[Intel-gfx] [PATCH 03/16] drm/i915: Implement WaPixelRepeatModeFixForC0:chv
Jani Nikula
jani.nikula at linux.intel.com
Wed Mar 16 09:27:05 UTC 2016
On Tue, 15 Mar 2016, ville.syrjala at linux.intel.com wrote:
> [ text/plain ]
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> DPLL_MD(PIPE_C) is AWOL on CHV. Instead of fixing it someone added
> chicken bits to propagate the pixel multiplier from DPLL_MD(PIPE_B)
> to either pipe B or C. So do that to make pixel repeat work on pipes
> B and C. Pipe A is fine without any tricks.
>
> Fortunately the pixel repeat propagation appears to be a oneshot
> operation, so once the value has been written we can clear the
> chicken bits. So it is still possible to drive pipe B and C with
> different pixel multipliers simultaneosly.
>
> Looks like DPLL_VGA_MODE_DIS must also be set in DPLL(PIPE_B)
> for this to work. But since we keep that bit always set in all
> DPLLs there's no problem.
>
> This of course means we can't reliably read out the pixel multiplier
> for pipes B and C. That would make the state checker unhappy, so I
> added shadow copies of those registers in to dev_priv. The other
> option would have been to skip pixel multiplier, dpll_md an dotclock
> checks entirely on CHV, but that feels like a serious loss of cross
> checking, so just pretending that we have working DPLL MD registers
> seemed better. Obviously with the shadow copies we can't detect if
> the pixel multiplier was properly configured, nor can we take over
> its state from the BIOS, but hopefully people won't have displays
> that would be limitd to such crappy modes.
>
> There is one strange flicker still remaining. It's visible on
> pipe C/HDMID when HDMIB is enabled while driven by pipe B.
> It doesn't occur if pipe A drives HDMIB, nor is there any glitch
> on pipe B/HDMIB when port C/HDMID starts up. I don't have a board
> with HDMIC so not sure if it happens there too. So I'm not sure
> if it's somehow tied in with this strange linkage between pipe B
> and C. Sadly I was unable to find an enable sequence that would
> avoid the glitch, but at least it's not fatal ie. the output
> recovers afterwards.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
I didn't dig up the specs, but the code seems to do what the commit
message says.
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 7 +++++++
> drivers/gpu/drm/i915/i915_reg.h | 4 ++++
> drivers/gpu/drm/i915/intel_display.c | 30 ++++++++++++++++++++++++++----
> 3 files changed, 37 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 80b14f1ba302..31689e1b19e6 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1871,7 +1871,14 @@ struct drm_i915_private {
>
> u32 fdi_rx_config;
>
> + /* Shadow for DISPLAY_PHY_CONTROL which can't be safely read */
> u32 chv_phy_control;
> + /*
> + * Shadows for CHV DPLL_MD regs to keep the state
> + * checker somewhat working in the presence hardware
> + * crappiness (can't read out DPLL_MD for pipes B & C).
> + */
> + u32 chv_dpll_md[I915_MAX_PIPES];
>
> u32 suspend_count;
> bool suspended_to_idle;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 7dfc4007f3fa..f138588a88cd 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4778,6 +4778,10 @@ enum skl_disp_power_wells {
> #define CBR_PND_DEADLINE_DISABLE (1<<31)
> #define CBR_PWM_CLOCK_MUX_SELECT (1<<30)
>
> +#define CBR4_VLV _MMIO(VLV_DISPLAY_BASE + 0x70450)
> +#define CBR_DPLLBMD_PIPE_C (1<<29)
> +#define CBR_DPLLBMD_PIPE_B (1<<18)
> +
> /* FIFO watermark sizes etc */
> #define G4X_FIFO_LINE_SIZE 64
> #define I915_FIFO_LINE_SIZE 64
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 414ed5007e60..18158b0324ed 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1635,9 +1635,27 @@ static void chv_enable_pll(struct intel_crtc *crtc,
> if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
> DRM_ERROR("PLL %d failed to lock\n", pipe);
>
> - /* not sure when this should be written */
> - I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
> - POSTING_READ(DPLL_MD(pipe));
> + if (pipe != PIPE_A) {
> + /*
> + * WaPixelRepeatModeFixForC0:chv
> + *
> + * DPLLCMD is AWOL. Use chicken bits to propagate
> + * the value from DPLLBMD to either pipe B or C.
> + */
> + I915_WRITE(CBR4_VLV, pipe == PIPE_B ? CBR_DPLLBMD_PIPE_B : CBR_DPLLBMD_PIPE_C);
> + I915_WRITE(DPLL_MD(PIPE_B), pipe_config->dpll_hw_state.dpll_md);
> + I915_WRITE(CBR4_VLV, 0);
> + dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md;
> +
> + /*
> + * DPLLB VGA mode also seems to cause problems.
> + * We should always have it disabled.
> + */
> + WARN_ON((I915_READ(DPLL(PIPE_B)) & DPLL_VGA_MODE_DIS) == 0);
> + } else {
> + I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
> + POSTING_READ(DPLL_MD(pipe));
> + }
> }
>
> static int intel_num_dvo_pipes(struct drm_device *dev)
> @@ -8096,7 +8114,11 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
> i9xx_get_pfit_config(crtc, pipe_config);
>
> if (INTEL_INFO(dev)->gen >= 4) {
> - tmp = I915_READ(DPLL_MD(crtc->pipe));
> + /* No way to read it out on pipes B and C */
> + if (IS_CHERRYVIEW(dev) && crtc->pipe != PIPE_A)
> + tmp = dev_priv->chv_dpll_md[crtc->pipe];
> + else
> + tmp = I915_READ(DPLL_MD(crtc->pipe));
> pipe_config->pixel_multiplier =
> ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
> >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
--
Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list