[Intel-gfx] [RFC PATCH 5/5] drm/i915/opregion: update cadl based on actually active outputs

[Jani Nikula]

Previously we've just shoved the first eight devices in DIDL to CADL
(list of active outputs). Some of the active outputs may have been left
outside of CADL. The problem is, some BIOS implementations prevent
laptop brightness hotkey propagation if the flat panel is not active.

Now that we have connector to acpi device id mapping covered, we can
update CADL based on which outputs are actually active.

Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h       |  2 +
 drivers/gpu/drm/i915/intel_display.c  |  2 +
 drivers/gpu/drm/i915/intel_opregion.c | 70 ++++++++++++++++++-----------------
 3 files changed, 41 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9d29ab06c99a..27287c7d62d9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3407,6 +3407,7 @@ extern int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
 					 bool enable);
 extern int intel_opregion_notify_adapter(struct drm_device *dev,
 					 pci_power_t state);
+void intel_opregion_update_cadl(struct drm_device *dev);
 #else
 static inline int intel_opregion_setup(struct drm_device *dev) { return 0; }
 static inline void intel_opregion_init(struct drm_device *dev) { return; }
@@ -3422,6 +3423,7 @@ intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state)
 {
 	return 0;
 }
+void intel_opregion_update_cadl(struct drm_device *dev) { return; }
 #endif
 
 /* intel_acpi.c */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 51f913fb199d..76f48c44782f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13646,6 +13646,8 @@ static int intel_atomic_commit(struct drm_device *dev,
 
 	drm_atomic_state_free(state);
 
+	intel_opregion_update_cadl(dev);
+
 	/* As one of the primary mmio accessors, KMS has a high likelihood
 	 * of triggering bugs in unclaimed access. After we finish
 	 * modesetting, see if an error has been flagged, and if so
diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index 1af9ed5c1d0a..d1ff264a82e6 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -650,24 +650,6 @@ static struct notifier_block intel_opregion_notifier = {
  * (version 3)
  */
 
-static u32 get_did(struct intel_opregion *opregion, int i)
-{
-	u32 did;
-
-	if (i < ARRAY_SIZE(opregion->acpi->didl)) {
-		did = opregion->acpi->didl[i];
-	} else {
-		i -= ARRAY_SIZE(opregion->acpi->didl);
-
-		if (WARN_ON(i >= ARRAY_SIZE(opregion->acpi->did2)))
-			return 0;
-
-		did = opregion->acpi->did2[i];
-	}
-
-	return did;
-}
-
 static void set_did(struct intel_opregion *opregion, int i, u32 val)
 {
 	if (i < ARRAY_SIZE(opregion->acpi->didl)) {
@@ -682,6 +664,14 @@ static void set_did(struct intel_opregion *opregion, int i, u32 val)
 	}
 }
 
+static void set_cad(struct intel_opregion *opregion, int i, u32 val)
+{
+	if (WARN_ON(i >= ARRAY_SIZE(opregion->acpi->cadl)))
+		return;
+
+	opregion->acpi->cadl[i] = val;
+}
+
 static u32 acpi_display_type(struct intel_connector *connector)
 {
 	u32 display_type;
@@ -769,23 +759,37 @@ static void intel_didl_outputs(struct drm_device *dev)
 		set_did(opregion, i, 0);
 }
 
-static void intel_setup_cadls(struct drm_device *dev)
+/* Update CADL to reflect active outputs. */
+void intel_opregion_update_cadl(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_opregion *opregion = &dev_priv->opregion;
-	int i = 0;
-	u32 disp_id;
-
-	/* Initialize the CADL field by duplicating the DIDL values.
-	 * Technically, this is not always correct as display outputs may exist,
-	 * but not active. This initialization is necessary for some Clevo
-	 * laptops that check this field before processing the brightness and
-	 * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if
-	 * there are less than eight devices. */
-	do {
-		disp_id = get_did(opregion, i);
-		opregion->acpi->cadl[i] = disp_id;
-	} while (++i < 8 && disp_id != 0);
+	struct intel_crtc *crtc;
+	int i = 0, max_active = ARRAY_SIZE(opregion->acpi->cadl);
+
+	for_each_intel_crtc(dev, crtc) {
+		struct intel_encoder *encoder;
+
+		if (!crtc->active)
+			continue;
+
+		for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
+			struct intel_connector *connector;
+
+			for_each_connector_on_encoder(dev, &encoder->base, connector) {
+				if (i >= max_active) {
+					DRM_DEBUG_KMS("too many outputs active\n");
+					return;
+				}
+
+				set_cad(opregion, i++, connector->acpi_device_id);
+			}
+		}
+	}
+
+	/* If fewer than max active outputs, the list must be null terminated */
+	if (i < max_active)
+		set_cad(opregion, i, 0);
 }
 
 void intel_opregion_init(struct drm_device *dev)
@@ -798,7 +802,7 @@ void intel_opregion_init(struct drm_device *dev)
 
 	if (opregion->acpi) {
 		intel_didl_outputs(dev);
-		intel_setup_cadls(dev);
+		intel_opregion_update_cadl(dev);
 
 		/* Notify BIOS we are ready to handle ACPI video ext notifs.
 		 * Right now, all the events are handled by the ACPI video module.
-- 
2.1.4