[Intel-gfx] [PATCH i-g-t] tests/kms_plane_multiple: CRC based atomic correctness test

Maarten Lankhorst maarten.lankhorst at linux.intel.com
Wed Oct 12 12:54:01 UTC 2016


Op 07-10-16 om 13:45 schreef Mika Kahola:
> This is a testcase with multiple planes. The idea here is the following
>
>  - draw a uniform frame with blue color
>  - grab crc for reference
>  - put planes randomly on top with the same blue color
>  - punch holes with black color into the primary framebuffer
>  - ideally the planes should cover these holes so that the output is the
>    identical to reference crc
>  - composite all with one ioctl call
>  - grab crc and verify that the reference crc is equal
>  - repeat this for dozen iterations to maximize coverage
>
> Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> ---
>  tests/Makefile.sources     |   1 +
>  tests/kms_plane_multiple.c | 332 +++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 333 insertions(+)
>  create mode 100644 tests/kms_plane_multiple.c
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index 598ec6f..aed0f3a 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -105,6 +105,7 @@ TESTS_progs_M = \
>  	kms_pipe_color \
>  	kms_pipe_crc_basic \
>  	kms_plane \
> +	kms_plane_multiple \
>  	kms_properties \
>  	kms_psr_sink_crc \
>  	kms_render \
> diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
> new file mode 100644
> index 0000000..153d6d1
> --- /dev/null
> +++ b/tests/kms_plane_multiple.c
> @@ -0,0 +1,332 @@
> +/*
> + * Copyright © 2016 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include "igt.h"
> +#include "drmtest.h"
> +#include <errno.h>
> +#include <stdbool.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <time.h>
> +
> +#define SIZE 128
> +
> +typedef struct {
> +	float red;
> +	float green;
> +	float blue;
> +} color_t;
> +
> +typedef struct {
> +	int drm_fd;
> +	igt_display_t display;
> +	igt_pipe_crc_t *pipe_crc;
> +	igt_plane_t *primary;
> +	igt_plane_t *sprite[IGT_MAX_PLANES-1];
> +	struct igt_fb primary_fb;
> +	struct igt_fb sprite_fb[IGT_MAX_PLANES-1];
Single array, instead of primary/sprite separate? See also below for index change..
> +} data_t;
> +
> +typedef struct {
> +	data_t *data;
> +	igt_crc_t reference_crc;
> +} test_position_t;
> +
> +/*
> + * Common code across all tests, acting on data_t
> + */
> +static void test_init(data_t *data, enum pipe pipe)
> +{
> +	data->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
> +}
> +
> +static void test_fini(data_t *data, igt_output_t *output, int nplanes)
> +{
> +	igt_plane_set_fb(data->primary, NULL);
> +
> +	for (int i = 0; i < nplanes; i++)
> +		igt_plane_set_fb(data->sprite[i], NULL);
> +
> +	/* reset the constraint on the pipe */
> +	igt_output_set_pipe(output, PIPE_ANY);
> +
> +	igt_pipe_crc_free(data->pipe_crc);
> +}
> +
> +static void
> +test_grab_crc(data_t *data, igt_output_t *output, enum pipe pipe,
> +	      color_t *color, uint64_t tiling, int commit,
> +	      igt_crc_t *crc /* out */)
> +{
> +	struct igt_fb fb;
> +	drmModeModeInfo *mode;
> +	igt_plane_t *primary;
> +
> +	igt_output_set_pipe(output, pipe);
> +
> +	primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> +
> +	mode = igt_output_get_mode(output);
> +
> +	igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
> +			    DRM_FORMAT_XRGB8888,
> +			    LOCAL_DRM_FORMAT_MOD_NONE,
> +			    color->red, color->green, color->blue,
> +			    &fb);
> +
> +	igt_plane_set_fb(primary, &fb);
> +
> +	igt_display_commit2(&data->display, commit);
> +
> +	igt_wait_for_vblank(data->drm_fd, pipe);
> +
> +	igt_pipe_crc_collect_crc(data->pipe_crc, crc);
> +
> +	igt_plane_set_fb(primary, NULL);
> +
> +	igt_display_commit2(&data->display, commit);
> +
> +	igt_remove_fb(data->drm_fd, &fb);
> +}
> +
> +/*
> + * Multiple plane position test.
> + *   - We start by grabbing a reference CRC of a full blue fb being scanned
