[Intel-gfx] [PATCH 2/2] drm/i915/dp: Validate mode against max. link data rate for DP MST
Pandiyan, Dhinakaran
dhinakaran.pandiyan at intel.com
Mon Nov 14 21:35:30 UTC 2016
On Thu, 2016-11-10 at 15:32 -0800, Manasi Navare wrote:
> On Wed, Nov 09, 2016 at 09:32:30PM -0800, Dhinakaran Pandiyan wrote:
> > Not validating the the mode rate against link rate results not pruning
> > invalid modes. For e.g, HBR2 5.4 Gpbs 2 lane configuration does not
> > support 4k @ 60Hz. But, we do not reject this mode currently.
> >
> > So, make use of the helpers in intel_dp in validate mode rates against
> > max. data rate of a configuration.
> >
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 4 ++--
> > drivers/gpu/drm/i915/intel_dp_mst.c | 12 +++++++++++-
> > drivers/gpu/drm/i915/intel_drv.h | 2 ++
> > 3 files changed, 15 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 7a9e122..7a73e43 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -161,14 +161,14 @@ static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
> > return min(source_max, sink_max);
> > }
> >
> > -static int
> > +int
> > intel_dp_link_required(int pixel_clock, int bpp)
> > {
> > /* pixel_clock is in kHz, divide bpp by 8 to return the value in kBps*/
> > return (pixel_clock * bpp + 7) / 8;
> > }
> >
> > -static int
> > +int
> > intel_dp_max_data_rate(int max_link_clock, int max_lanes)
> > {
> > /* max_link_clock is the link symbol clock (LS_Clk) in kHz and not the
> > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> > index 3ffbd69..38d2ce0 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > @@ -335,7 +335,17 @@ static enum drm_mode_status
> > intel_dp_mst_mode_valid(struct drm_connector *connector,
> > struct drm_display_mode *mode)
> > {
> > + struct intel_connector *intel_connector = to_intel_connector(connector);
> > + struct intel_dp *intel_dp = intel_connector->mst_port;
> > int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> > + int link_clock = intel_dp_max_link_rate(intel_dp);
> > + int lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
> > + int bpp = 24; /* MST uses fixed bpp */
> > + int mode_rate;
> > + int link_max_data_rate;
>
> In the SST equivalent mode_valid function, this variable is named as
> max_rate, I think you should name it as max_rate as well for consistency.
> Other than that this looks good, we definitely need this for mode validation
> at an early stage.
>
> Regards
> Manasi
>
Well, one of the goals of Patch 1/2 is to reduce ambiguity that has led
to some confusing hacks. I prefer clarity over consistency and anyway
this variable is local to this function :)
-DK
> > +
> > + link_max_data_rate = intel_dp_max_data_rate(link_clock, lane_count);
> > + mode_rate = intel_dp_link_required(mode->clock, bpp);
> >
> > /* TODO - validate mode against available PBN for link */
> > if (mode->clock < 10000)
> > @@ -344,7 +354,7 @@ intel_dp_mst_mode_valid(struct drm_connector *connector,
> > if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > return MODE_H_ILLEGAL;
> >
> > - if (mode->clock > max_dotclk)
> > + if (mode_rate > link_max_data_rate || mode->clock > max_dotclk)
> > return MODE_CLOCK_HIGH;
> >
> > return MODE_OK;
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index c2f3863..313419d 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1471,6 +1471,8 @@ bool intel_dp_read_dpcd(struct intel_dp *intel_dp);
> > bool __intel_dp_read_desc(struct intel_dp *intel_dp,
> > struct intel_dp_desc *desc);
> > bool intel_dp_read_desc(struct intel_dp *intel_dp);
> > +int intel_dp_link_required(int pixel_clock, int bpp);
> > +int intel_dp_max_data_rate(int max_link_clock, int max_lanes);
> >
> > /* intel_dp_aux_backlight.c */
> > int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector);
> > --
> > 2.7.4
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list