[Intel-gfx] [PATCH v6 5/8] drm/i915/skl+: change WM calc to fixed point 16.16
Mahesh Kumar
mahesh1.kumar at intel.com
Thu Nov 24 04:01:32 UTC 2016
This patch changes Watermak calculation to fixed point calculation.
Problem with current calculation is during plane_blocks_per_line
calculation we divide intermediate blocks with min_scanlines and
takes floor of the result because of integer operation.
hence we end-up assigning less blocks than required. Which leads to
flickers.
Changes since V1:
- Add fixed point data type as per Paulo's review
Changes since V1:
- use fixed_point instead of fp_16_16
Signed-off-by: Mahesh Kumar <mahesh1.kumar at intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 84 +++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_pm.c | 69 +++++++++++++++++++--------------
2 files changed, 124 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6691a4e..e332f04 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -119,6 +119,90 @@ bool __i915_inject_load_failure(const char *func, int line);
#define i915_inject_load_failure() \
__i915_inject_load_failure(__func__, __LINE__)
+typedef struct {
+ uint32_t val;
+} uint_fixed_16_16_t;
+
+#define FP_16_16_MAX ({ \
+ uint_fixed_16_16_t fp; \
+ fp.val = UINT_MAX; \
+ fp; \
+})
+
+static inline uint_fixed_16_16_t u32_to_fixed_point(uint32_t val)
+{
+ uint_fixed_16_16_t fp;
+
+ WARN_ON(val >> 16);
+
+ fp.val = val << 16;
+ return fp;
+}
+
+static inline uint32_t fixed_point_to_u32_round_up(uint_fixed_16_16_t fp)
+{
+ return DIV_ROUND_UP(fp.val, 1 << 16);
+}
+
+static inline uint32_t fixed_point_to_u32(uint_fixed_16_16_t fp)
+{
+ return (fp.val / (1 << 16));
+}
+
+static inline uint_fixed_16_16_t min_fixed_point(uint_fixed_16_16_t min1,
+ uint_fixed_16_16_t min2)
+{
+ uint_fixed_16_16_t min;
+
+ min.val = min(min1.val, min2.val);
+ return min;
+}
+
+static inline uint_fixed_16_16_t max_fixed_point(uint_fixed_16_16_t max1,
+ uint_fixed_16_16_t max2)
+{
+ uint_fixed_16_16_t max;
+
+ max.val = max(max1.val, max2.val);
+ return max;
+}
+
+static inline uint_fixed_16_16_t fixed_point_div_round_up(uint32_t val,
+ uint32_t d)
+{
+ uint_fixed_16_16_t fp, res;
+
+ fp = u32_to_fixed_point(val);
+ res.val = DIV_ROUND_UP(fp.val, d);
+ return res;
+}
+
+static inline uint_fixed_16_16_t fixed_point_div_round_up_u64(uint32_t val,
+ uint32_t d)
+{
+ uint_fixed_16_16_t res;
+ uint64_t interm_val;
+
+ interm_val = (uint64_t)val << 16;
+ interm_val = DIV_ROUND_UP_ULL(interm_val, d);
+ WARN_ON(interm_val >> 32);
+ res.val = (uint32_t) interm_val;
+
+ return res;
+}
+
+static inline uint_fixed_16_16_t mul_fixed_point_u32(uint32_t val,
+ uint_fixed_16_16_t mul)
+{
+ uint64_t intermediate_val;
+ uint_fixed_16_16_t fp;
+
+ intermediate_val = (uint64_t) val * mul.val;
+ WARN_ON(intermediate_val >> 32);
+ fp.val = (uint32_t) intermediate_val;
+ return fp;
+}
+
static inline const char *yesno(bool v)
{
return v ? "yes" : "no";
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index df6d231..3e2dd8f 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3516,32 +3516,35 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
* should allow pixel_rate up to ~2 GHz which seems sufficient since max
* 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
*/
-static uint32_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, uint32_t latency)
+static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
+ uint32_t latency)
{
- uint32_t wm_intermediate_val, ret;
+ uint32_t wm_intermediate_val;
+ uint_fixed_16_16_t ret;
if (latency == 0)
- return UINT_MAX;
-
- wm_intermediate_val = latency * pixel_rate * cpp / 512;
- ret = DIV_ROUND_UP(wm_intermediate_val, 1000);
+ return FP_16_16_MAX;
+ wm_intermediate_val = latency * pixel_rate * cpp;
+ ret = fixed_point_div_round_up_u64(wm_intermediate_val, 1000 * 512);
