[Intel-gfx] [PATCH 3/3] drm/i915: enable dp mst audio

Jani Nikula jani.nikula at linux.intel.com
Tue Nov 29 09:28:18 UTC 2016


On Mon, 28 Nov 2016, libin.yang at intel.com wrote:
> From: Libin Yang <libin.yang at intel.com>
>
> This patch adds support for DP MST audio in i915.
>
> Enable audio codec when DP MST is enabled if has_audio flag is set.
> Disable audio codec when DP MST is disabled if has_audio flag is set.
>
> Another separated patches to support DP MST audio will be implemented
> in audio driver.
>
> This patch is ported from
> commit 3708d5e082c3 ("drm/i915: start adding dp mst audio")
>
> And because commit 3708d5e082c3 ("drm/i915: start adding dp mst audio")
> breaks MST multi-monitor setups on some platforms, the orignal patch is
> reverted by
> commit be754b101f70 ("Revert "drm/i915: start adding dp mst audio"")
>
> As the multi-monitor setups issue is fixed, let's port the patch and
> enable the dp mst audio.
>
> Signed-off-by: Libin Yang <libin.yang at intel.com>
> Cc: Lyude <cpaul at redhat.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>

Looks nicer now.

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  drivers/gpu/drm/i915/intel_dp_mst.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index b029d10..1f98757f 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -37,6 +37,8 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
>  	struct intel_digital_port *intel_dig_port = intel_mst->primary;
>  	struct intel_dp *intel_dp = &intel_dig_port->dp;
> +	struct intel_connector *connector =
> +		to_intel_connector(conn_state->connector);
>  	struct drm_atomic_state *state;
>  	int bpp;
>  	int lane_count, slots;
> @@ -58,6 +60,8 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  
>  	state = pipe_config->base.state;
>  
> +	if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, connector->port))
> +		pipe_config->has_audio = true;
>  	mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
>  
>  	pipe_config->pbn = mst_pbn;
> @@ -83,6 +87,7 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
>  	struct intel_dp *intel_dp = &intel_dig_port->dp;
>  	struct intel_connector *connector =
>  		to_intel_connector(old_conn_state->connector);
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	int ret;
>  
>  	DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
> @@ -93,6 +98,10 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
>  	if (ret) {
>  		DRM_ERROR("failed to update payload %d\n", ret);
>  	}
> +	if (old_crtc_state->has_audio) {
> +		intel_audio_codec_disable(encoder);
> +		intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
> +	}
>  }
>  
>  static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
> @@ -205,6 +214,10 @@ static void intel_mst_enable_dp(struct intel_encoder *encoder,
>  	ret = drm_dp_check_act_status(&intel_dp->mst_mgr);
>  
>  	ret = drm_dp_update_payload_part2(&intel_dp->mst_mgr);
> +	if (pipe_config->has_audio) {
> +		intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
> +		intel_audio_codec_enable(encoder, pipe_config, conn_state);
> +	}
>  }
>  
>  static bool intel_dp_mst_enc_get_hw_state(struct intel_encoder *encoder,
> @@ -227,6 +240,9 @@ static void intel_dp_mst_enc_get_config(struct intel_encoder *encoder,
>  	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
>  	u32 temp, flags = 0;
>  
> +	pipe_config->has_audio =
> +		intel_ddi_is_audio_enabled(dev_priv, crtc);
> +
>  	temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
>  	if (temp & TRANS_DDI_PHSYNC)
>  		flags |= DRM_MODE_FLAG_PHSYNC;

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list