[Intel-gfx] [PATCH 13/21] drm/i915: Rename skl_vco_freq to cdclk_pll.vco
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Fri May 13 20:41:32 UTC 2016
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
We'll want to store the cdclk PLL (whatever PLL that is in reality) vco
frequency somewhere on other platforms too, so let's rename the
skl_vco_freq to cdclk_pll.vco, and let's store it in kHz instead of MHz
to match most of the other clocks.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 5 +++-
drivers/gpu/drm/i915/intel_display.c | 51 ++++++++++++++++++------------------
drivers/gpu/drm/i915/intel_dp.c | 4 +--
3 files changed, 31 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 46a22732088e..8da787cd2227 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1820,7 +1820,6 @@ struct drm_i915_private {
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
unsigned int fsb_freq, mem_freq, is_ddr3;
- unsigned int skl_vco_freq;
unsigned int skl_preferred_vco_freq;
unsigned int cdclk_freq, max_cdclk_freq, atomic_cdclk_freq;
unsigned int max_dotclk_freq;
@@ -1828,6 +1827,10 @@ struct drm_i915_private {
unsigned int hpll_freq;
unsigned int czclk_freq;
+ struct {
+ unsigned int vco;
+ } cdclk_pll;
+
/**
* wq - Driver workqueue for GEM.
*
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c0dbff37e2c3..8bde3ae34869 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5276,7 +5276,7 @@ static void intel_update_max_cdclk(struct drm_device *dev)
int max_cdclk, vco;
vco = dev_priv->skl_preferred_vco_freq;
- WARN_ON(vco != 8100 && vco != 8640);
+ WARN_ON(vco != 8100000 && vco != 8640000);
/*
* Use the lower (vco 8640) cdclk values as a
@@ -5335,8 +5335,8 @@ static void intel_update_cdclk(struct drm_device *dev)
dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
- DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz, VCO: %d MHz\n",
- dev_priv->cdclk_freq, dev_priv->skl_vco_freq);
+ DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz, VCO: %d kHz\n",
+ dev_priv->cdclk_freq, dev_priv->cdclk_pll.vco);
else
DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
dev_priv->cdclk_freq);
@@ -5516,7 +5516,7 @@ void broxton_uninit_cdclk(struct drm_i915_private *dev_priv)
static int skl_calc_cdclk(int max_pixclk, int vco)
{
- if (vco == 8640) {
+ if (vco == 8640000) {
if (max_pixclk > 540000)
return 617143;
else if (max_pixclk > 432000)
@@ -5526,7 +5526,6 @@ static int skl_calc_cdclk(int max_pixclk, int vco)
else
return 308571;
} else {
- /* VCO 8100 */
if (max_pixclk > 540000)
return 675000;
else if (max_pixclk > 450000)
@@ -5545,7 +5544,7 @@ skl_dpll0_update(struct drm_i915_private *dev_priv)
val = I915_READ(LCPLL1_CTL);
if ((val & LCPLL_PLL_ENABLE) == 0) {
- dev_priv->skl_vco_freq = 0;
+ dev_priv->cdclk_pll.vco = 0;
return;
}
@@ -5563,15 +5562,15 @@ skl_dpll0_update(struct drm_i915_private *dev_priv)
case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0):
case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0):
case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0):
- dev_priv->skl_vco_freq = 8100;
+ dev_priv->cdclk_pll.vco = 8100000;
break;
case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0):
case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0):
- dev_priv->skl_vco_freq = 8640;
+ dev_priv->cdclk_pll.vco = 8640000;
break;
default:
MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
- dev_priv->skl_vco_freq = 0;
+ dev_priv->cdclk_pll.vco = 0;
break;
}
}
@@ -5592,7 +5591,7 @@ skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
int min_cdclk = skl_calc_cdclk(0, vco);
u32 val;
- WARN_ON(vco != 8100 && vco != 8640);
+ WARN_ON(vco != 8100000 && vco != 8640000);
/* select the minimum CDCLK before enabling DPLL 0 */
val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_cdclk);
@@ -5613,7 +5612,7 @@ skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
- if (vco == 8640)
+ if (vco == 8640000)
val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
SKL_DPLL0);
else
@@ -5628,7 +5627,7 @@ skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