> + *     out on the primary plane
> + *   - Then we scannout number of planes:
> + *      * the primary plane uses a blue fb with a black rectangle hole
> + *      * planes, on top of the primary plane, with a blue fb that is set-up
> + *        to cover the black rectangles of the primary plane fb
> + *     The resulting CRC should be identical to the reference CRC
> + */
> +
> +static void
> +create_fb_for_mode__position(data_t *data, drmModeModeInfo *mode,
> +			     color_t *color, int *rect_x, int *rect_y,
> +			     int rect_w, int rect_h, uint64_t tiling,
> +			     int nplanes)
> +{
> +	unsigned int fb_id;
> +	cairo_t *cr;
> +
> +	fb_id = igt_create_fb(data->drm_fd,
> +			      mode->hdisplay, mode->vdisplay,
> +			      DRM_FORMAT_XRGB8888,
> +			      tiling,
> +			      &data->primary_fb);
> +	igt_assert(fb_id);
> +
> +	cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb);
> +	igt_paint_color(cr, 0, 0, mode->hdisplay, mode->vdisplay,
> +			color->red, color->green, color->blue);
> +
> +	for (int i = 0; i < nplanes; i++)
> +		igt_paint_color(cr, rect_x[i], rect_y[i],
> +				rect_w, rect_h, 0.0, 0.0, 0.0);
> +
> +	igt_assert(cairo_status(cr) == 0);
> +	cairo_destroy(cr);
> +}
> +
> +
> +static void
> +test_planes(data_t *data, enum pipe pipe, color_t *color,
> +	    uint64_t tiling, int nplanes, igt_output_t *output)
> +{
> +	drmModeModeInfo *mode;
> +	int x[IGT_MAX_PLANES-1];
> +	int y[IGT_MAX_PLANES-1];
> +	int plane[IGT_MAX_PLANES-1] = {IGT_PLANE_2,
> +				       IGT_PLANE_3,
> +				       IGT_PLANE_4,
> +				       IGT_PLANE_5,
> +				       IGT_PLANE_6,
> +				       IGT_PLANE_7,
> +				       IGT_PLANE_8,
> +				       IGT_PLANE_9,
> +				       IGT_PLANE_CURSOR};
> +
> +	srand(time(NULL));
> +
> +	igt_output_set_pipe(output, pipe);
> +
> +	mode = igt_output_get_mode(output);
> +
> +	/* sprite planes with random positions */
> +	for (int i = 0; i < nplanes; i++) {
i = IGT_PLANE_2; i < IGT_MAX_PLANES to drop the silly array?
> +		x[i] = rand() % (mode->hdisplay - SIZE);
> +		y[i] = rand() % (mode->vdisplay - SIZE);
> +
> +		data->sprite[i] = igt_output_get_plane(output, plane[i]);
> +
> +		igt_create_color_fb(data->drm_fd,
> +				    SIZE, SIZE, /* width, height */
> +				    data->sprite[i]->is_cursor ? DRM_FORMAT_ARGB8888 : DRM_FORMAT_XRGB8888,
> +				    tiling,
> +				    color->red, color->green, color->blue,
> +				    &data->sprite_fb[i]);
> +
> +		igt_plane_set_position(data->sprite[i], x[i], y[i]);
> +		igt_plane_set_fb(data->sprite[i], &data->sprite_fb[i]);
> +	}
> +
> +	/* primary plane */
> +	data->primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> +	create_fb_for_mode__position(data, mode, color, x, y,
> +				     SIZE, SIZE, tiling, nplanes);
> +	igt_plane_set_fb(data->primary, &data->primary_fb);
> +}
> +
> +static void
> +test_plane_position_with_output(int n, int iterations, data_t *data,
> +				enum pipe pipe,
> +				igt_output_t *output,
> +				int nplanes, uint64_t tiling,
> +				int commit)
> +{
> +	test_position_t test = { .data = data };
> +	igt_crc_t crc;
> +	color_t blue  = { 0.0f, 0.0f, 1.0f };
> +
> +	igt_skip_on(pipe >= data->display.n_pipes);
> +	igt_skip_on(nplanes >= data->display.pipes[pipe].n_planes);
> +
> +	igt_info("%d/%d: Testing connector %s using pipe %s with %d planes\n",
> +		 n, iterations, igt_output_name(output), kmstest_pipe_name(pipe),
> +		 nplanes);
> +
> +	test_init(data, pipe);
> +
> +	test_grab_crc(data, output, pipe, &blue, tiling, commit, &test.reference_crc);
> +
> +	test_planes(data, pipe, &blue, tiling, nplanes, output);
> +
> +	igt_display_commit2(&data->display, commit);
> +
> +	igt_pipe_crc_collect_crc(data->pipe_crc, &crc);
For atomic, I would count vblank numbers too. This would mean not using igt_pipe_crc_collect_crc, instead use
igt_pipe_crc_get_crcs + start/stop.

