[Intel-gfx] [PATCH] drm/i915/ilk: Disable SSC for DPLLs if we're not using it
Ville Syrjälä
ville.syrjala at linux.intel.com
Mon May 23 19:16:35 UTC 2016
On Mon, May 23, 2016 at 02:56:54PM -0400, Lyude wrote:
> Thanks to Ville Syrjälä for pointing me towards the cause of this issue.
>
> Unfortunately one of the sideaffects of having the refclk for a DPLL
> set to SSC is that as long as it's set to SSC, the GPU will prevent us
> from powering down any of the pipes or transcoders using it. A couple of
> BIOSes, despite the fact they don't actually need it, enable SSC both in
> PCH_DREF_CONTROL and on the DPLL configurations. This causes issues on
> the first modeset, since we don't expect SSC to be left on and as a
> result, can't successfully power down the pipes or the transcoders using
> it. Here's an example from this Dell OptiPlex 990:
>
> [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
> [drm:intel_modeset_init] 2 display pipes available.
> [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
> [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
> [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
> vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [drm:intel_crt_reset] crt adpa set to 0xf40000
> [drm:intel_dp_init_connector] Adding DP connector on port C
> [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
> [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
> [drm:ironlake_init_pch_refclk] Disabling SSC entirely
> … later we try committing the first modeset …
> [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A
> [drm:intel_dump_pipe_config] cpu_transcoder: A
> …
> [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07
> [drm:intel_dump_pipe_config] planes on this crtc
> [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
> [drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258
> [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600
> [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
> [drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A
> [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
> [drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A
> [drm:intel_disable_pipe] disabling pipe A
> ------------[ cut here ]------------
> WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915]
> pipe_off wait timed out
> …
> ---[ end trace 94fc8aa03ae139e8 ]---
> [drm:intel_dp_link_down]
> [drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A
>
> Later modesets succeed since they reset the DPLL's configuration anyway,
> but this is enough to get stuck with a big fat warning in dmesg.
>
> Normally we'd need to add some sort of ref counting mechanism to the
> CRTCs so we avoid accidentally trying to shut off a shared resource, but
> since ignore what the BIOS does anyway and we shut off the refclks
> before any modesets, this workaround should suffice for now.
>
> Cc: stable at vger.kernel.org
> Signed-off-by: Lyude <cpaul at redhat.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index d500e6f..3fb6025 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -8230,7 +8230,8 @@ static void ironlake_init_pch_refclk(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_encoder *encoder;
> - u32 val, final;
> + int i;
> + u32 val, temp, final;
> bool has_lvds = false;
> bool has_cpu_edp = false;
> bool has_panel = false;
> @@ -8369,6 +8370,22 @@ static void ironlake_init_pch_refclk(struct drm_device *dev)
> I915_WRITE(PCH_DREF_CONTROL, val);
> POSTING_READ(PCH_DREF_CONTROL);
> udelay(200);
> +
> + /* Unset SSC as the refclk for all of the DPLLs */
> + for (i = 0; i < dev_priv->num_shared_dpll; i++) {
> + temp = I915_READ(PCH_DPLL(i));
> +
> + if (!(temp & PLLB_REF_INPUT_SPREADSPECTRUMIN))
should be something like
(temp & (DPLL_VCO_ENABLE | PLL_REF_INPUT_MASK)) != (DPLL_VCO_ENABLE | PLL_REF_INPUT_SPREADSPECTRUMIN)
> + continue;
> +
> + DRM_DEBUG_KMS("Disabling SSC refclk for %s\n",
> + dev_priv->shared_dplls[i].name);
> +
> + /* Change refclk to DREFCLK */
> + temp &= ~PLL_REF_INPUT_MASK;
I doubt that's safe. We need to just leave the SSC source enabled
instead if any DPLL depends on it. I think something along these
lines should be sufficient:
- final &= ~DREF_SSC_SOURCE_MASK;
final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
- final &= ~DREF_SSC1_ENABLE;
+
+ /* blah */
+ if (!dpll_uses_ssc()) {
+ final &= ~DREF_SSC_SOURCE_MASK;
+ final &= ~DREF_SSC1_ENABLE;
+ }
> +
> + I915_WRITE(PCH_DPLL(i), temp);
> + }
> }
>
> BUG_ON(val != final);
> --
> 2.5.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list