[Intel-gfx] [PATCH 15/16] drm/i915: Hook up pfit for DSI

Jani Nikula jani.nikula at linux.intel.com
Wed Mar 30 13:35:28 UTC 2016


On Tue, 15 Mar 2016, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Add the scaling mode property to DSI connectors, handle changes in the
> property value, and compute the panel fitter state during
> .compute_config().
>
> v2: Handle BXT as well
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>


> ---
>  drivers/gpu/drm/i915/intel_dsi.c | 74 +++++++++++++++++++++++++++++++++++++---
>  1 file changed, 69 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 1b4e83df4560..3823425a3e36 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -268,10 +268,12 @@ static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
>  static bool intel_dsi_compute_config(struct intel_encoder *encoder,
>  				     struct intel_crtc_state *pipe_config)
>  {
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
>  						   base);
>  	struct intel_connector *intel_connector = intel_dsi->attached_connector;
> -	struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> +	struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
> +	const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
>  	struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
>  	int ret;
>  
> @@ -279,9 +281,17 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
>  
>  	pipe_config->has_dsi_encoder = true;
>  
> -	if (fixed_mode)
> +	if (fixed_mode) {
>  		intel_fixed_panel_mode(fixed_mode, adjusted_mode);
>  
> +		if (HAS_GMCH_DISPLAY(dev_priv))
> +			intel_gmch_panel_fitting(crtc, pipe_config,
> +						 intel_connector->panel.fitting_mode);
> +		else
> +			intel_pch_panel_fitting(crtc, pipe_config,
> +						intel_connector->panel.fitting_mode);
> +	}
> +
>  	/* DSI uses short packets for sync events, so clear mode flags for DSI */
>  	adjusted_mode->flags = 0;
>  
> @@ -731,7 +741,7 @@ intel_dsi_mode_valid(struct drm_connector *connector,
>  		     struct drm_display_mode *mode)
>  {
>  	struct intel_connector *intel_connector = to_intel_connector(connector);
> -	struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> +	const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
>  	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
>  
>  	DRM_DEBUG_KMS("\n");
> @@ -1054,6 +1064,43 @@ static int intel_dsi_get_modes(struct drm_connector *connector)
>  	return 1;
>  }
>  
> +static int intel_dsi_set_property(struct drm_connector *connector,
> +				  struct drm_property *property,
> +				  uint64_t val)
> +{
> +	struct drm_device *dev = connector->dev;
> +	struct intel_connector *intel_connector = to_intel_connector(connector);
> +	struct drm_crtc *crtc;
> +	int ret;
> +
> +	ret = drm_object_property_set_value(&connector->base, property, val);
> +	if (ret)
> +		return ret;
> +
> +	if (property == dev->mode_config.scaling_mode_property) {
> +		if (val == DRM_MODE_SCALE_NONE) {
> +			DRM_DEBUG_KMS("no scaling not supported\n");
> +			return -EINVAL;
> +		}
> +
> +		if (intel_connector->panel.fitting_mode == val)
> +			return 0;
> +
> +		intel_connector->panel.fitting_mode = val;
> +	}
> +
> +	crtc = intel_attached_encoder(connector)->base.crtc;
> +	if (crtc && crtc->state->enable) {
> +		/*
> +		 * If the CRTC is enabled, the display will be changed
> +		 * according to the new panel fitting mode.
> +		 */
> +		intel_crtc_restore_mode(crtc);
> +	}
> +
> +	return 0;
> +}
> +
>  static void intel_dsi_connector_destroy(struct drm_connector *connector)
>  {
>  	struct intel_connector *intel_connector = to_intel_connector(connector);
> @@ -1096,11 +1143,25 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
>  	.detect = intel_dsi_detect,
>  	.destroy = intel_dsi_connector_destroy,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.set_property = intel_dsi_set_property,
>  	.atomic_get_property = intel_connector_atomic_get_property,
>  	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>  	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>  };
>  
> +static void intel_dsi_add_properties(struct intel_connector *connector)
> +{
> +	struct drm_device *dev = connector->base.dev;
> +
> +	if (connector->panel.fixed_mode) {
> +		drm_mode_create_scaling_mode_property(dev);
> +		drm_object_attach_property(&connector->base.base,
> +					   dev->mode_config.scaling_mode_property,
> +					   DRM_MODE_SCALE_ASPECT);
> +		connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
> +	}
> +}
> +
>  void intel_dsi_init(struct drm_device *dev)
>  {
>  	struct intel_dsi *intel_dsi;
> @@ -1218,8 +1279,6 @@ void intel_dsi_init(struct drm_device *dev)
>  
>  	intel_connector_attach_encoder(intel_connector, intel_encoder);
>  
> -	drm_connector_register(connector);
> -
>  	drm_panel_attach(intel_dsi->panel, connector);
>  
>  	mutex_lock(&dev->mode_config.mutex);
> @@ -1238,6 +1297,11 @@ void intel_dsi_init(struct drm_device *dev)
>  	}
>  
>  	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
> +
> +	intel_dsi_add_properties(intel_connector);
> +
> +	drm_connector_register(connector);
> +
>  	intel_panel_setup_backlight(connector, INVALID_PIPE);
>  
>  	return;

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list