[Intel-gfx] [PATCH] drm/i915: Reject modeset if the dotclock is too high

Ville Syrjälä ville.syrjala at linux.intel.com
Fri May 27 11:54:29 UTC 2016


On Wed, May 25, 2016 at 11:15:35AM +0300, Jani Nikula wrote:
> On Tue, 24 May 2016, ville.syrjala at linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > Reject the modeset if the requested dotclock exceeds the maximum allowed
> > by the hardware. So far we've only checked this on gen2/3 while also
> > handling the double wide vs. single wide pipe selection. Extend the
> > check to all platforms since we have the max dotclock correctly
> > populated now across the board.
> >
> > Testcase: igt/kms_invalid_dotclock
> > Cc: Mika Kahola <mika.kahola at intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> Seems good. Maybe we have bugs open about this?

I hope all of those got sorted by the SKL cdclk programming patches. But
I should go through the list anyways...

> Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> 
> > ---
> >  drivers/gpu/drm/i915/intel_display.c | 18 +++++++++---------
> >  1 file changed, 9 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 1e5138497e6a..adb489508f25 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -6510,10 +6510,10 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
> >  	struct drm_device *dev = crtc->base.dev;
> >  	struct drm_i915_private *dev_priv = dev->dev_private;
> >  	const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
> > +	int clock_limit = dev_priv->max_dotclk_freq;
> >  
> > -	/* FIXME should check pixel clock limits on all platforms */
> >  	if (INTEL_INFO(dev)->gen < 4) {
> > -		int clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
> > +		clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
> >  
> >  		/*
> >  		 * Enable double wide mode when the dot clock
> > @@ -6521,16 +6521,16 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
> >  		 */
> >  		if (intel_crtc_supports_double_wide(crtc) &&
> >  		    adjusted_mode->crtc_clock > clock_limit) {
> > -			clock_limit *= 2;
> > +			clock_limit = dev_priv->max_dotclk_freq;
> >  			pipe_config->double_wide = true;
> >  		}
> > +	}
> >  
> > -		if (adjusted_mode->crtc_clock > clock_limit) {
> > -			DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
> > -				      adjusted_mode->crtc_clock, clock_limit,
> > -				      yesno(pipe_config->double_wide));
> > -			return -EINVAL;
> > -		}
> > +	if (adjusted_mode->crtc_clock > clock_limit) {
> > +		DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
> > +			      adjusted_mode->crtc_clock, clock_limit,
> > +			      yesno(pipe_config->double_wide));
> > +		return -EINVAL;
> >  	}
> >  
> >  	/*
> 
> -- 
> Jani Nikula, Intel Open Source Technology Center

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list