[Intel-gfx] [PATCH v5 01/12] drm/i915: Rewrite fb rotation GTT handling
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Tue May 3 15:39:50 UTC 2016
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Redo the fb rotation handling in order to:
- eliminate the NV12 special casing
- handle fb->offsets[] properly
- make the rotation handling reasier for the plane code
To achieve these goals we reduce intel_rotation_info to only contain
(for each plane) the rotated view width,height,stride in tile units,
and the page offset into the object where the plane starts. Each plane
is handled exactly the same way, no special casing for NV12 or other
formats. We then store the computed rotation_info under
intel_framebuffer so that we don't have to recompute it again.
To handle fb->offsets[] we treat them as a linear offsets and convert
them to x/y offsets from the start of the relevant GTT mapping (either
normal or rotated). We store the x/y offsets under intel_framebuffer,
and for some extra convenience we also store the rotated pitch (ie.
tile aligned plane height). So for each plane we have the normal
x/y offsets, rotated x/y offsets, and the rotated pitch. The normal
pitch is available already in fb->pitches[].
While we're gathering up all that extra information, we can also easily
compute the storage requirements for the framebuffer, so that we can
check that the object is big enough to hold it.
When it comes time to deal with the plane source coordinates, we first
rotate the clipped src coordinates to match the relevant GTT view
orientation, then add to them the fb x/y offsets. Next we compute
the aligned surface page offset, and as a result we're left with some
residual x/y offsets. Finally, if required by the hardware, we convert
the remaining x/y offsets into a linear offset.
For gen2/3 we simply skip computing the final page offset, and just
convert the src+fb x/y offsets directly into a linear offset since
that's what the hardware wants.
After this all platforms, incluing SKL+, compute these things in exactly
the same way (excluding alignemnt differences).
v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating
plane src coordinates
Drop some spurious changes that got left behind during
development
v3: Split out more changes to prep patches (Daniel)
s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity
Rename intel_surf_gtt_offset to intel_fb_gtt_offset
Kill the pointless 'plane' parameter from intel_fb_gtt_offset()
v4: Fix alignment vs. alignment-1 when calling
_intel_compute_tile_offset() from intel_fill_fb_info()
Pass the pitch in tiles in
stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info()
Pass the full width/height of the rotated area to
drm_rect_rotate() for clarity
Use u32 for more offsets
v5: Preserve the upper_32_bits()/lower_32_bits() handling for the
fb ggtt offset (Sivakumar)
Cc: Sivakumar Thulasimani <sivakumar.thulasimani at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/i915_gem_gtt.c | 51 ++---
drivers/gpu/drm/i915/i915_gem_gtt.h | 5 +-
drivers/gpu/drm/i915/intel_display.c | 368 ++++++++++++++++++++++++-----------
drivers/gpu/drm/i915/intel_drv.h | 19 +-
drivers/gpu/drm/i915/intel_sprite.c | 97 ++++-----
5 files changed, 331 insertions(+), 209 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 364cf8236021..7210cffcbaeb 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -3381,16 +3381,14 @@ rotate_pages(const dma_addr_t *in, unsigned int offset,
}
static struct sg_table *
-intel_rotate_fb_obj_pages(struct intel_rotation_info *rot_info,
+intel_rotate_fb_obj_pages(const struct intel_rotation_info *rot_info,
struct drm_i915_gem_object *obj)
{
- unsigned int size_pages = rot_info->plane[0].width * rot_info->plane[0].height;
- unsigned int size_pages_uv;
+ unsigned int size = intel_rotation_info_size(rot_info);
struct sg_page_iter sg_iter;
unsigned long i;
dma_addr_t *page_addr_list;
struct sg_table *st;
- unsigned int uv_start_page;
struct scatterlist *sg;
int ret = -ENOMEM;
@@ -3401,18 +3399,12 @@ intel_rotate_fb_obj_pages(struct intel_rotation_info *rot_info,
if (!page_addr_list)
return ERR_PTR(ret);
- /* Account for UV plane with NV12. */
- if (rot_info->pixel_format == DRM_FORMAT_NV12)
- size_pages_uv = rot_info->plane[1].width * rot_info->plane[1].height;
- else
- size_pages_uv = 0;
-
/* Allocate target SG list. */
st = kmalloc(sizeof(*st), GFP_KERNEL);
if (!st)
goto err_st_alloc;
- ret = sg_alloc_table(st, size_pages + size_pages_uv, GFP_KERNEL);
