[Intel-gfx] [PATCH 8/8] drm/i915/get_params: Add HuC status to getparams
Anusha Srivatsa
anusha.srivatsa at intel.com
Wed Nov 9 18:51:37 UTC 2016
From: Peter Antoine <peter.antoine at intel.com>
This patch will allow for getparams to return the status of the HuC.
As the HuC has to be validated by the GuC this patch uses the validated
status to show when the HuC is loaded and ready for use. You cannot use
the loaded status as with the GuC as the HuC is verified after it is
loaded and is not usable until it is verified.
v2: removed the forewakes as the registers are already force-woken.
(T.Ursulin)
v4: rebased.
v5: rebased.
v6: rebased.
v7: rebased.
Tested-by: Xiang Haihao <haihao.xiang at intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
Signed-off-by: Peter Antoine <peter.antoine at intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee at intel.com>
---
drivers/gpu/drm/i915/i915_drv.c | 5 +++++
drivers/gpu/drm/i915/intel_huc.h | 1 +
drivers/gpu/drm/i915/intel_huc_loader.c | 14 ++++++++++++++
include/uapi/drm/i915_drm.h | 1 +
4 files changed, 21 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index aa44d8d..52a1941 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -49,6 +49,8 @@
#include "i915_trace.h"
#include "i915_vgpu.h"
#include "intel_drv.h"
+#include "intel_guc.h"
+#include "intel_huc.h"
static struct drm_driver driver;
@@ -346,6 +348,9 @@ static int i915_getparam(struct drm_device *dev, void *data,
*/
value = 1;
break;
+ case I915_PARAM_HAS_HUC:
+ value = intel_is_huc_valid(dev_priv);
+ break;
default:
DRM_DEBUG("Unknown parameter %d\n", param->param);
return -EINVAL;
diff --git a/drivers/gpu/drm/i915/intel_huc.h b/drivers/gpu/drm/i915/intel_huc.h
index 3ce0299..2e150be 100644
--- a/drivers/gpu/drm/i915/intel_huc.h
+++ b/drivers/gpu/drm/i915/intel_huc.h
@@ -39,4 +39,5 @@ struct intel_huc {
void intel_huc_init(struct drm_device *dev);
void intel_huc_fini(struct drm_device *dev);
int intel_huc_load(struct drm_device *dev);
+extern int intel_is_huc_valid(struct drm_i915_private *dev_priv);
#endif
diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c b/drivers/gpu/drm/i915/intel_huc_loader.c
index a388437..df149b7 100644
--- a/drivers/gpu/drm/i915/intel_huc_loader.c
+++ b/drivers/gpu/drm/i915/intel_huc_loader.c
@@ -290,3 +290,17 @@ void intel_huc_fini(struct drm_device *dev)
huc_fw->fetch_status = UC_FIRMWARE_NONE;
}
+
+/**
+ * intel_is_huc_valid() - Check to see if the HuC is fully loaded.
+ * @dev_priv: drm device to check.
+ *
+ * This function will return true if the guc has been loaded and
+ * has valid firmware. The simplest way of doing this is to check
+ * if the HuC has been validated, if so it must have been loaded.
+ */
+int intel_is_huc_valid(struct drm_i915_private *dev_priv)
+{
+ return ((I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED) != 0);
+}
+
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
index 03725fe..aa7667e 100644
--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -388,6 +388,7 @@ typedef struct drm_i915_irq_wait {
#define I915_PARAM_HAS_POOLED_EU 38
#define I915_PARAM_MIN_EU_IN_POOL 39
#define I915_PARAM_MMAP_GTT_VERSION 40
+#define I915_PARAM_HAS_HUC 42
typedef struct drm_i915_getparam {
__s32 param;
--
2.7.4
More information about the Intel-gfx
mailing list