return ret;
}
-static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
- uint32_t latency, uint32_t plane_blocks_per_line)
+static uint_fixed_16_16_t skl_wm_method2(uint32_t pixel_rate,
+ uint32_t pipe_htotal,
+ uint32_t latency,
+ uint_fixed_16_16_t plane_blocks_per_line)
{
- uint32_t ret;
uint32_t wm_intermediate_val;
+ uint_fixed_16_16_t ret;
if (latency == 0)
- return UINT_MAX;
+ return FP_16_16_MAX;
wm_intermediate_val = latency * pixel_rate;
- ret = DIV_ROUND_UP(wm_intermediate_val, pipe_htotal * 1000) *
- plane_blocks_per_line;
-
+ wm_intermediate_val = DIV_ROUND_UP(wm_intermediate_val,
+ pipe_htotal * 1000);
+ ret = mul_fixed_point_u32(wm_intermediate_val, plane_blocks_per_line);
return ret;
}
@@ -3581,14 +3584,17 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
struct drm_plane_state *pstate = &intel_pstate->base;
struct drm_framebuffer *fb = pstate->fb;
uint32_t latency = dev_priv->wm.skl_latency[level];
- uint32_t method1, method2;
- uint32_t plane_bytes_per_line, plane_blocks_per_line;
+ uint_fixed_16_16_t method1, method2;
+ uint_fixed_16_16_t plane_blocks_per_line;
+ uint_fixed_16_16_t selected_result;
+ uint32_t interm_pbpl;
+ uint32_t plane_bytes_per_line;
uint32_t res_blocks, res_lines;
- uint32_t selected_result;
uint8_t cpp;
uint32_t width = 0, height = 0;
uint32_t plane_pixel_rate;
- uint32_t y_tile_minimum, y_min_scanlines;
+ uint_fixed_16_16_t y_tile_minimum;
+ uint32_t y_min_scanlines;
struct intel_atomic_state *state =
to_intel_atomic_state(cstate->base.state);
bool apply_memory_bw_wa = skl_needs_memory_bw_wa(state);
@@ -3647,14 +3653,16 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
plane_bytes_per_line = width * cpp;
if (y_tiled) {
+ interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line *
+ y_min_scanlines, 512);
plane_blocks_per_line =
- DIV_ROUND_UP(plane_bytes_per_line * y_min_scanlines, 512);
- plane_blocks_per_line /= y_min_scanlines;
+ fixed_point_div_round_up(interm_pbpl, y_min_scanlines);
} else if (x_tiled) {
- plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
+ interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line, 512);
+ plane_blocks_per_line = u32_to_fixed_point(interm_pbpl);
} else {
- plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512)
- + 1;
+ interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line, 512) + 1;
+ plane_blocks_per_line = u32_to_fixed_point(interm_pbpl);
}
method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
@@ -3663,26 +3671,29 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
latency,
plane_blocks_per_line);
- y_tile_minimum = plane_blocks_per_line * y_min_scanlines;
+ y_tile_minimum = mul_fixed_point_u32(y_min_scanlines,
+ plane_blocks_per_line);
if (y_tiled) {
- selected_result = max(method2, y_tile_minimum);
+ selected_result = max_fixed_point(method2, y_tile_minimum);
} else {
if ((cpp * cstate->base.adjusted_mode.crtc_htotal / 512 < 1) &&
(plane_bytes_per_line / 512 < 1))
selected_result = method2;
- else if ((ddb_allocation / plane_blocks_per_line) >= 1)
- selected_result = min(method1, method2);
+ else if ((ddb_allocation /
+ fixed_point_to_u32_round_up(plane_blocks_per_line)) >= 1)
+ selected_result = min_fixed_point(method1, method2);
else
selected_result = method1;
}
- res_blocks = selected_result + 1;
- res_lines = DIV_ROUND_UP(selected_result, plane_blocks_per_line);
+ res_blocks = fixed_point_to_u32_round_up(selected_result) + 1;
+ res_lines = DIV_ROUND_UP(selected_result.val,
+ plane_blocks_per_line.val);
if (level >= 1 && level <= 7) {
if (y_tiled) {
- res_blocks += y_tile_minimum;
+ res_blocks += fixed_point_to_u32_round_up(y_tile_minimum);
res_lines += y_min_scanlines;
} else {
res_blocks++;
--
2.10.1
More information about the Intel-gfx
mailing list