[Intel-gfx] [PATCH 1/2] drm/i915/BXT: Get pipe conf from the port registers
Ramalingam C
ramalingam.c at intel.com
Tue Mar 29 17:34:50 UTC 2016
At BXT DSI, PIPE registers are inactive. So we can't get the
PIPE's mode parameters from them. The possible option is
retriving them from the PORT registers.
The required changes are added for BXT in intel_dsi_get_config
(encoder->get_config).
Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
Signed-off-by: Uma Shankar <uma.shankar at intel.com>
---
Previously reviewed at https://patchwork.freedesktop.org/patch/75301/
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_display.c | 44 ++++++++++++++
drivers/gpu/drm/i915/intel_dsi.c | 104 ++++++++++++++++++++++++++++++++++
3 files changed, 149 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c839ce9..da3cdef 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8210,6 +8210,7 @@ enum skl_disp_power_wells {
#define BXT_PIPE_SELECT_SHIFT 7
#define BXT_PIPE_SELECT_MASK (7 << 7)
#define BXT_PIPE_SELECT(pipe) ((pipe) << 7)
+#define BXT_PORT_TO_PIPE(ctrl) ((ctrl & BXT_PIPE_SELECT_MASK) >> 7)
#define _MIPIA_DATA_ADDRESS (dev_priv->mipi_mmio_base + 0xb108)
#define _MIPIC_DATA_ADDRESS (dev_priv->mipi_mmio_base + 0xb908)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 29aa64b..c0627d6 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9941,11 +9941,40 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
}
}
+struct intel_encoder *bxt_get_dsi_encoder_for_crtc(struct intel_crtc *crtc,
+ struct intel_crtc_state *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *intel_encoder;
+ struct intel_dsi *intel_dsi;
+ enum port port;
+ u32 tmp;
+
+ for_each_intel_encoder(dev, intel_encoder) {
+ if (intel_encoder->type == INTEL_OUTPUT_DSI) {
+ intel_dsi = enc_to_intel_dsi(&intel_encoder->base);
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (!(I915_READ(BXT_MIPI_PORT_CTRL(port)) &
+ DPI_ENABLE))
+ break;
+
+ tmp = I915_READ(MIPI_CTRL(port));
+ if ((tmp & BXT_PIPE_SELECT_MASK) ==
+ BXT_PIPE_SELECT(crtc->pipe))
+ return intel_encoder;
+ }
+ }
+ }
+ return NULL;
+}
+
static bool haswell_get_pipe_config(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *intel_encoder, *attached_encoder = NULL;
enum intel_display_power_domain power_domain;
unsigned long power_domain_mask;
bool active;
@@ -9965,6 +9994,21 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
WARN_ON(active && pipe_config->has_dsi_encoder);
if (pipe_config->has_dsi_encoder)
active = true;
+
+ for_each_encoder_on_crtc(dev, &crtc->base, intel_encoder)
+ attached_encoder = intel_encoder;
+
+ /*
+ * attached_encoder will be NULL, if there is no modeset from
+ * the kernel bootup.
+ */
+ if (!attached_encoder && pipe_config->has_dsi_encoder)
+ attached_encoder =
+ bxt_get_dsi_encoder_for_crtc(crtc, pipe_config);
+
+ if (attached_encoder && attached_encoder->get_config)
+ attached_encoder->get_config(attached_encoder,
+ pipe_config);
}
if (!active)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 0de74e1..69a801e 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -740,14 +740,118 @@ out_put_power:
return active;
}
+/* return pixels equvalent to txbyteclkhs */
+static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count,
+ u16 burst_mode_ratio)
+{
+ return DIV_ROUND_UP((clk_hs * lane_count * 8 * 100),
+ (bpp * burst_mode_ratio));
+}
+
+static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config)
+{
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_display_mode *adjusted_mode =
+ &pipe_config->base.adjusted_mode;
+ struct intel_dsi *intel_dsi =
+ enc_to_intel_dsi(&encoder->base);
+ unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+ unsigned int lane_count = intel_dsi->lane_count;
+ enum port port;
+ enum pipe dsi_pipe;
+ u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
+ uint32_t tmp;
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (!(I915_READ(BXT_MIPI_PORT_CTRL(port)) & DPI_ENABLE))
+ continue;
+
+ /* In terms of pixels */
+ adjusted_mode->crtc_hdisplay =
+ I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
+ adjusted_mode->crtc_vdisplay =
+ I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
+ adjusted_mode->crtc_vtotal =
+ I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
+
+ hactive = adjusted_mode->crtc_hdisplay;
+ hfp = I915_READ(MIPI_HFP_COUNT(port));
+
+ /*
+ * meaningful for video mode non-burst sync pulse mode only,
+ * can be zero for non-burst sync events and burst modes
+ */
+ hsync = I915_READ(MIPI_HSYNC_PADDING_COUNT(port));
+ hbp = I915_READ(MIPI_HBP_COUNT(port));
+
+ /* horizontal values are in terms of high speed byte clock */
+ hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hbp = pixels_from_txbyteclkhs(hbp, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+
+ if (intel_dsi->dual_link) {
+ hfp *= 2;
+ hsync *= 2;
+ hbp *= 2;
+ }
+
+ /* vertical values are in terms of lines */
+ vfp = I915_READ(MIPI_VFP_COUNT(port));
+ vsync = I915_READ(MIPI_VSYNC_PADDING_COUNT(port));
+ vbp = I915_READ(MIPI_VBP_COUNT(port));
+
+ adjusted_mode->crtc_htotal = hactive + hfp + hsync + hbp;
+ adjusted_mode->crtc_hsync_start =
+ hfp + adjusted_mode->crtc_hdisplay;
+ adjusted_mode->crtc_hsync_end =
+ hsync + adjusted_mode->crtc_hsync_start;
+ adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay;
+ adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal;
+
+ adjusted_mode->crtc_vsync_start =
+ vfp + adjusted_mode->crtc_vdisplay;
+ adjusted_mode->crtc_vsync_end =
+ vsync + adjusted_mode->crtc_vsync_start;
+ adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay;
+ adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
+
+ pipe_config->pipe_bpp =
+ mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+
+ dsi_pipe = BXT_PORT_TO_PIPE(I915_READ(MIPI_CTRL(port)));
+ if (dsi_pipe > PIPE_C) {
+ DRM_ERROR("Invalid PIPE configured\n");
+ break;
+ }
+
+ tmp = I915_READ(PIPESRC(dsi_pipe));
+ pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
+ pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
+
+ pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
+ pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
+ break;
+ }
+}
+
+
static void intel_dsi_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
+ struct drm_device *dev = encoder->base.dev;
u32 pclk;
DRM_DEBUG_KMS("\n");
pipe_config->has_dsi_encoder = true;
+ if (IS_BROXTON(dev))
+ bxt_dsi_get_pipe_config(encoder, pipe_config);
+
/*
* DPLL_MD is not used in case of DSI, reading will get some default value
* set dpll_md = 0
--
1.7.9.5
More information about the Intel-gfx
mailing list