+ ret = sg_alloc_table(st, size, GFP_KERNEL);
if (ret)
goto err_sg_alloc;
@@ -3426,32 +3418,14 @@ intel_rotate_fb_obj_pages(struct intel_rotation_info *rot_info,
st->nents = 0;
sg = st->sgl;
- /* Rotate the pages. */
- sg = rotate_pages(page_addr_list, 0,
- rot_info->plane[0].width, rot_info->plane[0].height,
- rot_info->plane[0].width,
- st, sg);
-
- /* Append the UV plane if NV12. */
- if (rot_info->pixel_format == DRM_FORMAT_NV12) {
- uv_start_page = size_pages;
-
- /* Check for tile-row un-alignment. */
- if (offset_in_page(rot_info->uv_offset))
- uv_start_page--;
-
- rot_info->uv_start_page = uv_start_page;
-
- sg = rotate_pages(page_addr_list, rot_info->uv_start_page,
- rot_info->plane[1].width, rot_info->plane[1].height,
- rot_info->plane[1].width,
- st, sg);
+ for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++) {
+ sg = rotate_pages(page_addr_list, rot_info->plane[i].offset,
+ rot_info->plane[i].width, rot_info->plane[i].height,
+ rot_info->plane[i].stride, st, sg);
}
- DRM_DEBUG_KMS("Created rotated page mapping for object size %zu (%ux%u tiles, %u pages (%u plane 0)).\n",
- obj->base.size, rot_info->plane[0].width,
- rot_info->plane[0].height, size_pages + size_pages_uv,
- size_pages);
+ DRM_DEBUG_KMS("Created rotated page mapping for object size %zu (%ux%u tiles, %u pages)\n",
+ obj->base.size, rot_info->plane[0].width, rot_info->plane[0].height, size);
drm_free_large(page_addr_list);
@@ -3462,10 +3436,9 @@ err_sg_alloc:
err_st_alloc:
drm_free_large(page_addr_list);
- DRM_DEBUG_KMS("Failed to create rotated mapping for object size %zu! (%d) (%ux%u tiles, %u pages (%u plane 0))\n",
- obj->base.size, ret, rot_info->plane[0].width,
- rot_info->plane[0].height, size_pages + size_pages_uv,
- size_pages);
+ DRM_DEBUG_KMS("Failed to create rotated mapping for object size %zu! (%ux%u tiles, %u pages)\n",
+ obj->base.size, rot_info->plane[0].width, rot_info->plane[0].height, size);
+
return ERR_PTR(ret);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h
index 114850368bca..34bb03765e92 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.h
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.h
@@ -137,12 +137,9 @@ enum i915_ggtt_view_type {
};
struct intel_rotation_info {
- unsigned int uv_offset;
- uint32_t pixel_format;
- unsigned int uv_start_page;
struct {
/* tiles */
- unsigned int width, height;
+ unsigned int width, height, stride, offset;
} plane[2];
};
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8262b231d783..3c95a3663269 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2178,33 +2178,6 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
}
}
-static void
-intel_fill_fb_info(struct drm_i915_private *dev_priv,
- struct drm_framebuffer *fb)
-{
- struct intel_rotation_info *info = &to_intel_framebuffer(fb)->rot_info;
- unsigned int tile_size, tile_width, tile_height, cpp;
-
- tile_size = intel_tile_size(dev_priv);
-
- cpp = drm_format_plane_cpp(fb->pixel_format, 0);
- intel_tile_dims(dev_priv, &tile_width, &tile_height,
- fb->modifier[0], cpp);
-
- info->plane[0].width = DIV_ROUND_UP(fb->pitches[0], tile_width * cpp);
- info->plane[0].height = DIV_ROUND_UP(fb->height, tile_height);
-
- if (info->pixel_format == DRM_FORMAT_NV12) {
- cpp = drm_format_plane_cpp(fb->pixel_format, 1);
- intel_tile_dims(dev_priv, &tile_width, &tile_height,
- fb->modifier[1], cpp);
-
- info->uv_offset = fb->offsets[1];
- info->plane[1].width = DIV_ROUND_UP(fb->pitches[1], tile_width * cpp);
- info->plane[1].height = DIV_ROUND_UP(fb->height / 2, tile_height);
- }
-}
-
static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
{
if (INTEL_INFO(dev_priv)->gen >= 9)
@@ -2326,6 +2299,42 @@ void intel_unpin_fb_obj(struct drm_framebuffer *fb, unsigned int rotation)
}
/*
+ * Convert the x/y offsets into a linear offset.
+ * Only valid with 0/180 degree rotation, which is fine since linear
+ * offset is only used with linear buffers on pre-hsw and tiled buffers
+ * with gen2/3, and 90/270 degree rotations isn't supported on any of them.
+ */
+u32 intel_fb_xy_to_linear(int x, int y,
+ const struct drm_framebuffer *fb, int plane)
+{
+ unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
+ unsigned int pitch = fb->pitches[plane];
+
+ return y * pitch + x * cpp;
+}
+
+/*
+ * Add the x/y offsets derived from fb->offsets[] to the user
+ * specified plane src x/y offsets. The resulting x/y offsets
+ * specify the start of scanout from the beginning of the gtt mapping.
