[Intel-gfx] [PATCH v5 07/46] clk: pwm: use pwm_get_args() where appropriate

[Boris Brezillon]

The PWM framework has clarified the concept of reference PWM config
(the platform dependent config retrieved from the DT or the PWM
lookup table) and real PWM state.

Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.

This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has
just been requested (before the user calls pwm_config/enable/disable()).

Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
 drivers/clk/clk-pwm.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk-pwm.c b/drivers/clk/clk-pwm.c
index 8830458..ebcd738 100644
--- a/drivers/clk/clk-pwm.c
+++ b/drivers/clk/clk-pwm.c
@@ -56,6 +56,7 @@ static const struct clk_ops clk_pwm_ops = {
 static int clk_pwm_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
+	struct pwm_args pargs = { };
 	struct clk_init_data init;
 	struct clk_pwm *clk_pwm;
 	struct pwm_device *pwm;
@@ -71,22 +72,23 @@ static int clk_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pwm))
 		return PTR_ERR(pwm);
 
-	if (!pwm->period) {
+	pwm_get_args(pwm, &pargs);
+	if (!pargs.period) {
 		dev_err(&pdev->dev, "invalid PWM period\n");
 		return -EINVAL;
 	}
 
 	if (of_property_read_u32(node, "clock-frequency", &clk_pwm->fixed_rate))
-		clk_pwm->fixed_rate = NSEC_PER_SEC / pwm->period;
+		clk_pwm->fixed_rate = NSEC_PER_SEC / pargs.period;
 
-	if (pwm->period != NSEC_PER_SEC / clk_pwm->fixed_rate &&
-	    pwm->period != DIV_ROUND_UP(NSEC_PER_SEC, clk_pwm->fixed_rate)) {
+	if (pargs.period != NSEC_PER_SEC / clk_pwm->fixed_rate &&
+	    pargs.period != DIV_ROUND_UP(NSEC_PER_SEC, clk_pwm->fixed_rate)) {
 		dev_err(&pdev->dev,
 			"clock-frequency does not match PWM period\n");
 		return -EINVAL;
 	}
 
-	ret = pwm_config(pwm, (pwm->period + 1) >> 1, pwm->period);
+	ret = pwm_config(pwm, (pargs.period + 1) >> 1, pargs.period);
 	if (ret < 0)
 		return ret;
 
-- 
2.5.0