[Intel-gfx] [PATCH 4/5] drm/i915: Parse VBT data for lspcon

[Ville Syrjälä]

On Tue, May 31, 2016 at 02:55:45PM +0530, Shashank Sharma wrote:
> Many GEN9 boards come with on-board lspcon cards.
> Fot these boards, VBT configuration should properly point out
> if a particular port contains lspcon device, so that driver can
> initialize it properly.
> 
> This patch adds a utility function, which checks the VBT flag
> for lspcon bit, and tells us if a port is configured to have a
> lspcon device or not.
> 
> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_drv.h   |  3 +++
>  drivers/gpu/drm/i915/intel_bios.c | 44 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 47 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index e4c8e34..32ddde5 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3622,6 +3622,9 @@ bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum por
>  bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port);
>  bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
>  				     enum port port);
> +bool intel_bios_is_lspcon_present(struct drm_i915_private *dev_priv,
> +				enum port port);
> +
>  
>  /* intel_opregion.c */
>  #ifdef CONFIG_ACPI
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 624e755..501b57f 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -1715,3 +1715,47 @@ intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
>  
>  	return false;
>  }
> +
> +/**
> + * intel_bios_is_lspcon_present - if LSPCON is attached on %port
> + * @dev_priv:	i915 device instance
> + * @port:	port to check
> + *
> + * Return true if LSPCON is present on this port
> + */
> +bool
> +intel_bios_is_lspcon_present(struct drm_i915_private *dev_priv,
> +				enum port port)
> +{
> +	int i;
> +
> +	if (WARN_ON_ONCE(!IS_GEN9(dev_priv)))
> +		return false;
> +
> +	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
> +		if (!dev_priv->vbt.child_dev[i].common.lspcon)
> +			continue;
> +
> +		switch (dev_priv->vbt.child_dev[i].common.dvo_port) {
> +		case DVO_PORT_DPA:
> +		case DVO_PORT_HDMIA:
> +			if (port == PORT_A)
> +				return true;
> +			break;
> +		case DVO_PORT_DPB:
> +		case DVO_PORT_HDMIB:
> +			if (port == PORT_B)
> +				return true;
> +			break;
> +		case DVO_PORT_DPC:
> +		case DVO_PORT_HDMIC:
> +			if (port == PORT_C)
> +				return true;
> +			break;

With just A/B/C this looks like it's expecting only BXT, but you're
checking for gen9 here. What's the deal?

> +		default:
> +			break;
> +		}
> +	}
> +
> +	return false;
> +}
> -- 
> 1.9.1

-- 
Ville Syrjälä
Intel OTC