+ */
+void intel_add_fb_offsets(int *x, int *y,
+ const struct drm_framebuffer *fb, int plane,
+ unsigned int rotation)
+
+{
+ const struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+
+ if (intel_rotation_90_or_270(rotation)) {
+ *x += intel_fb->rotated[plane].x;
+ *y += intel_fb->rotated[plane].y;
+ } else {
+ *x += intel_fb->normal[plane].x;
+ *y += intel_fb->normal[plane].y;
+ }
+}
+
+/*
* Adjust the tile offset by moving the difference into
* the x/y offsets.
*
@@ -2361,18 +2370,24 @@ static u32 intel_adjust_tile_offset(int *x, int *y,
* In the 90/270 rotated case, x and y are assumed
* to be already rotated to match the rotated GTT view, and
* pitch is the tile_height aligned framebuffer height.
+ *
+ * This function is used when computing the derived information
+ * under intel_framebuffer, so using any of that information
+ * here is not allowed. Anything under drm_framebuffer can be
+ * used. This is why the user has to pass in the pitch since it
+ * is specified in the rotated orientation.
*/
-u32 intel_compute_tile_offset(int *x, int *y,
- const struct drm_framebuffer *fb, int plane,
- unsigned int pitch,
- unsigned int rotation)
+static u32 _intel_compute_tile_offset(const struct drm_i915_private *dev_priv,
+ int *x, int *y,
+ const struct drm_framebuffer *fb, int plane,
+ unsigned int pitch,
+ unsigned int rotation,
+ u32 alignment)
{
- const struct drm_i915_private *dev_priv = to_i915(fb->dev);
uint64_t fb_modifier = fb->modifier[plane];
unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
- u32 offset, offset_aligned, alignment;
+ u32 offset, offset_aligned;
- alignment = intel_surf_alignment(dev_priv, fb_modifier);
if (alignment)
alignment--;
@@ -2414,6 +2429,141 @@ u32 intel_compute_tile_offset(int *x, int *y,
return offset_aligned;
}
+u32 intel_compute_tile_offset(int *x, int *y,
+ const struct drm_framebuffer *fb, int plane,
+ unsigned int pitch,
+ unsigned int rotation)
+{
+ const struct drm_i915_private *dev_priv = to_i915(fb->dev);
+ u32 alignment = intel_surf_alignment(dev_priv, fb->modifier[plane]);
+
+ return _intel_compute_tile_offset(dev_priv, x, y, fb, plane, pitch,
+ rotation, alignment);
+}
+
+/* Convert the fb->offset[] linear offset into x/y offsets */
+static void intel_fb_offset_to_xy(int *x, int *y,
+ const struct drm_framebuffer *fb, int plane)
+{
+ unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
+ unsigned int pitch = fb->pitches[plane];
+ u32 linear_offset = fb->offsets[plane];
+
+ *y = linear_offset / pitch;
+ *x = linear_offset % pitch / cpp;
+}
+
+static int
+intel_fill_fb_info(struct drm_i915_private *dev_priv,
+ struct drm_framebuffer *fb)
+{
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct intel_rotation_info *rot_info = &intel_fb->rot_info;
+ u32 gtt_offset_rotated = 0;
+ unsigned int max_size = 0;
+ uint32_t format = fb->pixel_format;
+ int i, num_planes = drm_format_num_planes(format);
+ unsigned int tile_size = intel_tile_size(dev_priv);
+
+ for (i = 0; i < num_planes; i++) {
+ unsigned int width, height;
+ unsigned int cpp, size;
+ u32 offset;
+ int x, y;
+
+ cpp = drm_format_plane_cpp(format, i);
+ width = drm_format_plane_width(fb->width, format, i);
+ height = drm_format_plane_height(fb->height, format, i);
+
+ intel_fb_offset_to_xy(&x, &y, fb, i);
+
+ /*
+ * First pixel of the framebuffer from
+ * the start of the normal gtt mapping.
+ */
+ intel_fb->normal[i].x = x;
+ intel_fb->normal[i].y = y;
+
+ offset = _intel_compute_tile_offset(dev_priv, &x, &y,
+ fb, 0, fb->pitches[i],
+ BIT(DRM_ROTATE_0), tile_size);
+ offset /= tile_size;
+
+ if (fb->modifier[i] != DRM_FORMAT_MOD_NONE) {
+ unsigned int tile_width, tile_height;
+ unsigned int pitch_tiles;
+ struct drm_rect r;
+
+ intel_tile_dims(dev_priv, &tile_width, &tile_height,
+ fb->modifier[i], cpp);
+
+ rot_info->plane[i].offset = offset;
+ rot_info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i], tile_width * cpp);
+ rot_info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
+ rot_info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
+
+ intel_fb->rotated[i].pitch =
+ rot_info->plane[i].height * tile_height;
+
+ /* how many tiles does this plane need */
+ size = rot_info->plane[i].stride * rot_info->plane[i].height;
+ /*
+ * If the plane isn't horizontally tile aligned,
+ * we need one more tile.
