[Intel-gfx] [PATCH v4] tools/intel_guc_logger: Utility for capturing GuC firmware logs in a file
akash.goel at intel.com
akash.goel at intel.com
Mon Oct 10 10:59:32 UTC 2016
From: Akash Goel <akash.goel at intel.com>
This patch provides a test utility which helps capture GuC firmware logs and
then dump them to file.
The logs are pulled from a debugfs file '/sys/kernel/debug/dri/guc_log' and
by default stored into a file 'guc_log_dump.dat'. The name, including the
location, of the output file can be changed through a command line argument.
The utility goes into an infinite loop where it waits for the arrival of new
logs and as soon as new set of logs are produced it captures them in its local
buffer which is then flushed out to the file on disk.
Any time when logging needs to be ended, User can stop this utility (CTRL+C).
Before entering into a loop, it first discards whatever logs are present in
the debugfs file.
This way User can first launch this utility and then start a workload/activity
for which GuC firmware logs are to be actually captured and keep running the
utility for as long as its needed, like once the workload is over this utility
can be forcefully stopped.
If the logging wasn't enabled on GuC side by the Driver at boot time, utility
will first enable the logging and later on when it is stopped (CTRL+C) it will
also pause the logging on GuC side.
v2:
- Use combination of alarm system call & SIGALRM signal to run the utility
for required duration. (Tvrtko)
- Fix inconsistencies, do minor cleanup and refactoring. (Tvrtko)
v3:
- Fix discrepancy for the output file command line option and update the
Usage/help string.
v4:
- Update the exit condition for flusher thread, now will exit only after
the capture loop is over and not when the flag to stop logging is set.
This handles a corner case, due to which the dump of last captured buffer
was getting missed.
- Add a newline character at the end of assert messages.
- Avoid the assert for the case, which occurs very rarely, when there are no
bytes read from the relay file.
Cc: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com>
Signed-off-by: Akash Goel <akash.goel at intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com> (v3)
---
tools/Makefile.sources | 1 +
tools/intel_guc_logger.c | 438 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 439 insertions(+)
create mode 100644 tools/intel_guc_logger.c
diff --git a/tools/Makefile.sources b/tools/Makefile.sources
index 2bb6c8e..be58871 100644
--- a/tools/Makefile.sources
+++ b/tools/Makefile.sources
@@ -19,6 +19,7 @@ tools_prog_lists = \
intel_gpu_time \
intel_gpu_top \
intel_gtt \
+ intel_guc_logger \
intel_infoframes \
intel_l3_parity \
intel_lid \
diff --git a/tools/intel_guc_logger.c b/tools/intel_guc_logger.c
new file mode 100644
index 0000000..159a54e
--- /dev/null
+++ b/tools/intel_guc_logger.c
@@ -0,0 +1,438 @@
+
+#define _GNU_SOURCE /* For using O_DIRECT */
+#include <inttypes.h>
+#include <stdio.h>
+#include <fcntl.h>
+#include <sched.h>
+#include <sys/ioctl.h>
+#include <string.h>
+#include <errno.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/poll.h>
+#include <sys/wait.h>
+#include <sys/types.h>
+#include <sys/syscall.h>
+#include <sys/mman.h>
+#include <assert.h>
+#include <pthread.h>
+
+#include "igt.h"
+
+#define MB(x) ((uint64_t)(x) * 1024 * 1024)
+#ifndef PAGE_SIZE
+ #define PAGE_SIZE 4096
+#endif
+/* Currently the size of GuC log buffer is 19 pages & so is the size of relay
+ * subbuffer. If the size changes in future, then this define also needs to be
+ * updated accordingly.
+ */
+#define SUBBUF_SIZE (19*PAGE_SIZE)
+/* Need large buffering from logger side to hide the DISK IO latency, Driver
+ * can only store 8 snapshots of GuC log buffer in relay.