In case of atomic, I would only warn if more than 1 vblank passed, on ilk and chv/vlv platforms we may have to wait a extra vblank.
> +	igt_wait_for_vblank(data->drm_fd, pipe);
For atomic, you'd want to pass DRM_MODE_PAGE_FLIP_EVENT and wait on the fd.
> +	igt_assert_crc_equal(&test.reference_crc, &crc);
> +
> +	test_fini(data, output, nplanes);
> +}
> +
> +static void
> +test_plane_position(data_t *data, enum pipe pipe, int nplanes,
> +		    uint64_t tiling, int commit)
> +{
> +	igt_output_t *output;
> +	int connected_outs;
> +	int i;
> +	int iterations = 12;

The test would run a lot faster if you move iterations to after the modeset,
so instead of DP1 then DP2, then DP1 again, you would run a test on DP1 12
times, then DP2. It saves ~22 modesets -> 11 seconds per test.

> +	igt_info("running test for dozen iterations\n");
> +	for (i = 0; i < iterations; i++) {
> +		connected_outs = 0;
> +		for_each_connected_output(&data->display, output) {
> +			test_plane_position_with_output(i+1, iterations, data,
> +							pipe, output, nplanes,
> +							tiling, commit);
> +			connected_outs++;
> +		}
> +
> +		igt_skip_on(connected_outs == 0);
> +	}
> +}
> +
> +static void
> +run_tests_for_pipe_plane(data_t *data, enum pipe pipe, int nplanes)
> +{
> +	igt_subtest_f("legacy-pipe-%s-tiling-none-planes-%d",
> +		      kmstest_pipe_name(pipe), nplanes)
> +		test_plane_position(data, pipe, nplanes,
> +				    LOCAL_DRM_FORMAT_MOD_NONE, COMMIT_LEGACY);
> +
> +	igt_subtest_f("atomic-pipe-%s-tiling-none-planes-%d",
> +		      kmstest_pipe_name(pipe), nplanes)
> +		test_plane_position(data, pipe, nplanes,
> +				    LOCAL_I915_FORMAT_MOD_X_TILED, COMMIT_ATOMIC);
> +
> +	igt_subtest_f("legacy-pipe-%s-tiling-x-planes-%d",
> +		      kmstest_pipe_name(pipe), nplanes)
> +		test_plane_position(data, pipe, nplanes,
> +				    LOCAL_I915_FORMAT_MOD_X_TILED, COMMIT_LEGACY);
> +
> +	igt_subtest_f("atomic-pipe-%s-tiling-x-planes-%d",
> +		      kmstest_pipe_name(pipe), nplanes)
> +		test_plane_position(data, pipe, nplanes,
> +				    LOCAL_I915_FORMAT_MOD_X_TILED, COMMIT_ATOMIC);
> +
> +	igt_subtest_f("legacy-pipe-%s-tiling-y-planes-%d",
> +		      kmstest_pipe_name(pipe), nplanes)
> +		test_plane_position(data, pipe, nplanes,
> +				    LOCAL_I915_FORMAT_MOD_Y_TILED, COMMIT_LEGACY);
> +
> +	igt_subtest_f("atomic-pipe-%s-tiling-y-planes-%d",
> +		      kmstest_pipe_name(pipe), nplanes)
> +		test_plane_position(data, pipe, nplanes,
> +				    LOCAL_I915_FORMAT_MOD_Y_TILED, COMMIT_ATOMIC);
> +
> +	igt_subtest_f("legacy-pipe-%s-tiling-yf-planes-%d",
> +		      kmstest_pipe_name(pipe), nplanes)
> +		test_plane_position(data, pipe, nplanes,
> +				    LOCAL_I915_FORMAT_MOD_Yf_TILED, COMMIT_LEGACY);
> +
> +	igt_subtest_f("atomic-pipe-%s-tiling-yf-planes-%d",
> +		      kmstest_pipe_name(pipe), nplanes)
> +		test_plane_position(data, pipe, nplanes,
> +				    LOCAL_I915_FORMAT_MOD_Yf_TILED, COMMIT_ATOMIC);
> +}
> +
> +static void
> +run_tests_for_pipe(data_t *data, enum pipe pipe)
> +{
> +	for (int nplanes = 1; nplanes < IGT_MAX_PLANES - 1; nplanes++)
> +		run_tests_for_pipe_plane(data, pipe, nplanes);
> +}
> +
> +static data_t data;
> +
> +igt_main
> +{
> +
> +	igt_skip_on_simulation();
> +
> +	igt_fixture {
> +		data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
> +
> +		kmstest_set_vt_graphics_mode();
> +
> +		igt_require_pipe_crc();
> +		igt_display_init(&data.display, data.drm_fd);
> +	}
> +
> +	for (int pipe = 0; pipe < I915_MAX_PIPES; pipe++)
> +		run_tests_for_pipe(&data, pipe);
> +
> +	igt_fixture {
> +		igt_display_fini(&data.display);
> +	}
> +}




More information about the Intel-gfx mailing list