+ */
+ if (x != 0)
+ size++;
+
+ /* rotate the x/y offsets to match the GTT view */
+ r.x1 = x;
+ r.y1 = y;
+ r.x2 = x + width;
+ r.y2 = y + height;
+ drm_rect_rotate(&r,
+ rot_info->plane[i].width * tile_width,
+ rot_info->plane[i].height * tile_height,
+ BIT(DRM_ROTATE_270));
+ x = r.x1;
+ y = r.y1;
+
+ /* rotate the tile dimensions to match the GTT view */
+ pitch_tiles = intel_fb->rotated[i].pitch / tile_height;
+ swap(tile_width, tile_height);
+
+ /*
+ * We only keep the x/y offsets, so push all of the
+ * gtt offset into the x/y offsets.
+ */
+ intel_adjust_tile_offset(&x, &y, tile_size,
+ tile_width, tile_height, pitch_tiles,
+ gtt_offset_rotated * tile_size, 0);
+
+ gtt_offset_rotated += rot_info->plane[i].width * rot_info->plane[i].height;
+
+ /*
+ * First pixel of the framebuffer from
+ * the start of the rotated gtt mapping.
+ */
+ intel_fb->rotated[i].x = x;
+ intel_fb->rotated[i].y = y;
+ } else {
+ size = DIV_ROUND_UP((y + height) * fb->pitches[i] +
+ x * cpp, tile_size);
+ }
+
+ /* how many tiles in total needed in the bo */
+ max_size = max(max_size, offset + size);
+ }
+
+ if (max_size * tile_size > to_intel_framebuffer(fb)->obj->base.size) {
+ DRM_DEBUG("fb too big for bo (need %u bytes, have %zu bytes)\n",
+ max_size * tile_size, to_intel_framebuffer(fb)->obj->base.size);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int i9xx_format_to_fourcc(int format)
{
switch (format) {
@@ -2649,7 +2799,6 @@ static void i9xx_update_primary_plane(struct drm_plane *primary,
u32 dspcntr;
i915_reg_t reg = DSPCNTR(plane);
unsigned int rotation = plane_state->base.rotation;
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
int x = plane_state->src.x1 >> 16;
int y = plane_state->src.y1 >> 16;
@@ -2709,30 +2858,25 @@ static void i9xx_update_primary_plane(struct drm_plane *primary,
if (IS_G4X(dev))
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
- linear_offset = y * fb->pitches[0] + x * cpp;
+ intel_add_fb_offsets(&x, &y, fb, 0, rotation);
- if (INTEL_INFO(dev)->gen >= 4) {
+ if (INTEL_INFO(dev)->gen >= 4)
intel_crtc->dspaddr_offset =
intel_compute_tile_offset(&x, &y, fb, 0,
fb->pitches[0], rotation);
- linear_offset -= intel_crtc->dspaddr_offset;
- } else {
- intel_crtc->dspaddr_offset = linear_offset;
- }
if (rotation == BIT(DRM_ROTATE_180)) {
dspcntr |= DISPPLANE_ROTATE_180;
x += (crtc_state->pipe_src_w - 1);
y += (crtc_state->pipe_src_h - 1);
-
- /* Finding the last pixel of the last line of the display
- data and adding to linear_offset*/
- linear_offset +=
- (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
- (crtc_state->pipe_src_w - 1) * cpp;
}
+ linear_offset = intel_fb_xy_to_linear(x, y, fb, 0);
+
+ if (INTEL_INFO(dev)->gen < 4)
+ intel_crtc->dspaddr_offset = linear_offset;
+
intel_crtc->adjusted_x = x;
intel_crtc->adjusted_y = y;
@@ -2741,7 +2885,8 @@ static void i9xx_update_primary_plane(struct drm_plane *primary,
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
if (INTEL_INFO(dev)->gen >= 4) {
I915_WRITE(DSPSURF(plane),
- i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_fb_gtt_offset(fb, rotation) +
+ intel_crtc->dspaddr_offset);
I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
I915_WRITE(DSPLINOFF(plane), linear_offset);
} else
@@ -2779,7 +2924,6 @@ static void ironlake_update_primary_plane(struct drm_plane *primary,
u32 dspcntr;
i915_reg_t reg = DSPCNTR(plane);
unsigned int rotation = plane_state->base.rotation;
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
int x = plane_state->src.x1 >> 16;
int y = plane_state->src.y1 >> 16;
@@ -2818,26 +2962,23 @@ static void ironlake_update_primary_plane(struct drm_plane *primary,
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
- linear_offset = y * fb->pitches[0] + x * cpp;
+ intel_add_fb_offsets(&x, &y, fb, 0, rotation);
+
intel_crtc->dspaddr_offset =
intel_compute_tile_offset(&x, &y, fb, 0,
fb->pitches[0], rotation);
