->config.pipe),
> > > - plane->index,
> > > - fb_id,
> > > - src_x >> 16, src_y >> 16, src_w >> 16, src_h
> > > >> 16,
> > > - crtc_x, crtc_y, crtc_w, crtc_h);
> > > -
> > > -
> > > - /* populate plane req */
> > > - igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_ID, crtc_id);
> > > + LOG(display,
> > > + "%s: populating plane data: %s.%d, fb %u, src = (%d,
> > > %d) "
> > > + "%ux%u dst = (%u, %u) %ux%u\n",
> > > + igt_output_name(output),
> > > + kmstest_pipe_name(output->config.pipe),
> > > + plane->index,
> > > + fb_id,
> > > + src_x >> 16, src_y >> 16, src_w >> 16, src_h >> 16,
> > > + crtc_x, crtc_y, crtc_w, crtc_h);
> > > +
> > > + if (plane->fb_changed) {
> > > + igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_ID, fb_id ? crtc_id : 0);
> > > igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_FB_ID, fb_id);
> > > + }
> > > +
> > > + if (plane->position_changed || plane->size_changed) {
> > > + uint32_t src_x = IGT_FIXED(plane->fb->src_x, 0);
> > > /* src_x */
> > > + uint32_t src_y = IGT_FIXED(plane->fb->src_y, 0);
> > > /* src_y */
> > > + uint32_t src_w = IGT_FIXED(plane->fb->src_w, 0);
> > > /* src_w */
> > > + uint32_t src_h = IGT_FIXED(plane->fb->src_h, 0);
> > > /* src_h */
> > > + int32_t crtc_x = plane->crtc_x;
> > > + int32_t crtc_y = plane->crtc_y;
> > > + uint32_t crtc_w = plane->crtc_w;
> > > + uint32_t crtc_h = plane->crtc_h;
> > >
> > > igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_SRC_X, src_x);
> > > igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_SRC_Y, src_y);
> > > @@ -1610,18 +1578,15 @@
> > > igt_atomic_prepare_plane_commit(igt_plane_t *plane, igt_output_t
> > > *output,
> > > igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_Y, crtc_y);
> > > igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_W, crtc_w);
> > > igt_atomic_populate_plane_req(req, plane,
> > > IGT_PLANE_CRTC_H, crtc_h);
> > > -
> > > - if (plane->rotation_changed)
> > > - igt_atomic_populate_plane_req(req,
> > > plane,
> > > - IGT_PLANE_ROTATION, plane-
> > > >rotation);
> > > -
> > > }
> > >
> > > + if (plane->rotation_changed)
> > > + igt_atomic_populate_plane_req(req, plane,
> > > + IGT_PLANE_ROTATION, plane->rotation);
> > > +
> > > plane->fb_changed = false;
> > > plane->position_changed = false;
> > > plane->size_changed = false;
> >
> > I missed that, but I think we need rotation_changed = false; here
> > too.
> >
> > > -
> > > - return;
> > > }
> > >
> > >
> > >
> >
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
More information about the Intel-gfx
mailing list