[Intel-gfx] [PATCH] drm/i915: Use bitmask for IS_REVID checking

Tvrtko Ursulin tvrtko.ursulin at linux.intel.com
Tue May 10 13:02:21 UTC 2016


From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>

With this scheme all call sites of IS_SKL_REVID and IS_BXT_REVID
result in a maximum of one conditional jump instruction (was
three before) and overall reduction in code size.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Cc: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/i915_dma.c | 11 +++++++++++
 drivers/gpu/drm/i915/i915_drv.h | 24 +++++++++++++++++++-----
 2 files changed, 30 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 46ac1da64a09..1ae812436827 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1072,6 +1072,17 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
 	memcpy(device_info, info, sizeof(dev_priv->info));
 	device_info->device_id = dev->pdev->device;
 
+	/* For unknown revisions mask stays at zero which is correct. */
+	if (dev->pdev->revision <
+	    sizeof(device_info->revision_mask) * BITS_PER_BYTE)
+		device_info->revision_mask = BIT(dev->pdev->revision);
+
+	if (IS_SKYLAKE(dev_priv))
+		device_info->skl_rev_mask = ~0;
+
+	if (IS_BROXTON(dev_priv))
+		device_info->bxt_rev_mask = ~0;
+
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->gpu_error.lock);
 	mutex_init(&dev_priv->backlight_lock);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 26e7de415966..fbeb68e9ec96 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -757,6 +757,9 @@ struct intel_csr {
 struct intel_device_info {
 	u32 display_mmio_offset;
 	u16 device_id;
+	u8 revision_mask;
+	u8 skl_rev_mask;
+	u8 bxt_rev_mask;
 	u8 num_pipes:3;
 	u8 num_sprites[I915_MAX_PIPES];
 	u8 gen;
@@ -2519,14 +2522,23 @@ struct drm_i915_cmd_table {
 #define INTEL_DEVID(p)	(INTEL_INFO(p)->device_id)
 #define INTEL_REVID(p)	(__I915__(p)->dev->pdev->revision)
 
-#define REVID_FOREVER		0xff
+#define REVID_FOREVER		0
+
 /*
  * Return true if revision is in range [since,until] inclusive.
  *
  * Use 0 for open-ended since, and REVID_FOREVER for open-ended until.
  */
-#define IS_REVID(p, since, until) \
-	(INTEL_REVID(p) >= (since) && INTEL_REVID(p) <= (until))
+#define IS_REVID(p, mask, since, until) ({\
+	unsigned int __s = (since), __e = (until); \
+	BUILD_BUG_ON(!__builtin_constant_p(since)); \
+	BUILD_BUG_ON(!__builtin_constant_p(until)); \
+	BUILD_BUG_ON(since >= sizeof(INTEL_INFO(p)->revision_mask) * BITS_PER_BYTE); \
+	BUILD_BUG_ON(until >= sizeof(INTEL_INFO(p)->revision_mask) * BITS_PER_BYTE); \
+	if ((__e) == REVID_FOREVER) \
+		__e = BITS_PER_LONG - 1; \
+	!!(INTEL_INFO(p)->revision_mask & (mask) & GENMASK((__e), (__s))); \
+})
 
 #define IS_I830(dev)		(INTEL_DEVID(dev) == 0x3577)
 #define IS_845G(dev)		(INTEL_DEVID(dev) == 0x2562)
@@ -2605,14 +2617,16 @@ struct drm_i915_cmd_table {
 #define SKL_REVID_E0		0x4
 #define SKL_REVID_F0		0x5
 
-#define IS_SKL_REVID(p, since, until) (IS_SKYLAKE(p) && IS_REVID(p, since, until))
+#define IS_SKL_REVID(p, since, until) IS_REVID(p, INTEL_INFO(p)->skl_rev_mask, \
+				               since, until)
 
 #define BXT_REVID_A0		0x0
 #define BXT_REVID_A1		0x1
 #define BXT_REVID_B0		0x3
 #define BXT_REVID_C0		0x9
 
-#define IS_BXT_REVID(p, since, until) (IS_BROXTON(p) && IS_REVID(p, since, until))
+#define IS_BXT_REVID(p, since, until) IS_REVID(p, INTEL_INFO(p)->bxt_rev_mask, \
+				               since, until)
 
 /*
  * The genX designation typically refers to the render engine, so render
-- 
1.9.1



More information about the Intel-gfx mailing list