- linear_offset -= intel_crtc->dspaddr_offset;
+
if (rotation == BIT(DRM_ROTATE_180)) {
dspcntr |= DISPPLANE_ROTATE_180;
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
x += (crtc_state->pipe_src_w - 1);
y += (crtc_state->pipe_src_h - 1);
-
- /* Finding the last pixel of the last line of the display
- data and adding to linear_offset*/
- linear_offset +=
- (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
- (crtc_state->pipe_src_w - 1) * cpp;
}
}
+ linear_offset = intel_fb_xy_to_linear(x, y, fb, 0);
+
intel_crtc->adjusted_x = x;
intel_crtc->adjusted_y = y;
@@ -2845,7 +2986,8 @@ static void ironlake_update_primary_plane(struct drm_plane *primary,
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
I915_WRITE(DSPSURF(plane),
- i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_fb_gtt_offset(fb, rotation) +
+ intel_crtc->dspaddr_offset);
if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
} else {
@@ -2867,28 +3009,16 @@ u32 intel_fb_stride_alignment(const struct drm_i915_private *dev_priv,
}
}
-u32 intel_plane_obj_offset(struct intel_plane *intel_plane,
- struct drm_i915_gem_object *obj,
- unsigned int plane)
+u32 intel_fb_gtt_offset(struct drm_framebuffer *fb,
+ unsigned int rotation)
{
+ struct drm_i915_gem_object *obj = intel_fb_obj(fb);
struct i915_ggtt_view view;
- struct i915_vma *vma;
u64 offset;
- intel_fill_fb_ggtt_view(&view, intel_plane->base.state->fb,
- intel_plane->base.state->rotation);
-
- vma = i915_gem_obj_to_ggtt_view(obj, &view);
- if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
- view.type))
- return -1;
-
- offset = vma->node.start;
+ intel_fill_fb_ggtt_view(&view, fb, rotation);
- if (plane == 1) {
- offset += vma->ggtt_view.params.rotated.uv_start_page *
- PAGE_SIZE;
- }
+ offset = i915_gem_obj_ggtt_offset_view(obj, &view);
WARN_ON(upper_32_bits(offset));
@@ -3011,12 +3141,9 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_framebuffer *fb = plane_state->base.fb;
- struct drm_i915_gem_object *obj = intel_fb_obj(fb);
int pipe = intel_crtc->pipe;
u32 plane_ctl, stride_div, stride;
- u32 tile_height, plane_offset, plane_size;
unsigned int rotation = plane_state->base.rotation;
- int x_offset, y_offset;
u32 surf_addr;
int scaler_id = plane_state->scaler_id;
int src_x = plane_state->src.x1 >> 16;
@@ -3037,36 +3164,49 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
plane_ctl |= skl_plane_ctl_rotation(rotation);
- stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
- fb->pixel_format);
- surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
-
- WARN_ON(drm_rect_width(&plane_state->src) == 0);
-
if (intel_rotation_90_or_270(rotation)) {
+ struct drm_rect r = {
+ .x1 = src_x,
+ .x2 = src_x + src_w,
+ .y1 = src_y,
+ .y2 = src_y + src_h,
+ };
int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+
+ /* Rotate src coordinates to match rotated GTT view */
+ drm_rect_rotate(&r, fb->width, fb->height, BIT(DRM_ROTATE_270));
- /* stride = Surface height in tiles */
- tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp);
- stride = DIV_ROUND_UP(fb->height, tile_height);
- x_offset = stride * tile_height - src_y - src_h;
- y_offset = src_x;
- plane_size = (src_w - 1) << 16 | (src_h - 1);
+ src_x = r.x1;
+ src_y = r.y1;
+ src_w = drm_rect_width(&r);
+ src_h = drm_rect_height(&r);
+
+ stride_div = intel_tile_height(dev_priv, fb->modifier[0], cpp);
+ stride = intel_fb->rotated[0].pitch;
} else {
- stride = fb->pitches[0] / stride_div;
- x_offset = src_x;
- y_offset = src_y;
- plane_size = (src_h - 1) << 16 | (src_w - 1);
+ stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
+ fb->pixel_format);
+ stride = fb->pitches[0];
}
- plane_offset = y_offset << 16 | x_offset;
- intel_crtc->adjusted_x = x_offset;
- intel_crtc->adjusted_y = y_offset;
+ intel_add_fb_offsets(&src_x, &src_y, fb, 0, rotation);
+ surf_addr = intel_compute_tile_offset(&src_x, &src_y, fb, 0,
+ stride, rotation);
+
+ /* Sizes are 0 based */