DRM_ERROR("DPLL0 not locked\n");
- dev_priv->skl_vco_freq = vco;
+ dev_priv->cdclk_pll.vco = vco;
/* We'll want to keep using the current vco from now on. */
skl_set_preferred_cdclk_vco(dev_priv, vco);
@@ -5641,7 +5640,7 @@ skl_dpll0_disable(struct drm_i915_private *dev_priv)
if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
DRM_ERROR("Couldn't disable DPLL0\n");
- dev_priv->skl_vco_freq = 0;
+ dev_priv->cdclk_pll.vco = 0;
}
static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
@@ -5678,7 +5677,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv, int cdclk, int vco)
WARN_ON((cdclk == 24000) != (vco == 0));
- DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d MHz)\n", cdclk, vco);
+ DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", cdclk, vco);
if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
DRM_ERROR("failed to inform PCU about cdclk change\n");
@@ -5709,11 +5708,11 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv, int cdclk, int vco)
break;
}
- if (dev_priv->skl_vco_freq != 0 &&
- dev_priv->skl_vco_freq != vco)
+ if (dev_priv->cdclk_pll.vco != 0 &&
+ dev_priv->cdclk_pll.vco != vco)
skl_dpll0_disable(dev_priv);
- if (dev_priv->skl_vco_freq != vco)
+ if (dev_priv->cdclk_pll.vco != vco)
skl_dpll0_enable(dev_priv, vco);
I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(cdclk));
@@ -5740,20 +5739,20 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv)
skl_sanitize_cdclk(dev_priv);
- if (dev_priv->cdclk_freq != 0 && dev_priv->skl_vco_freq != 0) {
+ if (dev_priv->cdclk_freq > 0 && dev_priv->cdclk_pll.vco > 0) {
/*
* Use the current vco as out initial
* guess as to what the preferred vco is.
*/
if (dev_priv->skl_preferred_vco_freq == 0)
skl_set_preferred_cdclk_vco(dev_priv,
- dev_priv->skl_vco_freq);
+ dev_priv->cdclk_pll.vco);
return;
}
vco = dev_priv->skl_preferred_vco_freq;
if (vco == 0)
- vco = 8100;
+ vco = 8100000;
cdclk = skl_calc_cdclk(0, vco);
skl_set_cdclk(dev_priv, cdclk, vco);
@@ -5803,7 +5802,7 @@ sanitize:
/* force cdclk programming */
dev_priv->cdclk_freq = 0;
/* force full PLL disable + enable */
- dev_priv->skl_vco_freq = -1;
+ dev_priv->cdclk_pll.vco = -1;
}
/* Adjust CDclk dividers to allow high res or save power if possible */
@@ -6646,12 +6645,12 @@ static int skylake_get_display_clock_speed(struct drm_device *dev)
skl_dpll0_update(dev_priv);
- if (dev_priv->skl_vco_freq == 0)
+ if (dev_priv->cdclk_pll.vco == 0)
return 24000; /* 24MHz is the cd freq with NSSC ref */
cdctl = I915_READ(CDCLK_CTL);
- if (dev_priv->skl_vco_freq == 8640) {
+ if (dev_priv->cdclk_pll.vco == 8640000) {
switch (cdctl & CDCLK_FREQ_SEL_MASK) {
case CDCLK_FREQ_450_432:
return 432000;
@@ -13369,7 +13368,7 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
*/
if (dev_priv->display.modeset_calc_cdclk) {
if (!intel_state->cdclk_pll_vco)
- intel_state->cdclk_pll_vco = dev_priv->skl_vco_freq;
+ intel_state->cdclk_pll_vco = dev_priv->cdclk_pll.vco;
if (!intel_state->cdclk_pll_vco)
intel_state->cdclk_pll_vco = dev_priv->skl_preferred_vco_freq;
@@ -13378,7 +13377,7 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
return ret;
if (intel_state->dev_cdclk != dev_priv->cdclk_freq ||
- intel_state->cdclk_pll_vco != dev_priv->skl_vco_freq)
+ intel_state->cdclk_pll_vco != dev_priv->cdclk_pll.vco)
ret = intel_modeset_all_pipes(state);
if (ret < 0)
@@ -13720,7 +13719,7 @@ static int intel_atomic_commit(struct drm_device *dev,
if (dev_priv->display.modeset_commit_cdclk &&
(intel_state->dev_cdclk != dev_priv->cdclk_freq ||
- intel_state->cdclk_pll_vco != dev_priv->skl_vco_freq))
+ intel_state->cdclk_pll_vco != dev_priv->cdclk_pll.vco))
dev_priv->display.modeset_commit_cdclk(state);
intel_modeset_verify_disabled(dev);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 908c6f0f7feb..5f9a03651649 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1588,10 +1588,10 @@ found:
switch (pipe_config->port_clock / 2) {
case 108000:
case 216000:
- vco = 8640;
+ vco = 8640000;
break;
default:
- vco = 8100;
+ vco = 8100000;
break;
}
--
2.7.4
More information about the Intel-gfx
mailing list