[Intel-gfx] [PATCH v4 RESEND 5/5] drm/i915: Get rid of intel_dp_dpcd_read_wake()

Jani Nikula jani.nikula at linux.intel.com
Wed Mar 30 14:26:47 UTC 2016


On Mon, 28 Mar 2016, Lyude <cpaul at redhat.com> wrote:
> Since we've fixed up drm_dp_dpcd_read() to allow for retries when things
> timeout, there's no use for having this function anymore. Good riddens.
>
> Signed-off-by: Lyude <cpaul at redhat.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 79 ++++++++++++-----------------------------
>  1 file changed, 22 insertions(+), 57 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index f069a82..43c2933 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3184,47 +3184,14 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder)
>  }
>  
>  /*
> - * Native read with retry for link status and receiver capability reads for
> - * cases where the sink may still be asleep.
> - *
> - * Sinks are *supposed* to come up within 1ms from an off state, but we're also
> - * supposed to retry 3 times per the spec.
> - */
> -static ssize_t
> -intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
> -			void *buffer, size_t size)
> -{
> -	ssize_t ret;
> -	int i;
> -
> -	/*
> -	 * Sometime we just get the same incorrect byte repeated
> -	 * over the entire buffer. Doing just one throw away read
> -	 * initially seems to "solve" it.
> -	 */
> -	drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);

Ville, care to check this series (except patch 1) with your display to
see if it still works?

BR,
Jani.


> -
> -	for (i = 0; i < 3; i++) {
> -		ret = drm_dp_dpcd_read(aux, offset, buffer, size);
> -		if (ret == size)
> -			return ret;
> -		msleep(1);
> -	}
> -
> -	return ret;
> -}
> -
> -/*
>   * Fetch AUX CH registers 0x202 - 0x207 which contain
>   * link status information
>   */
>  bool
>  intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
>  {
> -	return intel_dp_dpcd_read_wake(&intel_dp->aux,
> -				       DP_LANE0_1_STATUS,
> -				       link_status,
> -				       DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
> +	return drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS, link_status,
> +				DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
>  }
>  
>  /* These are source-specific values. */
> @@ -3859,8 +3826,8 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	uint8_t rev;
>  
> -	if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd,
> -				    sizeof(intel_dp->dpcd)) < 0)
> +	if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd,
> +			     sizeof(intel_dp->dpcd)) < 0)
>  		return false; /* aux transfer failed */
>  
>  	DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
> @@ -3871,9 +3838,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
>  	/* Check if the panel supports PSR */
>  	memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd));
>  	if (is_edp(intel_dp)) {
> -		intel_dp_dpcd_read_wake(&intel_dp->aux, DP_PSR_SUPPORT,
> -					intel_dp->psr_dpcd,
> -					sizeof(intel_dp->psr_dpcd));
> +		drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT,
> +				 intel_dp->psr_dpcd,
> +				 sizeof(intel_dp->psr_dpcd));
>  		if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
>  			dev_priv->psr.sink_support = true;
>  			DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
> @@ -3884,9 +3851,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
>  			uint8_t frame_sync_cap;
>  
>  			dev_priv->psr.sink_support = true;
> -			intel_dp_dpcd_read_wake(&intel_dp->aux,
> -					DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
> -					&frame_sync_cap, 1);
> +			drm_dp_dpcd_read(&intel_dp->aux,
> +					 DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
> +					 &frame_sync_cap, 1);
>  			dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
>  			/* PSR2 needs frame sync as well */
>  			dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
> @@ -3902,15 +3869,13 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
>  	/* Intermediate frequency support */
>  	if (is_edp(intel_dp) &&
>  	    (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] &	DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
> -	    (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
> +	    (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
>  	    (rev >= 0x03)) { /* eDp v1.4 or higher */
>  		__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
>  		int i;
>  
> -		intel_dp_dpcd_read_wake(&intel_dp->aux,
> -				DP_SUPPORTED_LINK_RATES,
> -				sink_rates,
> -				sizeof(sink_rates));
> +		drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
> +				sink_rates, sizeof(sink_rates));
>  
>  		for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
>  			int val = le16_to_cpu(sink_rates[i]);
> @@ -3933,9 +3898,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
>  	if (intel_dp->dpcd[DP_DPCD_REV] == 0x10)
>  		return true; /* no per-port downstream info */
>  
> -	if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
> -				    intel_dp->downstream_ports,
> -				    DP_MAX_DOWNSTREAM_PORTS) < 0)
> +	if (drm_dp_dpcd_read(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
> +			     intel_dp->downstream_ports,
> +			     DP_MAX_DOWNSTREAM_PORTS) < 0)
>  		return false; /* downstream port status fetch failed */
>  
>  	return true;
> @@ -3949,11 +3914,11 @@ intel_dp_probe_oui(struct intel_dp *intel_dp)
>  	if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
>  		return;
>  
> -	if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3)
> +	if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3)
>  		DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
>  			      buf[0], buf[1], buf[2]);
>  
> -	if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3)
> +	if (drm_dp_dpcd_read(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3)
>  		DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
>  			      buf[0], buf[1], buf[2]);
>  }
> @@ -3969,7 +3934,7 @@ intel_dp_probe_mst(struct intel_dp *intel_dp)
>  	if (intel_dp->dpcd[DP_DPCD_REV] < 0x12)
>  		return false;
>  
> -	if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
> +	if (drm_dp_dpcd_read(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
>  		if (buf[0] & DP_MST_CAP) {
>  			DRM_DEBUG_KMS("Sink is MST capable\n");
>  			intel_dp->is_mst = true;
> @@ -4106,7 +4071,7 @@ stop:
>  static bool
>  intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
>  {
> -	return intel_dp_dpcd_read_wake(&intel_dp->aux,
> +	return drm_dp_dpcd_read(&intel_dp->aux,
>  				       DP_DEVICE_SERVICE_IRQ_VECTOR,
>  				       sink_irq_vector, 1) == 1;
>  }
> @@ -4116,7 +4081,7 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)
>  {
>  	int ret;
>  
> -	ret = intel_dp_dpcd_read_wake(&intel_dp->aux,
> +	ret = drm_dp_dpcd_read(&intel_dp->aux,
>  					     DP_SINK_COUNT_ESI,
>  					     sink_irq_vector, 14);
>  	if (ret != 14)
> @@ -4377,7 +4342,7 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp)
>  	    intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) {
>  		uint8_t reg;
>  
> -		if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_COUNT,
> +		if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT,
>  					    &reg, 1) < 0)
>  			return connector_status_unknown;

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list