+ src_w--;
+ src_h--;
+ dst_w--;
+ dst_h--;
+
+ intel_crtc->adjusted_x = src_x;
+ intel_crtc->adjusted_y = src_y;
I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
- I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
- I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
- I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
+ I915_WRITE(PLANE_OFFSET(pipe, 0), (src_y << 16) | src_x);
+ I915_WRITE(PLANE_STRIDE(pipe, 0), stride / stride_div);
+ I915_WRITE(PLANE_SIZE(pipe, 0), (src_h << 16) | src_w);
if (scaler_id >= 0) {
uint32_t ps_ctrl = 0;
@@ -3083,7 +3223,8 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
}
- I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
+ I915_WRITE(PLANE_SURF(pipe, 0),
+ intel_fb_gtt_offset(fb, rotation) + surf_addr);
POSTING_READ(PLANE_SURF(pipe, 0));
}
@@ -11285,7 +11426,7 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
const enum pipe pipe = intel_crtc->pipe;
- u32 ctl, stride, tile_height;
+ u32 ctl, stride;
ctl = I915_READ(PLANE_CTL(pipe, 0));
ctl &= ~PLANE_CTL_TILED_MASK;
@@ -11310,9 +11451,11 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
* linear buffers or in number of tiles for tiled buffers.
*/
if (intel_rotation_90_or_270(rotation)) {
- /* stride = Surface height in tiles */
- tile_height = intel_tile_height(dev_priv, fb->modifier[0], 0);
- stride = DIV_ROUND_UP(fb->height, tile_height);
+ int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+
+ stride = intel_fb->rotated[0].pitch /
+ intel_tile_height(dev_priv, fb->modifier[0], cpp);
} else {
stride = fb->pitches[0] /
intel_fb_stride_alignment(dev_priv, fb->modifier[0],
@@ -11642,8 +11785,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
if (ret)
goto cleanup_pending;
- work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
- obj, 0);
+ work->gtt_offset = intel_fb_gtt_offset(fb, primary->state->rotation);
work->gtt_offset += intel_crtc->dspaddr_offset;
if (mmio_flip) {
@@ -14716,7 +14858,6 @@ static int intel_framebuffer_init(struct drm_device *dev,
struct drm_i915_gem_object *obj)
{
struct drm_i915_private *dev_priv = to_i915(dev);
- unsigned int aligned_height;
int ret;
u32 pitch_limit, stride_alignment;
@@ -14841,17 +14982,12 @@ static int intel_framebuffer_init(struct drm_device *dev,
if (mode_cmd->offsets[0] != 0)
return -EINVAL;
- aligned_height = intel_fb_align_height(dev, mode_cmd->height,
- mode_cmd->pixel_format,
- mode_cmd->modifier[0]);
- /* FIXME drm helper for size checks (especially planar formats)? */
- if (obj->base.size < aligned_height * mode_cmd->pitches[0])
- return -EINVAL;
-
drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
intel_fb->obj = obj;
- intel_fill_fb_info(dev_priv, &intel_fb->base);
+ ret = intel_fill_fb_info(dev_priv, &intel_fb->base);
+ if (ret)
+ return ret;
ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
if (ret) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 21dee3f89e84..2f1178dbd328 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -153,6 +153,16 @@ struct intel_framebuffer {
struct drm_framebuffer base;
struct drm_i915_gem_object *obj;
struct intel_rotation_info rot_info;
+
+ /* for each plane in the normal GTT view */
+ struct {
+ unsigned int x, y;
+ } normal[2];
+ /* for each plane in the rotated GTT view */
+ struct {
+ unsigned int x, y;
+ unsigned int pitch; /* pixels */
+ } rotated[2];
};
struct intel_fbdev {
@@ -1115,6 +1125,11 @@ int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
const char *name, u32 reg, int ref_freq);
extern const struct drm_plane_funcs intel_plane_funcs;
void intel_init_display_hooks(struct drm_i915_private *dev_priv);
+unsigned int intel_fb_xy_to_linear(int x, int y,
+ const struct drm_framebuffer *fb, int plane);
+void intel_add_fb_offsets(int *x, int *y,
+ const struct drm_framebuffer *fb, int plane,
+ unsigned int rotation);
unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info);
bool intel_has_pending_fb_unpin(struct drm_device *dev);
