[Intel-gfx] [PATCH v2 1/2] drm/i915/gen9: Assume CDCLK PLL is off if it's not locked

[Imre Deak]

If the CDCLK PLL isn't locked or incorrectly configured we can just
assume that it's off resulting in fully re-initializing both CDCLK PLL
and CDCLK dividers. This way the CDCLK PLL sanitization added in the
following patch can be done on BXT the same way as it's done on SKL.

v2: (Ville)
- Remove the remaining PLL specific checks from skl_sanitize_cdclk() and
  depend instead on the corresponding check in skl_dpll0_update().
- Use vco == 0 instead of the corresponding boolean check in
  skl_sanitize_cdclk().

CC: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 39 +++++++++++++++---------------------
 1 file changed, 16 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c1e666b..47b2466 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5461,21 +5461,22 @@ skl_dpll0_update(struct drm_i915_private *dev_priv)
 	u32 val;
 
 	dev_priv->cdclk_pll.ref = 24000;
+	dev_priv->cdclk_pll.vco = 0;
 
 	val = I915_READ(LCPLL1_CTL);
-	if ((val & LCPLL_PLL_ENABLE) == 0) {
-		dev_priv->cdclk_pll.vco = 0;
+	if ((val & LCPLL_PLL_ENABLE) == 0)
 		return;
-	}
 
-	WARN_ON((val & LCPLL_PLL_LOCK) == 0);
+	if (WARN_ON((val & LCPLL_PLL_LOCK) == 0))
+		return;
 
 	val = I915_READ(DPLL_CTRL1);
 
-	WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
-			DPLL_CTRL1_SSC(SKL_DPLL0) |
-			DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
-		DPLL_CTRL1_OVERRIDE(SKL_DPLL0));
+	if (WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
+			    DPLL_CTRL1_SSC(SKL_DPLL0) |
+			    DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
+		    DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
+		return;
 
 	switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
 	case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0):
@@ -5490,7 +5491,6 @@ skl_dpll0_update(struct drm_i915_private *dev_priv)
 		break;
 	default:
 		MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
-		dev_priv->cdclk_pll.vco = 0;
 		break;
 	}
 }
@@ -5690,19 +5690,12 @@ static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
 	if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
 		goto sanitize;
 
+	intel_update_cdclk(dev_priv->dev);
 	/* Is PLL enabled and locked ? */
-	if ((I915_READ(LCPLL1_CTL) & (LCPLL_PLL_ENABLE | LCPLL_PLL_LOCK)) !=
-	    (LCPLL_PLL_ENABLE | LCPLL_PLL_LOCK))
+	if (dev_priv->cdclk_pll.vco == 0 ||
+	    dev_priv->cdclk_freq == dev_priv->cdclk_pll.ref)
 		goto sanitize;
 
-	if ((I915_READ(DPLL_CTRL1) & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
-				      DPLL_CTRL1_SSC(SKL_DPLL0) |
-				      DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
-	    DPLL_CTRL1_OVERRIDE(SKL_DPLL0))
-		goto sanitize;
-
-	intel_update_cdclk(dev_priv->dev);
-
 	/* DPLL okay; verify the cdclock
 	 *
 	 * Noticed in some instances that the freq selection is correct but
@@ -6608,14 +6601,14 @@ static void bxt_de_pll_update(struct drm_i915_private *dev_priv)
 	u32 val;
 
 	dev_priv->cdclk_pll.ref = 19200;
+	dev_priv->cdclk_pll.vco = 0;
 
 	val = I915_READ(BXT_DE_PLL_ENABLE);
-	if ((val & BXT_DE_PLL_PLL_ENABLE) == 0) {
-		dev_priv->cdclk_pll.vco = 0;
+	if ((val & BXT_DE_PLL_PLL_ENABLE) == 0)
 		return;
-	}
 
-	WARN_ON((val & BXT_DE_PLL_LOCK) == 0);
+	if (WARN_ON((val & BXT_DE_PLL_LOCK) == 0))
+		return;
 
 	val = I915_READ(BXT_DE_PLL_CTL);
 	dev_priv->cdclk_pll.vco = (val & BXT_DE_PLL_RATIO_MASK) *
-- 
2.5.0