[Intel-gfx] [PATCH v4 1/2] drm/i915/dp: Enable DP audio stall fix for gen9 platforms

[Pandiyan, Dhinakaran]

On Fri, 2016-11-04 at 17:48 +0200, Jani Nikula wrote:
> On Wed, 26 Oct 2016, Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com> wrote:
> > Enabling DP audio stall fix is necessary to play audio over DP HBR2. So,
> > let's set this bit right before enabling the audio codec. Playing audio
> > without setting this bit results in pipe FIFO underruns.
> >
> > This workaround is applicable only for audio sample rates up to 96kHz. For
> > frequencies above 96kHz, this is insufficient and cdclk should be increased
> > to at least 432 MHz, just like BDW. Since, the audio driver does not
> > support sample rates > 48 kHz, we are safe with this fix for now.
> 
> Do we still need this patch now that these two have been pushed?
> 
> b30ce9e0552a drm/i915/dp: BDW cdclk fix for DP audio
> 9c7540241885 drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
> 
> BR,
> Jani.
> 
> 
> 

No, we are good afaik. This patch would have helped us to make use of a
lower cdclk (337.5 MHz), with constraints on audio bit rate. Operating
at 432 MHz, like we do now, rules out the need for this patch.

-DK

> >
> > v2: Inlined the code change within hsw_audio_codec_enable() (Jani)
> >     Fixed the port clock typo
> >     Added TODO comment
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_reg.h    |  5 +++++
> >  drivers/gpu/drm/i915/intel_audio.c | 30 +++++++++++++++++++++++++++++-
> >  2 files changed, 34 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 00efaa1..76dac48 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -6236,6 +6236,11 @@ enum {
> >  #define SLICE_ECO_CHICKEN0			_MMIO(0x7308)
> >  #define   PIXEL_MASK_CAMMING_DISABLE		(1 << 14)
> >  
> > +#define _CHICKEN_TRANS_A	0x420C0
> > +#define _CHICKEN_TRANS_B	0x420C4
> > +#define CHICKEN_TRANS(tran) _MMIO_TRANS(tran, _CHICKEN_TRANS_A, _CHICKEN_TRANS_B)
> > +#define SPARE_13	(1<<13)
> > +
> >  /* WaCatErrorRejectionIssue */
> >  #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG		_MMIO(0x9030)
> >  #define  GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB	(1<<11)
> > diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> > index 7093cfb..894f11e 100644
> > --- a/drivers/gpu/drm/i915/intel_audio.c
> > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > @@ -283,6 +283,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
> >  {
> >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> >  	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> > +	struct intel_crtc_state *crtc_config =  intel_crtc->config;
> > +	enum transcoder cpu_transcoder = crtc_config->cpu_transcoder;
> >  	enum pipe pipe = intel_crtc->pipe;
> >  	uint32_t tmp;
> >  
> > @@ -290,13 +292,21 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
> >  
> >  	mutex_lock(&dev_priv->av_mutex);
> >  
> > +	/*Disable DP audio stall fix for HBR2*/
> > +	if (IS_GEN9(dev_priv) && intel_crtc_has_dp_encoder(crtc_config) &&
> > +	    crtc_config->port_clock >= 540000) {
> > +		tmp = I915_READ(CHICKEN_TRANS(cpu_transcoder));
> > +		tmp &= ~SPARE_13;
> > +		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), tmp);
> > +	}
> > +
> >  	/* Disable timestamps */
> >  	tmp = I915_READ(HSW_AUD_CFG(pipe));
> >  	tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
> >  	tmp |= AUD_CONFIG_N_PROG_ENABLE;
> >  	tmp &= ~AUD_CONFIG_UPPER_N_MASK;
> >  	tmp &= ~AUD_CONFIG_LOWER_N_MASK;
> > -	if (intel_crtc_has_dp_encoder(intel_crtc->config))
> > +	if (intel_crtc_has_dp_encoder(crtc_config))
> >  		tmp |= AUD_CONFIG_N_VALUE_INDEX;
> >  	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> >  
> > @@ -315,6 +325,8 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
> >  {
> >  	struct drm_i915_private *dev_priv = to_i915(connector->dev);
> >  	struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
> > +	struct intel_crtc_state *crtc_config =  intel_crtc->config;
> > +	enum transcoder cpu_transcoder = crtc_config->cpu_transcoder;
> >  	enum pipe pipe = intel_crtc->pipe;
> >  	enum port port = intel_encoder->port;
> >  	const uint8_t *eld = connector->eld;
> > @@ -326,6 +338,22 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
> >  
> >  	mutex_lock(&dev_priv->av_mutex);
> >  
> > +	/* Enable DP audio stall fix for HBR2
> > +	 *
> > +	 * TODO: This workaround is applicable only for audio sample rates up
> > +	 * to 96kHz. For frequencies above 96kHz, this is insufficient and
> > +	 * cdclk should be increased to at least 432 MHz, just like BDW. Since,
> > +	 * the audio driver does not support sample rates > 48 kHz, we are safe
> > +	 * with this fix for now.
> > +	 */
> > +
> > +	if (IS_GEN9(dev_priv) && intel_crtc_has_dp_encoder(crtc_config) &&
> > +	    crtc_config->port_clock >= 540000) {
> > +		tmp = I915_READ(CHICKEN_TRANS(cpu_transcoder));
> > +		tmp |= SPARE_13;
> > +		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), tmp);
> > +	}
> > +
> >  	/* Enable audio presence detect, invalidate ELD */
> >  	tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> >  	tmp |= AUDIO_OUTPUT_ENABLE(pipe);
>