+ */
+#define NUM_SUBBUFS 100
+
+#define RELAY_FILE_NAME "guc_log"
+#define DEFAULT_OUTPUT_FILE_NAME "guc_log_dump.dat"
+#define CONTROL_FILE_NAME "i915_guc_log_control"
+
+char *read_buffer;
+char *out_filename;
+int poll_timeout = 2; /* by default 2ms timeout */
+pthread_mutex_t mutex;
+pthread_t flush_thread;
+int verbosity_level = 3; /* by default capture logs at max verbosity */
+uint32_t produced, consumed;
+uint64_t total_bytes_written;
+int num_buffers = NUM_SUBBUFS;
+int relay_fd, outfile_fd = -1;
+uint32_t test_duration, max_filesize;
+pthread_cond_t underflow_cond, overflow_cond;
+bool stop_logging, discard_oldlogs, capturing_stopped;
+
+static void guc_log_control(bool enable_logging)
+{
+ int control_fd;
+ char data[19];
+ uint64_t val;
+ int ret;
+
+ control_fd = igt_debugfs_open(CONTROL_FILE_NAME, O_WRONLY);
+ igt_assert_f(control_fd >= 0, "couldn't open the guc log control file\n");
+
+ val = enable_logging ? ((verbosity_level << 4) | 0x1) : 0;
+
+ ret = snprintf(data, sizeof(data), "0x%" PRIx64, val);
+ igt_assert(ret > 2 && ret < sizeof(data));
+
+ ret = write(control_fd, data, ret);
+ igt_assert_f(ret > 0, "couldn't write to the log control file\n");
+
+ close(control_fd);
+}
+
+static void int_sig_handler(int sig)
+{
+ igt_info("received signal %d\n", sig);
+
+ stop_logging = true;
+}
+
+static void pull_leftover_data(void)
+{
+ unsigned int bytes_read = 0;
+ int ret;
+
+ do {
+ /* Read the logs from relay buffer */
+ ret = read(relay_fd, read_buffer, SUBBUF_SIZE);
+ if (!ret)
+ break;
+
+ igt_assert_f(ret > 0, "failed to read from the guc log file\n");
+ igt_assert_f(ret == SUBBUF_SIZE, "invalid read from relay file\n");
+
+ bytes_read += ret;
+
+ if (outfile_fd >= 0) {
+ ret = write(outfile_fd, read_buffer, SUBBUF_SIZE);
+ igt_assert_f(ret == SUBBUF_SIZE, "couldn't dump the logs in a file\n");
+ total_bytes_written += ret;
+ }
+ } while(1);
+
+ igt_debug("%u bytes flushed\n", bytes_read);
+}
+
+static int num_filled_bufs(void)
+{
+ return (produced - consumed);
+}
+
+static void pull_data(void)
+{
+ char *ptr;
+ int ret;
+
+ pthread_mutex_lock(&mutex);
+ while (num_filled_bufs() >= num_buffers) {
+ igt_debug("overflow, will wait, produced %u, consumed %u\n", produced, consumed);
+ /* Stall the main thread in case of overflow, as there are no
+ * buffers available to store the new logs, otherwise there
+ * could be corruption if both threads work on the same buffer.
+ */
+ pthread_cond_wait(&overflow_cond, &mutex);
+ };
+ pthread_mutex_unlock(&mutex);
+
+ ptr = read_buffer + (produced % num_buffers) * SUBBUF_SIZE;
+
+ /* Read the logs from relay buffer */
+ ret = read(relay_fd, ptr, SUBBUF_SIZE);
+ igt_assert_f(ret >= 0, "failed to read from the guc log file\n");
+ igt_assert_f(!ret || ret == SUBBUF_SIZE, "invalid read from relay file\n");
+
+ if (ret) {
+ pthread_mutex_lock(&mutex);
+ produced++;
+ pthread_cond_signal(&underflow_cond);
+ pthread_mutex_unlock(&mutex);
+ } else {
+ /* Occasionally (very rare) read from the relay file returns no
+ * data, albeit the polling done prior to read call indicated
+ * availability of data.