void intel_mark_busy(struct drm_device *dev);
@@ -1268,9 +1283,7 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
-u32 intel_plane_obj_offset(struct intel_plane *intel_plane,
- struct drm_i915_gem_object *obj,
- unsigned int plane);
+u32 intel_fb_gtt_offset(struct drm_framebuffer *fb, unsigned int rotation);
u32 skl_plane_ctl_format(uint32_t pixel_format);
u32 skl_plane_ctl_tiling(uint64_t fb_modifier);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 0f3e2303e0e9..806b0d50fb50 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -186,15 +186,13 @@ skl_update_plane(struct drm_plane *drm_plane,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
struct drm_framebuffer *fb = plane_state->base.fb;
- struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane + 1;
u32 plane_ctl, stride_div, stride;
const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
u32 surf_addr;
- u32 tile_height, plane_offset, plane_size;
unsigned int rotation = plane_state->base.rotation;
- int x_offset, y_offset;
int crtc_x = plane_state->dst.x1;
int crtc_y = plane_state->dst.y1;
uint32_t crtc_w = drm_rect_width(&plane_state->dst);
@@ -215,15 +213,6 @@ skl_update_plane(struct drm_plane *drm_plane,
plane_ctl |= skl_plane_ctl_rotation(rotation);
- stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
- fb->pixel_format);
-
- /* Sizes are 0 based */
- src_w--;
- src_h--;
- crtc_w--;
- crtc_h--;
-
if (key->flags) {
I915_WRITE(PLANE_KEYVAL(pipe, plane), key->min_value);
I915_WRITE(PLANE_KEYMAX(pipe, plane), key->max_value);
@@ -235,28 +224,44 @@ skl_update_plane(struct drm_plane *drm_plane,
else if (key->flags & I915_SET_COLORKEY_SOURCE)
plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
- surf_addr = intel_plane_obj_offset(intel_plane, obj, 0);
-
if (intel_rotation_90_or_270(rotation)) {
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
-
- /* stride: Surface height in tiles */
- tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp);
- stride = DIV_ROUND_UP(fb->height, tile_height);
- plane_size = (src_w << 16) | src_h;
- x_offset = stride * tile_height - y - (src_h + 1);
- y_offset = x;
+ struct drm_rect r = {
+ .x1 = x,
+ .x2 = x + src_w,
+ .y1 = y,
+ .y2 = y + src_h,
+ };
+ unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
+
+ /* Rotate src coordinates to match rotated GTT view */
+ drm_rect_rotate(&r, fb->width, fb->height, BIT(DRM_ROTATE_270));
+
+ x = r.x1;
+ y = r.y1;
+ src_w = drm_rect_width(&r);
+ src_h = drm_rect_height(&r);
+
+ stride_div = intel_tile_height(dev_priv, fb->modifier[0], cpp);
+ stride = intel_fb->rotated[0].pitch;
} else {
- stride = fb->pitches[0] / stride_div;
- plane_size = (src_h << 16) | src_w;
- x_offset = x;
- y_offset = y;
+ stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
+ fb->pixel_format);
+ stride = fb->pitches[0];
}
- plane_offset = y_offset << 16 | x_offset;
- I915_WRITE(PLANE_OFFSET(pipe, plane), plane_offset);
- I915_WRITE(PLANE_STRIDE(pipe, plane), stride);
- I915_WRITE(PLANE_SIZE(pipe, plane), plane_size);
+ intel_add_fb_offsets(&x, &y, fb, 0, rotation);
+ surf_addr = intel_compute_tile_offset(&x, &y, fb, 0,
+ stride, rotation);
+
+ /* Sizes are 0 based */
+ src_w--;
+ src_h--;
+ crtc_w--;
+ crtc_h--;
+
+ I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
+ I915_WRITE(PLANE_STRIDE(pipe, plane), stride / stride_div);
+ I915_WRITE(PLANE_SIZE(pipe, plane), (src_h << 16) | src_w);
/* program plane scaler */
if (plane_state->scaler_id >= 0) {
@@ -278,7 +283,8 @@ skl_update_plane(struct drm_plane *drm_plane,
}
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
- I915_WRITE(PLANE_SURF(pipe, plane), surf_addr);
+ I915_WRITE(PLANE_SURF(pipe, plane),
+ intel_fb_gtt_offset(fb, rotation) + surf_addr);
POSTING_READ(PLANE_SURF(pipe, plane));
}
@@ -351,7 +357,6 @@ vlv_update_plane(struct drm_plane *dplane,
u32 sprctl;
u32 sprsurf_offset, linear_offset;
