[Intel-gfx] [PATCH] drm/i915: BXT DDI PHY sequence BUN

Vandana Kannan vandana.kannan at intel.com
Mon Mar 21 06:42:40 UTC 2016


According to the BSpec update, bit 7 of PORT_CL1CM_DW0 register needs to be
checked to ensure that the register is in accessible state.
Also, based on a BSpec update, changing the timeout value to
check iphypwrgood, from 10ms to wait for up to 100us.

Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
Reported-by: Philippe Lecluse <Philippe.Lecluse at intel.com>
Cc: Deak, Imre <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  |  1 +
 drivers/gpu/drm/i915/intel_ddi.c | 11 +++++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7dfc400..9a02bfc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1318,6 +1318,7 @@ enum skl_disp_power_wells {
 #define _PORT_CL1CM_DW0_A		0x162000
 #define _PORT_CL1CM_DW0_BC		0x6C000
 #define   PHY_POWER_GOOD		(1 << 16)
+#define   PHY_RESERVED			(1 << 7)
 #define BXT_PORT_CL1CM_DW0(phy)		_BXT_PHY((phy), _PORT_CL1CM_DW0_BC, \
 							_PORT_CL1CM_DW0_A)
 
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 62de9f4..354f949 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2669,9 +2669,16 @@ static void broxton_phy_init(struct drm_i915_private *dev_priv,
 	val |= GT_DISPLAY_POWER_ON(phy);
 	I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val);
 
-	/* Considering 10ms timeout until BSpec is updated */
-	if (wait_for(I915_READ(BXT_PORT_CL1CM_DW0(phy)) & PHY_POWER_GOOD, 10))
+	/*
+	 * HW team confirmed that the time to reach phypowergood status is
+	 * anywhere between 50 us and 100us.
+	 */
+	if (wait_for_atomic_us(((!(I915_READ(BXT_PORT_CL1CM_DW0(phy)) &
+				PHY_RESERVED)) &&
+				((I915_READ(BXT_PORT_CL1CM_DW0(phy)) &
+				  PHY_POWER_GOOD) == PHY_POWER_GOOD)), 100)) {
 		DRM_ERROR("timeout during PHY%d power on\n", phy);
+	}
 
 	for (port =  (phy == DPIO_PHY0 ? PORT_B : PORT_A);
 	     port <= (phy == DPIO_PHY0 ? PORT_C : PORT_A); port++) {
-- 
1.9.1



More information about the Intel-gfx mailing list