[Intel-gfx] [PATCH CI run 3/3] drm/i915: Adding the parsing logic for the i2c element

[Mika Kahola]

New sequence element for i2c is been added in the
mipi sequence block of the VBT. This patch parses
and executes the i2c sequence.

v2: Add i2c_put_adapter call(Jani), rebase

v3: corrected the retry loop(Jani), rebase

v4 by Jani:
 - don't put the adapter if get fails
  - print an error message if all retries exhausted
   - use a for loop
    - fix warnings for unused variables

v5 by Jani:
 - rebase on the skip i2c element patch

v6: by Jani:
 - ignore the gmbus i2c elements (Ville)

v7: by Deepak
 - Use the i2c port number which is read from ACPI
    based on the resource id.

v8: by Mika
 - rebase

Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: vkorjani <vikas.korjani at intel.com>
Signed-off-by: Deepak M <m.deepak at intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Mika Kahola <mika.kahola at intel.com>
---
 drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 78 +++++++++++++++++++++++++++++-
 1 file changed, 76 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index a4cbe68..7fe57c2 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -1004,9 +1004,83 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
 
 static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
 {
-	DRM_DEBUG_KMS("Skipping I2C element execution\n");
+	struct drm_i915_private *dev_priv = intel_dsi->base.base.dev->dev_private;
+	struct i2c_adapter *adapter;
+	int ret, i;
+	u8 reg_offset, payload_size;
+	struct i2c_msg msg;
+	struct acpi_i2c_data_node *i2c_entry = NULL;
+	u8 *transmit_buffer;
+	u8 flag, resource_id, bus_number;
+	u16 slave_add;
+	u8 count = 0;
+
+	flag = *data++;
+	resource_id = *data++;
+	bus_number = *data++;
+	slave_add = *(u16 *)(data);
+	data += 2;
+	reg_offset = *data++;
+	payload_size = *data++;
+
+	if (resource_id == 0xff || bus_number == 0xff) {
+		DRM_DEBUG_KMS("ignoring gmbus (resource id %02x, bus %02x)\n",
+			      resource_id, bus_number);
+		goto out;
+	}
+
+	/* Parse the list and get the required i2c bus number */
+	list_for_each_entry(i2c_entry, &dev_priv->acpi_i2c_list,
+				head) {
+		if (count == resource_id) {
+			/* override the busnumber */
+			bus_number = i2c_entry->i2c_bus_number;
+			break;
+		}
+		count++;
+	}
+
+	/*
+	 * Since the i2c bus number indexing in BIOS starts from 1
+	 * decrementing the bus number which we are reading.
+	 */
+	bus_number--;
 
-	return data + *(data + 6) + 7;
+	adapter = i2c_get_adapter(bus_number);
+	if (!adapter) {
+		DRM_ERROR("i2c_get_adapter(%u)\n", bus_number);
+		goto out;
+	}
+
+	transmit_buffer = kmalloc(1 + payload_size, GFP_TEMPORARY);
+	if (!transmit_buffer)
+		goto out_put;
+
+	transmit_buffer[0] = reg_offset;
+	memcpy(&transmit_buffer[1], data, payload_size);
+
+	msg.addr = slave_add;
+	msg.flags = 0;
+	msg.len = payload_size + 1;
+	msg.buf = &transmit_buffer[0];
+
+	for (i = 0; i < 6; i++) {
+		ret = i2c_transfer(adapter, &msg, 1);
+		if (ret == 1)
+			goto out_free;
+		else if (ret == -EAGAIN)
+			usleep_range(1000, 2500);
+		else
+			break;
+	}
+
+	DRM_ERROR("i2c transfer failed: %d\n", ret);
+out_free:
+	kfree(transmit_buffer);
+out_put:
+	i2c_put_adapter(adapter);
+out:
+	return data + payload_size;
 }
 
 static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data)
-- 
2.7.4