[Intel-gfx] [PATCH v6 3/7] drm/i915/guc: add enable_guc_loading parameter
Fiedorowicz, Lukasz
lukasz.fiedorowicz at intel.com
Fri May 20 14:04:53 UTC 2016
Tested-by: Fiedorowicz, Lukasz <lukasz.fiedorowicz at intel.com>
Run similar tests as for previous version of this patch. Results are the same and logs are cleaner. I'm happy with how it works.
-----Original Message-----
From: Intel-gfx [mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf Of Tvrtko Ursulin
Sent: Friday, May 20, 2016 12:43 PM
To: Intel-gfx at lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v6 3/7] drm/i915/guc: add enable_guc_loading parameter
From: Dave Gordon <david.s.gordon at intel.com>
Split the function of "enable_guc_submission" into two separate options. The new one ("enable_guc_loading") controls only the *fetching and loading* of the GuC firmware image. The existing one is redefined to control only the *use* of the GuC for batch submission once the firmware is loaded.
In addition, the degree of control has been refined from a simple bool to an integer key, allowing several options:
-1 (default) whatever the platform default is
0 DISABLE don't load/use the GuC
1 BEST EFFORT try to load/use the GuC, fallback if not available
2 REQUIRE must load/use the GuC, else leave the GPU wedged
The new platform default (as coded here) will be to attempt to load the GuC iff the device has a GuC that requires firmware, but not yet to use it for submission. A later patch will change to enable it if appropriate.
v4:
Changed some error-message levels, mostly ERROR->INFO, per
review comments by Tvrtko Ursulin.
v5:
Dropped one more error message, disabled GuC submission on
hypothetical firmware-free devices [Tvrtko Ursulin].
v6:
Logging tidy by Tvrtko Ursulin:
* Do not log falling back to execlists when wedging the GPU.
* Do not log fw load errors when load was disabled by user.
* Pass down some error code from fw load for log message to
make more sense.
Signed-off-by: Dave Gordon <david.s.gordon at intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com> (v5)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
---
drivers/gpu/drm/i915/i915_gem.c | 5 +-
drivers/gpu/drm/i915/i915_guc_submission.c | 4 +-
drivers/gpu/drm/i915/i915_params.c | 14 +++-
drivers/gpu/drm/i915/i915_params.h | 3 +-
drivers/gpu/drm/i915/intel_guc_loader.c | 123 +++++++++++++++++------------
5 files changed, 89 insertions(+), 60 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 88dce5482f2f..1a3a07eca0d0 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4868,11 +4868,8 @@ i915_gem_init_hw(struct drm_device *dev)
/* We can't enable contexts until all firmware is loaded */
if (HAS_GUC(dev)) {
ret = intel_guc_setup(dev);
- if (ret) {
- DRM_ERROR("Failed to initialize GuC, error %d\n", ret);
- ret = -EIO;
+ if (ret)
goto out;
- }
}
/*
diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index 169242a8adff..916cd6778cf3 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -969,7 +969,7 @@ int intel_guc_suspend(struct drm_device *dev)
struct intel_context *ctx;
u32 data[3];
- if (!i915.enable_guc_submission)
+ if (guc->guc_fw.guc_fw_load_status != GUC_FIRMWARE_SUCCESS)
return 0;
ctx = dev_priv->kernel_context;
@@ -995,7 +995,7 @@ int intel_guc_resume(struct drm_device *dev)
struct intel_context *ctx;
u32 data[3];
- if (!i915.enable_guc_submission)
+ if (guc->guc_fw.guc_fw_load_status != GUC_FIRMWARE_SUCCESS)
return 0;
ctx = dev_priv->kernel_context;
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index cd74fb8e9387..21a323c01cdb 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -53,7 +53,8 @@ struct i915_params i915 __read_mostly = {
.verbose_state_checks = 1,
