[Intel-gfx] [PATCH v4] drm/i915: Limit Valleyview and earlier to only using mappable scanout

[Chris Wilson]

Valleyview appears tobe limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, thought testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)

v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.

v3: Update change log to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well

Reported-by: Luis Botello <luis.botello.ortega at intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Akash Goel <akash.goel at intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: <drm-intel-fixes at lists.freedesktop.org> # v4.9-rc1+
---
 drivers/gpu/drm/i915/i915_gem.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6a2005683f6d..4116809f3ed2 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3673,8 +3673,23 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
 	if (view->type == I915_GGTT_VIEW_NORMAL)
 		vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment,
 					       PIN_MAPPABLE | PIN_NONBLOCK);
-	if (IS_ERR(vma))
-		vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, 0);
+	if (IS_ERR(vma)) {
+		struct drm_i915_private *i915 = to_i915(obj->base.dev);
+		unsigned int flags;
+
+		/* Valleyview is definitely limited to scanning out the first
+		 * 512MiB respectively. Lets presume this behaviour was
+		 * inherited from the g4x display engine and that all earlier
+		 * gen are similarly limited. Testing suggests that it is a
+		 * little more complicated than this. For example, Cherryview
+		 * appears quite happy to scanout from anywhere within its
+		 * global aperture.
+		 */
+		flags = 0;
+		if (HAS_GMCH_DISPLAY(i915))
+			flags = PIN_MAPPABLE;
+		vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, flags);
+	}
 	if (IS_ERR(vma))
 		goto err_unpin_display;
 
-- 
2.10.2