[Intel-gfx] [PATCH 4/5] Add support for forcing 6 bpc on DP pipes.

Manasi Navare manasi.d.navare at intel.com
Thu May 26 00:42:11 UTC 2016


On Tue, May 24, 2016 at 08:45:45AM +0300, Ander Conselvan De Oliveira wrote:
> On Mon, 2016-05-23 at 10:42 -0700, Jim Bride wrote:
> > On Mon, May 23, 2016 at 11:22:17AM +0300, Ander Conselvan De Oliveira wrote:
> > > 
> > > On Fri, 2016-04-29 at 18:28 -0700, Manasi Navare wrote:
> > > > 
> > > > From: Jim Bride <jim.bride at linux.intel.com>
> > > > 
> > > > For DP compliance we need to be able to control the output color
> > > > type for the pipe associated with the DP port. To do this we rely
> > > > on the intel_dp_test_force_bpc debugfs file and the associated value
> > > > stored in struct intel_dp. If the debugfs file has a non-zero value
> > > > and we're on a display port connector, then we use the value from
> > > > debugfs to calculate the bpp for the pipe.  For cases where we are
> > > > not on DP or there has not been an overridden value then we behave
> > > > as normal.
> > > > 
> > > > Signed-off-by: Jim Bride <jim.bride at linux.intel.com>
> > > > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > > > ---
> > > >  drivers/gpu/drm/i915/intel_display.c | 32 ++++++++++++++++++++++++++++++-
> > > > -
> > > >  drivers/gpu/drm/i915/intel_drv.h     |  1 +
> > > >  2 files changed, 31 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > > > b/drivers/gpu/drm/i915/intel_display.c
> > > > index 5ffccf6..1618d36 100644
> > > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > > @@ -12102,11 +12102,39 @@ compute_baseline_pipe_bpp(struct intel_crtc
> > > > *crtc,
> > > >  
> > > >  	/* Clamp display bpp to EDID value */
> > > >  	for_each_connector_in_state(state, connector, connector_state, i)
> > > > {
> > > > +		int type = 0;
> > > > +
> > > > +		if (connector_state->best_encoder) {
> > > > +			struct intel_encoder *ienc;
> > > > +
> > > > +			ienc = to_intel_encoder(connector_state-
> > > > > 
> > > > > best_encoder);
> > > > +			type = ienc->type;
> > > > +		}
> > > > +
> > > >  		if (connector_state->crtc != &crtc->base)
> > > >  			continue;
> > > >  
> > > > -		connected_sink_compute_bpp(to_intel_connector(connector),
> > > > -					   pipe_config);
> > > > +		/* For DP compliance we need to ensure that we can
> > > > override
> > > > +		 * the computed bpp for the pipe.
> > > > +		 */
> > > > +		if (type == INTEL_OUTPUT_DISPLAYPORT) {
> > > > +			struct intel_dp *intel_dp =
> > > > +				enc_to_intel_dp(connector_state-
> > > > > 
> > > > > best_encoder);
> > > > +
> > > > +			if (intel_dp &&
> > > > +			    (intel_dp->compliance_force_bpc != 0)) {
> > > > +				pipe_config->pipe_bpp =
> > > > +					intel_dp->compliance_force_bpc*3;
> > > > +				DRM_DEBUG_KMS("JMB Setting pipe_bpp to
> > > > %d\n",
> > > > +					      pipe_config->pipe_bpp);
> > > > +			} else {
> > > > +				connected_sink_compute_bpp(to_intel_conne
> > > > ctor
> > > > (connector),
> > > > +						   pipe_config);
> > > This kind of thing should be done in the encoder compute_config hook.
> > Even though it's really not specific to an individual encoder configuration?
> > This seems to be the central place where we're ensuring that we have a sane
> > value for bpp relative to the display, and thus a good place to set this
> > override to make compliance happy (which needs a specific bpc value for some
> > test cases rather than one that is deemed sane relative to the sink's
> > capabilities.
> 
> Well, this code path is only reached when the DisplayPort associated with a
> given encoder is in the middle of compliance testing. I'd say that's very
> encoder specific.
> 
> The bpp computation happens in two phases. Here a baseline is computed,
> considering what is generally supported by the hardware. The encoders are
> allowed to override that value. You can look at HDMI for an example: it may
> require a bpp override since HDMI doesn't supports 10 bpc, only 8 or 12. You can
>  find similar code also in LVDS and even DP.
> 
> Unfortunately, there is very little documentation of what the hooks are supposed
> to do. But for the question at hand, yes, it should really be in
> intel_dp_compute_config().
> 
> Ander

Inside of intel_dp_compute_config(), do we need to change the pipe_config->pipe_bpp
to use intel_dp->compliance_force_bpc in case of CTS or should we just modify the local
bpp value to use the force_bpc?

Manasi
> 
> > 
> > > 
> > > 
> > > > 
> > > > +			}
> > > > +		} else {
> > > > +			connected_sink_compute_bpp(to_intel_connector(con
> > > > nect
> > > > or),
> > > > +						   pipe_config);
> > > > +		}
> > > >  	}
> > > >  
> > > >  	return bpp;
> > > > diff --git a/drivers/gpu/drm/i915/intel_drv.h
> > > > b/drivers/gpu/drm/i915/intel_drv.h
> > > > index e23eed7..10eaff8 100644
> > > > --- a/drivers/gpu/drm/i915/intel_drv.h
> > > > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > > > @@ -865,6 +865,7 @@ struct intel_dp {
> > > >  	unsigned long compliance_test_type;
> > > >  	unsigned long compliance_test_data;
> > > >  	bool compliance_test_active;
> > > > +	unsigned long compliance_force_bpc; /* 0 for default or bpc to
> > > > use */
> > > There's no code for setting compliance_test_active anywhere. The commit
> > > message
> > > mentions debugfs, but I didn't see anything related in the patch. 
> > It appears that Manasi forgot to include one of the patches I had sent her.
> > The debugfs support code was in a separate patch.
> > 
> > Jim
> > 
> > > 
> > > 
> > > 
> > > Ander
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx


More information about the Intel-gfx mailing list