.nuclear_pageflip = 0,
.edp_vswing = 0,
- .enable_guc_submission = false,
+ .enable_guc_loading = -1,
+ .enable_guc_submission = 0,
.guc_log_level = -1,
.enable_dp_mst = true,
.inject_load_failure = 0,
@@ -193,8 +194,15 @@ MODULE_PARM_DESC(edp_vswing,
"(0=use value from vbt [default], 1=low power swing(200mV),"
"2=default swing(400mV))");
-module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, bool, 0400); -MODULE_PARM_DESC(enable_guc_submission, "Enable GuC submission (default:false)");
+module_param_named_unsafe(enable_guc_loading, i915.enable_guc_loading,
+int, 0400); MODULE_PARM_DESC(enable_guc_loading,
+ "Enable GuC firmware loading "
+ "(-1=auto [default], 0=never, 1=if available, 2=required)");
+
+module_param_named_unsafe(enable_guc_submission,
+i915.enable_guc_submission, int, 0400); MODULE_PARM_DESC(enable_guc_submission,
+ "Enable GuC submission "
+ "(-1=auto, 0=never [default], 1=if available, 2=required)");
module_param_named(guc_log_level, i915.guc_log_level, int, 0400); MODULE_PARM_DESC(guc_log_level, diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
index dd0d0bbcc05b..658ce7379671 100644
--- a/drivers/gpu/drm/i915/i915_params.h
+++ b/drivers/gpu/drm/i915/i915_params.h
@@ -45,6 +45,8 @@ struct i915_params {
int enable_ips;
int invert_brightness;
int enable_cmd_parser;
+ int enable_guc_loading;
+ int enable_guc_submission;
int guc_log_level;
int mmio_debug;
int edp_vswing;
@@ -56,7 +58,6 @@ struct i915_params {
bool load_detect_test;
bool reset;
bool disable_display;
- bool enable_guc_submission;
bool verbose_state_checks;
bool nuclear_pageflip;
bool enable_dp_mst;
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 30ec8208dbbc..29273e5fee22 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -402,50 +402,42 @@ int intel_guc_setup(struct drm_device *dev) {
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
- int retries, err = 0;
+ const char *fw_path = guc_fw->guc_fw_path;
+ int retries, ret, err;
- if (!i915.enable_guc_submission)
- return 0;
-
- DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
+ DRM_DEBUG_DRIVER("GuC fw status: path %s, fetch %s, load %s\n",
+ fw_path,
intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
- direct_interrupts_to_host(dev_priv);
-
- if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_NONE)
- return 0;
-
- if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_SUCCESS &&
- guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL)
- return -ENOEXEC;
-
- guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING;
-
- DRM_DEBUG_DRIVER("GuC fw fetch status %s\n",
- intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
+ /* Loading forbidden, or no firmware to load? */
+ if (!i915.enable_guc_loading) {
+ err = 0;
+ goto fail;
+ } else if (fw_path == NULL || *fw_path == '\0') {
+ if (*fw_path == '\0')
+ DRM_INFO("No GuC firmware known for this platform\n");
+ err = -ENODEV;
+ goto fail;
+ }
- switch (guc_fw->guc_fw_fetch_status) {
- case GUC_FIRMWARE_FAIL:
- /* something went wrong :( */
+ /* Fetch failed, or already fetched but failed to load? */
+ if (guc_fw->guc_fw_fetch_status != GUC_FIRMWARE_SUCCESS) {
err = -EIO;
goto fail;
-
- case GUC_FIRMWARE_NONE:
- case GUC_FIRMWARE_PENDING:
- default:
- /* "can't happen" */
- WARN_ONCE(1, "GuC fw %s invalid guc_fw_fetch_status %s [%d]\n",
- guc_fw->guc_fw_path,
- intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
- guc_fw->guc_fw_fetch_status);
- err = -ENXIO;
+ } else if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL) {
+ err = -ENOEXEC;
goto fail;
-
- case GUC_FIRMWARE_SUCCESS:
- break;
}
+ direct_interrupts_to_host(dev_priv);
+
+ guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING;
