[Intel-gfx] ✗ Fi.CI.BAT: warning for drm/i915: Add a per-pipe plane identifier enum (rev4)
Imre Deak
imre.deak at intel.com
Tue Nov 15 10:47:52 UTC 2016
On ma, 2016-11-14 at 20:11 +0200, Ville Syrjälä wrote:
> On Wed, Nov 09, 2016 at 04:24:58PM -0000, Patchwork wrote:
> > == Series Details ==
> >
> > Series: drm/i915: Add a per-pipe plane identifier enum (rev4)
> > URL : https://patchwork.freedesktop.org/series/14978/
> > State : warning
> >
> > == Summary ==
> >
> > Series 14978v4 drm/i915: Add a per-pipe plane identifier enum
> > https://patchwork.freedesktop.org/api/1.0/series/14978/revisions/4/mbox/
> >
> > Test drv_module_reload_basic:
> > pass -> DMESG-WARN (fi-skl-6770hq)
>
> [ 26.882144] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)
> [ 26.882800] [drm:drm_dp_dual_mode_detect] DP dual mode adaptor ID: 44 (err 0)
> [ 26.882823] [drm:lspcon_init [i915]] No LSPCON detected, found type 1 HDMI
> [ 26.882862] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
> [ 26.882884] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
>
> The bug seems to contain multiple lspcon issues potentially, so not sure
> if we're tracking it all there or what:
> https://bugs.freedesktop.org/show_bug.cgi?id=98353
Yes, the errors in the above dmesg log are the only remaining (known)
issue now tracked in that bug. Will clarify this in the bug
description.
> > Test kms_force_connector_basic:
> > Subgroup force-connector-state:
> > pass -> SKIP (fi-ivb-3520m)
> > Subgroup force-edid:
> > pass -> SKIP (fi-ivb-3520m)
> > Subgroup force-load-detect:
> > pass -> SKIP (fi-ivb-3520m)
> > Subgroup prune-stale-modes:
> > pass -> SKIP (fi-ivb-3520m)
>
> [ 325.952021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1]
> [ 325.952051] [drm:intel_crt_detect [i915]] [CONNECTOR:50:VGA-1] force=1
> [ 325.952087] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x40f40000, result 0
> [ 325.952112] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
> [ 325.952392] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
> [ 325.952421] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
> [ 325.953097] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
> [ 325.953104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
> [ 325.953132] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 325.953159] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 325.954322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
> [ 325.954351] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 325.954378] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
> [ 325.954383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1] disconnected
> [ 325.954746] [drm:status_store] [CONNECTOR:50:VGA-1] force updated from 0 to 2 or reprobing
> [ 325.954752] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1]
> [ 325.954758] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1] status updated from disconnected to connected
> [ 325.955068] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
> [ 325.955098] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
> [ 325.955334] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
> [ 325.955341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
> [ 325.955368] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 325.955394] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 325.956456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
> [ 325.956484] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 325.956563] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1] probed modes :
> [ 325.956584] [drm:drm_mode_debug_printmodeline] Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 325.956594] [drm:drm_mode_debug_printmodeline] Modeline 72:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 325.956601] [drm:drm_mode_debug_printmodeline] Modeline 71:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 325.956613] [drm:drm_mode_debug_printmodeline] Modeline 73:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
> [ 325.956620] [drm:drm_mode_debug_printmodeline] Modeline 70:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
> ...
> [ 339.524802] [drm:status_store] [CONNECTOR:50:VGA-1] force updated from 2 to 0 or reprobing
> [ 339.524808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1]
> [ 339.524845] [drm:intel_crt_detect [i915]] [CONNECTOR:50:VGA-1] force=1
> [ 339.524880] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x43f40000, result 1
> [ 339.524904] [drm:intel_crt_detect [i915]] CRT detected via hotplug
> [ 339.525639] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
> [ 339.525681] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
> [ 339.525941] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
> [ 339.526246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
> [ 339.526288] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 339.526330] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 339.527481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
> [ 339.527512] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 339.527562] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1] probed modes :
> [ 339.527568] [drm:drm_mode_debug_printmodeline] Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 339.527572] [drm:drm_mode_debug_printmodeline] Modeline 72:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 339.527576] [drm:drm_mode_debug_printmodeline] Modeline 71:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 339.527581] [drm:drm_mode_debug_printmodeline] Modeline 73:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
> [ 339.527585] [drm:drm_mode_debug_printmodeline] Modeline 70:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
> [ 339.552201] [drm:drm_fb_helper_hotplug_event]
>
> So something a bit fishy going on with the CRT HPD on that machine.
>
> >
> > fi-bdw-5557u total:244 pass:229 dwarn:0 dfail:0 fail:0 skip:15
> > fi-bsw-n3050 total:244 pass:204 dwarn:0 dfail:0 fail:0 skip:40
> > fi-bxt-t5700 total:244 pass:216 dwarn:0 dfail:0 fail:0 skip:28
> > fi-byt-j1900 total:244 pass:216 dwarn:0 dfail:0 fail:0 skip:28
> > fi-byt-n2820 total:244 pass:212 dwarn:0 dfail:0 fail:0 skip:32
> > fi-hsw-4770 total:244 pass:224 dwarn:0 dfail:0 fail:0 skip:20
> > fi-hsw-4770r total:244 pass:224 dwarn:0 dfail:0 fail:0 skip:20
> > fi-ilk-650 total:244 pass:191 dwarn:0 dfail:0 fail:0 skip:53
> > fi-ivb-3520m total:244 pass:218 dwarn:0 dfail:0 fail:0 skip:26
> > fi-ivb-3770 total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22
> > fi-kbl-7200u total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22
> > fi-skl-6260u total:244 pass:230 dwarn:0 dfail:0 fail:0 skip:14
> > fi-skl-6700hq total:244 pass:223 dwarn:0 dfail:0 fail:0 skip:21
> > fi-skl-6700k total:244 pass:222 dwarn:1 dfail:0 fail:0 skip:21
> > fi-skl-6770hq total:244 pass:229 dwarn:1 dfail:0 fail:0 skip:14
> > fi-snb-2520m total:244 pass:212 dwarn:0 dfail:0 fail:0 skip:32
> > fi-snb-2600 total:244 pass:211 dwarn:0 dfail:0 fail:0 skip:33
> >
> > 74d13d4fab710f664d5eeb15fd3de821a7f46818 drm-intel-nightly: 2016y-11m-09d-15h-02m-46s UTC integration manifest
> > e7fdae4 drm/i915: Don't populate plane->plane for cursors and sprites
> > 776f170 drm/i915: Rename the local 'plane' variable to 'plane_id' in primary plane code
> > 8a691eb drm/i915: Use enum plane_id in VLV/CHV wm code
> > daca75f drm/i915: Use enum plane_id in VLV/CHV sprite code
> > 2fc5a0b drm/i915: Use enum plane_id in SKL plane code
> > 698ce5d drm/i915: Use enum plane_id in SKL wm code
> > e6a137a drm/i915: Add crtc->plane_ids_mask
> > e37903b drm/i915: Add per-pipe plane identifier
> > caadefb drm/i915: Remove some duplicated plane swapping logic
> >
> > == Logs ==
> >
> > For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2943/
>
More information about the Intel-gfx
mailing list