+ */
+ igt_debug("no data read from the relay file\n");
+ }
+}
+
+static void *flusher(void *arg)
+{
+ char *ptr;
+ int ret;
+
+ igt_debug("execution started of flusher thread\n");
+
+ do {
+ pthread_mutex_lock(&mutex);
+ while (!num_filled_bufs()) {
+ /* Exit only after completing the flush of all the filled
+ * buffers as User would expect that all logs captured up
+ * till the point of interruption/exit are written out to
+ * the disk file.
+ */
+ if (capturing_stopped) {
+ igt_debug("flusher to exit now\n");
+ pthread_mutex_unlock(&mutex);
+ return NULL;
+ }
+ pthread_cond_wait(&underflow_cond, &mutex);
+ };
+ pthread_mutex_unlock(&mutex);
+
+ ptr = read_buffer + (consumed % num_buffers) * SUBBUF_SIZE;
+
+ ret = write(outfile_fd, ptr, SUBBUF_SIZE);
+ igt_assert_f(ret == SUBBUF_SIZE, "couldn't dump the logs in a file\n");
+
+ total_bytes_written += ret;
+ if (max_filesize && (total_bytes_written > MB(max_filesize))) {
+ igt_debug("reached the target of %" PRIu64 " bytes\n", MB(max_filesize));
+ stop_logging = true;
+ }
+
+ pthread_mutex_lock(&mutex);
+ consumed++;
+ pthread_cond_signal(&overflow_cond);
+ pthread_mutex_unlock(&mutex);
+ } while(1);
+
+ return NULL;
+}
+
+static void init_flusher_thread(void)
+{
+ struct sched_param thread_sched;
+ pthread_attr_t p_attr;
+ int ret;
+
+ pthread_cond_init(&underflow_cond, NULL);
+ pthread_cond_init(&overflow_cond, NULL);
+ pthread_mutex_init(&mutex, NULL);
+
+ ret = pthread_attr_init(&p_attr);
+ igt_assert_f(ret == 0, "error obtaining default thread attributes\n");
+
+ ret = pthread_attr_setinheritsched(&p_attr, PTHREAD_EXPLICIT_SCHED);
+ igt_assert_f(ret == 0, "couldn't set inheritsched\n");
+
+ ret = pthread_attr_setschedpolicy(&p_attr, SCHED_RR);
+ igt_assert_f(ret == 0, "couldn't set thread scheduling policy\n");
+
+ /* Keep the flusher task also at rt priority, so that it doesn't get
+ * too late in flushing the collected logs in local buffers to the disk,
+ * and so main thread always have spare buffers to collect the logs.
+ */
+ thread_sched.sched_priority = 5;
+ ret = pthread_attr_setschedparam(&p_attr, &thread_sched);
+ igt_assert_f(ret == 0, "couldn't set thread priority\n");
+
+ ret = pthread_create(&flush_thread, &p_attr, flusher, NULL);
+ igt_assert_f(ret == 0, "thread creation failed\n");
+
+ ret = pthread_attr_destroy(&p_attr);
+ igt_assert_f(ret == 0, "error destroying thread attributes\n");
+}
+
+static void open_relay_file(void)
+{
+ relay_fd = igt_debugfs_open(RELAY_FILE_NAME, O_RDONLY);
+ igt_assert_f(relay_fd >= 0, "couldn't open the guc log file\n");
+
+ /* Purge the old/boot-time logs from the relay buffer.
+ * This is more for Val team's requirement, where they have to first
+ * purge the existing logs before starting the tests for which the logs
+ * are actually needed. After this logger will enter into a loop and
+ * wait for the new data, at that point benchmark can be launched from
+ * a different shell.
