[Intel-gfx] [PATCH 14/19] drm/i915: Stop setting wraparound seqno on initialisation

[Chris Wilson]

We have testcases to ensure that seqno wraparound works fine, so we can
forgo forcing everyone to encounter seqno wraparound during early
uptime. seqno wraparound incurs a full GPU stall so not forcing it
will eliminate one jitter from the early system. Using the testcases, we
have very deterministic testing which given how difficult it would be to
debug an issue (GPU hang) stemming from a wraparound using pure
postmortem analysis I see no value in forcing a wrap during boot.

Advancing the global next_seqno after a GPU reset is equally pointless.

References? https://bugs.freedesktop.org/show_bug.cgi?id=95023
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_gem.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index e3dbcf6178bc..8c8b44883657 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4847,12 +4847,6 @@ i915_gem_init_hw(struct drm_device *dev)
 		}
 	}
 
-	/*
-	 * Increment the next seqno by 0x100 so we have a visible break
-	 * on re-initialisation
-	 */
-	ret = i915_gem_set_seqno(dev, dev_priv->next_seqno+0x100);
-
 out:
 	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
 	return ret;
@@ -4997,14 +4991,6 @@ i915_gem_load_init(struct drm_device *dev)
 
 	dev_priv->relative_constants_mode = I915_EXEC_CONSTANTS_REL_GENERAL;
 
-	/*
-	 * Set initial sequence number for requests.
-	 * Using this number allows the wraparound to happen early,
-	 * catching any obvious problems.
-	 */
-	dev_priv->next_seqno = ((u32)~0 - 0x1100);
-	dev_priv->last_seqno = ((u32)~0 - 0x1101);
-
 	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
 
 	init_waitqueue_head(&dev_priv->pending_flip_queue);
-- 
2.8.1