[Intel-gfx] [PATCH 7/9] drm/i915: Create a struct to hold information about the broxton phys
Imre Deak
imre.deak at intel.com
Thu Oct 6 10:08:03 UTC 2016
On to, 2016-10-06 at 12:56 +0300, Imre Deak wrote:
> On ke, 2016-10-05 at 15:09 +0300, Ander Conselvan de Oliveira wrote:
> > Information about which phy is dual channel is hardcoded in the phy
> > init
> > sequence. Split that to a separate struct so the init sequence is
> > more
> > generic.
> >
> > Signed-off-by: Ander Conselvan de Oliveira
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 9 +++--
> > drivers/gpu/drm/i915/intel_dpio_phy.c | 63
> > +++++++++++++++++++++++++++++------
> > 2 files changed, 60 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index f6d29fb..d3802c6 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -1308,8 +1308,13 @@ enum skl_disp_power_wells {
> > #define BXT_PORT_CL1CM_DW30(phy) _BXT_PHY((phy),
> > _PORT_CL1CM_DW30_BC, \
> > _PORT_CL1C
> > M_DW30_A)
> >
> > -/* Defined for PHY0 only */
> > -#define BXT_PORT_CL2CM_DW6_BC _MMIO(0x6C358)
> > +/* The spec defines this only for BXT PHY0, but lets assume that
> > this
> > + * would exist for PHY1 too if it had a second channel.
> > + */
> > +#define _PORT_CL2CM_DW6_A 0x162358
> > +#define _PORT_CL2CM_DW6_BC 0x6C358
> > +#define BXT_PORT_CL2CM_DW6(phy) _BXT_PHY((phy),
> > _PORT_CL2CM_DW6_BC, \
> > + _PORT_CL2C
> > M_DW6_A)
> > #define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28)
> >
> > /* BXT PHY Ref registers */
> > diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c
> > b/drivers/gpu/drm/i915/intel_dpio_phy.c
> > index 2a18724..66d750a 100644
> > --- a/drivers/gpu/drm/i915/intel_dpio_phy.c
> > +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
> > @@ -114,6 +114,49 @@
> > * -----------------
> > */
> >
> > +/**
> > + * struct bxt_ddi_phy_info - Hold info for a broxton DDI phy
> > + */
> > +struct bxt_ddi_phy_info {
> > + /**
> > + * @dual_channel: true if this phy has a second channel.
> > + */
> > + bool dual_channel;
> > +
> > + /**
> > + * @channel: struct containing per channel information.
> > + */
> > + struct {
> > + /**
> > + * @port: which port maps to this channel.
> > + */
> > + enum port port;
> > + } channel[2];
>
> Nitpick: could this be just a port mask?
Ah, just noticed in patch 9 that it cannot, so ignore the above.
>
> Patches 1-8 look good to me, with or without the nit changes on
> those:
> Reviewed-by: Imre Deak <imre.deak at intel.com>
>
> > +};
> > +
> > +static const struct bxt_ddi_phy_info bxt_ddi_phy_info[] = {
> > + [DPIO_PHY0] = {
> > + .dual_channel = true,
> > +
> > + .channel = {
> > + [DPIO_CH0] = { .port = PORT_B },
> > + [DPIO_CH1] = { .port = PORT_C },
> > + }
> > + },
> > + [DPIO_PHY1] = {
> > + .dual_channel = false,
> > +
> > + .channel = {
> > + [DPIO_CH0] = { .port = PORT_A },
> > + }
> > + },
> > +};
> > +
> > +{
> > + return (phy_info->dual_channel * BIT(phy_info-
> > >channel[DPIO_CH1].port)) |
> > + BIT(phy_info->channel[DPIO_CH0].port);
> > +}
> > +
> > void bxt_ddi_phy_set_signal_level(struct drm_i915_private
> > *dev_priv,
> > enum port port, u32 margin, u32
> > scale,
> > u32 enable, u32 deemphasis)
> > @@ -183,9 +226,7 @@ bool bxt_ddi_phy_is_enabled(struct
> > drm_i915_private *dev_priv,
> > return false;
> > }
> >
> > - for_each_port_masked(port,
> > - phy == DPIO_PHY0 ? BIT(PORT_B) |
> > BIT(PORT_C) :
> > - BIT(PORT_A)) {
> > + for_each_port_masked(port, bxt_phy_port_mask(phy_info)) {
> > u32 tmp = I915_READ(BXT_PHY_CTL(port));
> >
> > if (tmp & BXT_PHY_CMNLANE_POWERDOWN_ACK) {
> > @@ -220,6 +261,7 @@ static void bxt_phy_wait_grc_done(struct
> > drm_i915_private *dev_priv,
> >
> > void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum
> > dpio_phy phy)
> > {
> > + const struct bxt_ddi_phy_info *phy_info =
> > &bxt_ddi_phy_info[phy];
> > u32 val;
> >
> > if (bxt_ddi_phy_is_enabled(dev_priv, phy)) {
> > @@ -272,10 +314,10 @@ void bxt_ddi_phy_init(struct drm_i915_private
> > *dev_priv, enum dpio_phy phy)
> > SUS_CLK_CONFIG;
> > I915_WRITE(BXT_PORT_CL1CM_DW28(phy), val);
> >
> > - if (phy == DPIO_PHY0) {
> > - val = I915_READ(BXT_PORT_CL2CM_DW6_BC);
> > + if (phy_info->dual_channel) {
> > + val = I915_READ(BXT_PORT_CL2CM_DW6(phy));
> > val |= DW6_OLDO_DYN_PWR_DOWN_EN;
> > - I915_WRITE(BXT_PORT_CL2CM_DW6_BC, val);
> > + I915_WRITE(BXT_PORT_CL2CM_DW6(phy), val);
> > }
> >
> > val = I915_READ(BXT_PORT_CL1CM_DW30(phy));
> > @@ -290,7 +332,7 @@ void bxt_ddi_phy_init(struct drm_i915_private
> > *dev_priv, enum dpio_phy phy)
> > * FIXME: Clarify programming of the following, the
> > register is
> > * read-only with bit 6 fixed at 0 at least in stepping A.
> > */
> > - if (phy == DPIO_PHY1)
> > + if (!phy_info->dual_channel)
> > val |= OCL2_LDOFUSE_PWR_DIS;
> > I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val);
> >
> > @@ -363,6 +405,7 @@ __phy_reg_verify_state(struct drm_i915_private
> > *dev_priv, enum dpio_phy phy,
> > bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv,
> > enum dpio_phy phy)
> > {
> > + const struct bxt_ddi_phy_info *phy_info =
> > &bxt_ddi_phy_info[phy];
> > uint32_t mask;
> > bool ok;
> >
> > @@ -388,10 +431,10 @@ bool bxt_ddi_phy_verify_state(struct
> > drm_i915_private *dev_priv,
> > ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask,
> > "BXT_PORT_CL1CM_DW28(%d)", phy);
> >
> > - if (phy == DPIO_PHY0)
> > - ok &= _CHK(BXT_PORT_CL2CM_DW6_BC,
> > + if (phy_info->dual_channel)
> > + ok &= _CHK(BXT_PORT_CL2CM_DW6(phy),
> > DW6_OLDO_DYN_PWR_DOWN_EN,
> > DW6_OLDO_DYN_PWR_DOWN_EN,
> > - "BXT_PORT_CL2CM_DW6_BC");
> > + "BXT_PORT_CL2CM_DW6(%d)", phy);
> >
> > /*
> > * TODO: Verify BXT_PORT_CL1CM_DW30 bit
> > OCL2_LDOFUSE_PWR_DIS,
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list