+ */
+ if (discard_oldlogs)
+ pull_leftover_data();
+}
+
+static void open_output_file(void)
+{
+ /* Use Direct IO mode for the output file, as the data written is not
+ * supposed to be accessed again, this saves a copy of data from App's
+ * buffer to kernel buffer (Page cache). Due to no buffering on kernel
+ * side, data is flushed out to disk faster and more buffering can be
+ * done on the logger side to hide the disk IO latency.
+ */
+ outfile_fd = open(out_filename ? : DEFAULT_OUTPUT_FILE_NAME,
+ O_CREAT | O_WRONLY | O_TRUNC | O_DIRECT,
+ 0440);
+ igt_assert_f(outfile_fd >= 0, "couldn't open the output file\n");
+
+ free(out_filename);
+}
+
+static void init_main_thread(void)
+{
+ struct sched_param thread_sched;
+ int ret;
+
+ /* Run the main thread at highest priority to ensure that it always
+ * gets woken-up at earliest on arrival of new data and so is always
+ * ready to pull the logs, otherwise there could be loss logs if
+ * GuC firmware is generating logs at a very high rate.
+ */
+ thread_sched.sched_priority = 1;
+ ret = sched_setscheduler(getpid(), SCHED_FIFO, &thread_sched);
+ igt_assert_f(ret == 0, "couldn't set the priority\n");
+
+ if (signal(SIGINT, int_sig_handler) == SIG_ERR)
+ igt_assert_f(0, "SIGINT handler registration failed\n");
+
+ if (signal(SIGALRM, int_sig_handler) == SIG_ERR)
+ igt_assert_f(0, "SIGALRM handler registration failed\n");
+
+ /* Need an aligned pointer for direct IO */
+ ret = posix_memalign((void **)&read_buffer, PAGE_SIZE, num_buffers * SUBBUF_SIZE);
+ igt_assert_f(ret == 0, "couldn't allocate the read buffer\n");
+
+ /* Keep the pages locked in RAM, avoid page fault overhead */
+ ret = mlock(read_buffer, num_buffers * SUBBUF_SIZE);
+ igt_assert_f(ret == 0, "failed to lock memory\n");
+
+ /* Enable the logging, it may not have been enabled from boot and so
+ * the relay file also wouldn't have been created.
+ */
+ guc_log_control(true);
+
+ open_relay_file();
+ open_output_file();
+}
+
+static int parse_options(int opt, int opt_index, void *data)
+{
+ igt_debug("opt %c optarg %s\n", opt, optarg);
+
+ switch(opt) {
+ case 'v':
+ verbosity_level = atoi(optarg);
+ igt_assert_f(verbosity_level < 0 || verbosity_level > 3, "invalid input for -v option\n");
+ igt_debug("verbosity level to be used is %d\n", verbosity_level);
+ break;
+ case 'o':
+ out_filename = strdup(optarg);
+ igt_assert_f(out_filename, "Couldn't allocate the o/p filename\n");
+ igt_debug("logs to be stored in file %s\n", out_filename);
+ break;
+ case 'b':
+ num_buffers = atoi(optarg);
+ igt_assert_f(num_buffers > 0, "invalid input for -b option\n");
+ igt_debug("number of buffers to be used is %d\n", num_buffers);
+ break;
+ case 't':
+ test_duration = atoi(optarg);
+ igt_assert_f(test_duration > 0, "invalid input for -t option\n");
+ igt_debug("logger to run for %d second\n", test_duration);
+ break;
+ case 'p':
+ poll_timeout = atoi(optarg);
+ igt_assert_f(poll_timeout != 0, "invalid input for -p option\n");
+ if (poll_timeout > 0)
+ igt_debug("polling to be done with %d millisecond timeout\n", poll_timeout);
+ break;
+ case 's':
+ max_filesize = atoi(optarg);
+ igt_assert_f(max_filesize > 0, "invalid input for -s option\n");
+ igt_debug("max allowed size of the output file is %d MB\n", max_filesize);
+ break;
+ case 'd':
+ discard_oldlogs = true;
+ igt_debug("old/boot-time logs will be discarded\n");
+ break;