+
+ DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
+ intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
+ intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
+
err = i915_guc_submission_init(dev);
if (err)
goto fail;
@@ -463,7 +455,7 @@ int intel_guc_setup(struct drm_device *dev)
*/
err = i915_reset_guc(dev_priv);
if (err) {
- DRM_ERROR("GuC reset failed, err %d\n", err);
+ DRM_ERROR("GuC reset failed: %d\n", err);
goto fail;
}
@@ -474,8 +466,8 @@ int intel_guc_setup(struct drm_device *dev)
if (--retries == 0)
goto fail;
- DRM_INFO("GuC fw load failed, err %d; will reset and "
- "retry %d more time(s)\n", err, retries);
+ DRM_INFO("GuC fw load failed: %d; will reset and "
+ "retry %d more time(s)\n", err, retries);
}
guc_fw->guc_fw_load_status = GUC_FIRMWARE_SUCCESS; @@ -497,7 +489,6 @@ int intel_guc_setup(struct drm_device *dev)
return 0;
fail:
- DRM_ERROR("GuC firmware load failed, err %d\n", err);
if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_PENDING)
guc_fw->guc_fw_load_status = GUC_FIRMWARE_FAIL;
@@ -505,7 +496,41 @@ fail:
i915_guc_submission_disable(dev);
i915_guc_submission_fini(dev);
- return err;
+ /*
+ * We've failed to load the firmware :(
+ *
+ * Decide whether to disable GuC submission and fall back to
+ * execlist mode, and whether to hide the error by returning
+ * zero or to return -EIO, which the caller will treat as a
+ * nonfatal error (i.e. it doesn't prevent driver load, but
+ * marks the GPU as wedged until reset).
+ */
+ if (i915.enable_guc_loading > 1) {
+ ret = -EIO;
+ } else if (i915.enable_guc_submission > 1) {
+ ret = -EIO;
+ } else {
+ ret = 0;
+ }
+
+ if (err == 0)
+ DRM_INFO("GuC firmware load skipped\n");
+ else if (ret == -EIO)
+ DRM_ERROR("GuC firmware load failed: %d\n", err);
+ else
+ DRM_INFO("GuC firmware load failed: %d\n", err);
+
+ if (i915.enable_guc_submission) {
+ if (fw_path == NULL)
+ DRM_INFO("GuC submission without firmware not supported\n");
+ if (ret == 0)
+ DRM_INFO("Falling back to execlist mode\n");
+ else
+ DRM_ERROR("GuC init failed: %d\n", ret);
+ }
+ i915.enable_guc_submission = 0;
+
+ return ret;
}
static void guc_fw_fetch(struct drm_device *dev, struct intel_guc_fw *guc_fw) @@ -644,8 +669,11 @@ void intel_guc_init(struct drm_device *dev)
struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
const char *fw_path;
- if (!HAS_GUC_SCHED(dev))
- i915.enable_guc_submission = false;
+ /* A negative value means "use platform default" */
+ if (i915.enable_guc_loading < 0)
+ i915.enable_guc_loading = HAS_GUC_UCODE(dev);
+ if (i915.enable_guc_submission < 0)
+ i915.enable_guc_submission = HAS_GUC_SCHED(dev);
if (!HAS_GUC_UCODE(dev)) {
fw_path = NULL;
@@ -658,26 +686,21 @@ void intel_guc_init(struct drm_device *dev)
guc_fw->guc_fw_major_wanted = 8;
guc_fw->guc_fw_minor_wanted = 7;
} else {
- i915.enable_guc_submission = false;
fw_path = ""; /* unknown device */
}
- if (!i915.enable_guc_submission)
- return;
-
guc_fw->guc_dev = dev;
guc_fw->guc_fw_path = fw_path;
guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
guc_fw->guc_fw_load_status = GUC_FIRMWARE_NONE;
+ /* Early (and silent) return if GuC loading is disabled */
+ if (!i915.enable_guc_loading)
+ return;
if (fw_path == NULL)
return;
-
- if (*fw_path == '\0') {
- DRM_ERROR("No GuC firmware known for this platform\n");
- guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
+ if (*fw_path == '\0')
return;
- }
guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_PENDING;
DRM_DEBUG_DRIVER("GuC firmware pending, path %s\n", fw_path);
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx at lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list