unsigned int rotation = dplane->state->rotation;
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
int crtc_x = plane_state->dst.x1;
int crtc_y = plane_state->dst.y1;
@@ -422,19 +427,19 @@ vlv_update_plane(struct drm_plane *dplane,
crtc_w--;
crtc_h--;
- linear_offset = y * fb->pitches[0] + x * cpp;
+ intel_add_fb_offsets(&x, &y, fb, 0, rotation);
sprsurf_offset = intel_compute_tile_offset(&x, &y, fb, 0,
fb->pitches[0], rotation);
- linear_offset -= sprsurf_offset;
if (rotation == BIT(DRM_ROTATE_180)) {
sprctl |= SP_ROTATE_180;
x += src_w;
y += src_h;
- linear_offset += src_h * fb->pitches[0] + src_w * cpp;
}
+ linear_offset = intel_fb_xy_to_linear(x, y, fb, 0);
+
if (key->flags) {
I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value);
I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value);
@@ -459,8 +464,8 @@ vlv_update_plane(struct drm_plane *dplane,
I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w);
I915_WRITE(SPCNTR(pipe, plane), sprctl);
- I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) +
- sprsurf_offset);
+ I915_WRITE(SPSURF(pipe, plane),
+ intel_fb_gtt_offset(fb, rotation) + sprsurf_offset);
POSTING_READ(SPSURF(pipe, plane));
}
@@ -493,7 +498,6 @@ ivb_update_plane(struct drm_plane *plane,
u32 sprctl, sprscale = 0;
u32 sprsurf_offset, linear_offset;
unsigned int rotation = plane_state->base.rotation;
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
int crtc_x = plane_state->dst.x1;
int crtc_y = plane_state->dst.y1;
@@ -555,10 +559,9 @@ ivb_update_plane(struct drm_plane *plane,
if (crtc_w != src_w || crtc_h != src_h)
sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h;
- linear_offset = y * fb->pitches[0] + x * cpp;
+ intel_add_fb_offsets(&x, &y, fb, 0, rotation);
sprsurf_offset = intel_compute_tile_offset(&x, &y, fb, 0,
fb->pitches[0], rotation);
- linear_offset -= sprsurf_offset;
if (rotation == BIT(DRM_ROTATE_180)) {
sprctl |= SPRITE_ROTATE_180;
@@ -567,10 +570,11 @@ ivb_update_plane(struct drm_plane *plane,
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
x += src_w;
y += src_h;
- linear_offset += src_h * fb->pitches[0] + src_w * cpp;
}
}
+ linear_offset = intel_fb_xy_to_linear(x, y, fb, 0);
+
if (key->flags) {
I915_WRITE(SPRKEYVAL(pipe), key->min_value);
I915_WRITE(SPRKEYMAX(pipe), key->max_value);
@@ -599,7 +603,7 @@ ivb_update_plane(struct drm_plane *plane,
I915_WRITE(SPRSCALE(pipe), sprscale);
I915_WRITE(SPRCTL(pipe), sprctl);
I915_WRITE(SPRSURF(pipe),
- i915_gem_obj_ggtt_offset(obj) + sprsurf_offset);
+ intel_fb_gtt_offset(fb, rotation) + sprsurf_offset);
POSTING_READ(SPRSURF(pipe));
}
@@ -634,7 +638,6 @@ ilk_update_plane(struct drm_plane *plane,
u32 dvscntr, dvsscale;
u32 dvssurf_offset, linear_offset;
unsigned int rotation = plane_state->base.rotation;
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
int crtc_x = plane_state->dst.x1;
int crtc_y = plane_state->dst.y1;
@@ -692,19 +695,19 @@ ilk_update_plane(struct drm_plane *plane,
if (crtc_w != src_w || crtc_h != src_h)
dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h;
- linear_offset = y * fb->pitches[0] + x * cpp;
+ intel_add_fb_offsets(&x, &y, fb, 0, rotation);
dvssurf_offset = intel_compute_tile_offset(&x, &y, fb, 0,
fb->pitches[0], rotation);
- linear_offset -= dvssurf_offset;
if (rotation == BIT(DRM_ROTATE_180)) {
dvscntr |= DVS_ROTATE_180;
x += src_w;
y += src_h;
- linear_offset += src_h * fb->pitches[0] + src_w * cpp;
}
+ linear_offset = intel_fb_xy_to_linear(x, y, fb, 0);
+
if (key->flags) {
I915_WRITE(DVSKEYVAL(pipe), key->min_value);
I915_WRITE(DVSKEYMAX(pipe), key->max_value);
@@ -728,7 +731,7 @@ ilk_update_plane(struct drm_plane *plane,
I915_WRITE(DVSSCALE(pipe), dvsscale);
I915_WRITE(DVSCNTR(pipe), dvscntr);
I915_WRITE(DVSSURF(pipe),
- i915_gem_obj_ggtt_offset(obj) + dvssurf_offset);
+ intel_fb_gtt_offset(fb, rotation) + dvssurf_offset);
POSTING_READ(DVSSURF(pipe));
}
--
2.7.4
More information about the Intel-gfx
mailing list