[Intel-gfx] [PATCH 08/13] drm/i915: Extract skl_dpll0_disable()

[Jani Nikula]

On Wed, 11 May 2016, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Make thins a bit easier to read by extracting the SKL DPLL0
> disable into separate functions. We already have the enable
> counterpart. Down the line this will also help make the cdclk
> programming on SKL, BXT, and following platforms look rather
> consistent.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>


> ---
>  drivers/gpu/drm/i915/intel_display.c | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 57ff51172065..0186f775f353 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5610,6 +5610,14 @@ skl_dpll0_enable(struct drm_i915_private *dev_priv, unsigned int required_vco)
>  		DRM_ERROR("DPLL0 not locked\n");
>  }
>  
> +static void
> +skl_dpll0_disable(struct drm_i915_private *dev_priv)
> +{
> +	I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
> +	if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
> +		DRM_ERROR("Couldn't disable DPLL0\n");
> +}
> +
>  static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
>  {
>  	int ret;
> @@ -5695,10 +5703,7 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
>  	if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
>  		DRM_ERROR("DBuf power disable timeout\n");
>  
> -	/* disable DPLL0 */
> -	I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
> -	if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
> -		DRM_ERROR("Couldn't disable DPLL0\n");
> +	skl_dpll0_disable(dev_priv);
>  }
>  
>  void skl_init_cdclk(struct drm_i915_private *dev_priv)

-- 
Jani Nikula, Intel Open Source Technology Center