+ }
+
+ return 0;
+}
+
+static void process_command_line(int argc, char **argv)
+{
+ static struct option long_options[] = {
+ {"verbosity", required_argument, 0, 'v'},
+ {"outputfile", required_argument, 0, 'o'},
+ {"buffers", required_argument, 0, 'b'},
+ {"testduration", required_argument, 0, 't'},
+ {"polltimeout", required_argument, 0, 'p'},
+ {"size", required_argument, 0, 's'},
+ {"discard", no_argument, 0, 'd'},
+ { 0, 0, 0, 0 }
+ };
+
+ const char *help =
+ " -v --verbosity=level verbosity level of GuC logging (0-3)\n"
+ " -o --outputfile=name name of the output file, including the location, where logs will be stored\n"
+ " -b --buffers=num number of buffers to be maintained on logger side for storing logs\n"
+ " -t --testduration=sec max duration in seconds for which the logger should run\n"
+ " -p --polltimeout=ms polling timeout in ms, -1 == indefinite wait for the new data\n"
+ " -s --size=MB max size of output file in MBs after which logging will be stopped\n"
+ " -d --discard discard the old/boot-time logs before entering into the capture loop\n";
+
+ igt_simple_init_parse_opts(&argc, argv, "v:o:b:t:p:s:d", long_options,
+ help, parse_options, NULL);
+}
+
+int main(int argc, char **argv)
+{
+ struct pollfd relay_poll_fd;
+ int nfds;
+ int ret;
+
+ process_command_line(argc, argv);
+
+ init_main_thread();
+
+ /* Use a separate thread for flushing the logs to a file on disk.
+ * Main thread will buffer the data from relay file in its pool of
+ * buffers and other thread will flush the data to disk in background.
+ * This is needed, albeit by default data is written out to disk in
+ * async mode, as when there are too many dirty pages in the RAM,
+ * (/proc/sys/vm/dirty_ratio), kernel starts blocking the processes
+ * doing the file writes.
+ */
+ init_flusher_thread();
+
+ relay_poll_fd.fd = relay_fd;
+ relay_poll_fd.events = POLLIN;
+ relay_poll_fd.revents = 0;
+
+ nfds = 1; /* only one fd to poll */
+
+ alarm(test_duration); /* Start the alarm */
+
+ do {
+ /* Wait/poll for the new data to be available, relay doesn't
+ * provide a blocking read.
+ * On older kernels need to do polling with a timeout instead of
+ * indefinite wait to avoid relying on relay for the wakeup, as
+ * relay used to do the wakeup in a deferred manner on jiffies
+ * granularity by scheduling a timer and moreover that timer was
+ * re-scheduled on every newly produced buffer and so was pushed
+ * out if there were multiple flush interrupts in a very quick
+ * succession (less than a jiffy gap between 2 flush interrupts)
+ * causing relay to run out of sub buffers to store new logs.
+ */
+ ret = poll(&relay_poll_fd, nfds, poll_timeout);
+ if (ret < 0) {
+ if (errno == EINTR)
+ break;
+ igt_assert_f(0, "poll call failed\n");
+ }
+
+ /* No data available yet, poll again, hopefully new data is round the corner */
+ if (!relay_poll_fd.revents)
+ continue;
+
+ pull_data();
+ } while (!stop_logging);
+
+ /* Pause logging on the GuC side */
+ guc_log_control(false);
+
+ /* Signal flusher thread to make an exit */
+ capturing_stopped = 1;
+ pthread_cond_signal(&underflow_cond);
+ pthread_join(flush_thread, NULL);
+
+ pull_leftover_data();
+ igt_info("total bytes written %" PRIu64 "\n", total_bytes_written);
+
+ free(read_buffer);
+ close(relay_fd);
+ close(outfile_fd);
+ igt_exit();
+}
--
1.9.2
More information about the Intel-gfx
mailing list