[Intel-gfx] [PATCH 1/8] drm/i915/skl+: Prepare for removing data rate from skl watermark state
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Wed Oct 12 13:28:14 UTC 2016
Caching is not required, drm_atomic_crtc_state_for_each_plane_state
can be used to inspect all plane_states that are assigned to the
current crtc_state, so we can just recalculate every time.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 6af1587e9d84..b96a899c899d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -31,6 +31,7 @@
#include "intel_drv.h"
#include "../../../platform/x86/intel_ips.h"
#include <linux/module.h>
+#include <drm/drm_atomic_helper.h>
/**
* DOC: RC6
@@ -3242,18 +3243,17 @@ skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate)
struct drm_crtc *crtc = cstate->crtc;
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- const struct drm_plane *plane;
+ struct drm_plane *plane;
const struct intel_plane *intel_plane;
- struct drm_plane_state *pstate;
+ const struct drm_plane_state *pstate;
unsigned int rate, total_data_rate = 0;
int id;
- int i;
if (WARN_ON(!state))
return 0;
/* Calculate and cache data rate for each plane */
- for_each_plane_in_state(state, plane, pstate, i) {
+ drm_atomic_crtc_state_for_each_plane_state(plane, pstate, cstate) {
id = skl_wm_plane_id(to_intel_plane(plane));
intel_plane = to_intel_plane(plane);
@@ -3356,7 +3356,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane;
struct drm_plane *plane;
- struct drm_plane_state *pstate;
+ const struct drm_plane_state *pstate;
enum pipe pipe = intel_crtc->pipe;
struct skl_ddb_entry *alloc = &cstate->wm.skl.ddb;
uint16_t alloc_size, start, cursor_blocks;
@@ -3392,14 +3392,14 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
alloc_size -= cursor_blocks;
/* 1. Allocate the mininum required blocks for each active plane */
- for_each_plane_in_state(state, plane, pstate, i) {
+ drm_atomic_crtc_state_for_each_plane_state(plane, pstate, &cstate->base) {
intel_plane = to_intel_plane(plane);
id = skl_wm_plane_id(intel_plane);
if (intel_plane->pipe != pipe)
continue;
- if (!to_intel_plane_state(pstate)->base.visible) {
+ if (!pstate->visible) {
minimum[id] = 0;
y_minimum[id] = 0;
continue;
@@ -3948,7 +3948,7 @@ skl_ddb_add_affected_planes(struct intel_crtc_state *cstate)
WARN_ON(!drm_atomic_get_existing_crtc_state(state, crtc));
- drm_for_each_plane_mask(plane, dev, crtc->state->plane_mask) {
+ drm_for_each_plane_mask(plane, dev, cstate->base.plane_mask) {
id = skl_wm_plane_id(to_intel_plane(plane));
if (skl_ddb_entry_equal(&cur_ddb->plane[pipe][id],
@@ -4063,14 +4063,12 @@ skl_print_wm_changes(const struct drm_atomic_state *state)
to_intel_atomic_state(state);
const struct drm_crtc *crtc;
const struct drm_crtc_state *cstate;
- const struct drm_plane *plane;
const struct intel_plane *intel_plane;
- const struct drm_plane_state *pstate;
const struct skl_ddb_allocation *old_ddb = &dev_priv->wm.skl_hw.ddb;
const struct skl_ddb_allocation *new_ddb = &intel_state->wm_results.ddb;
enum pipe pipe;
int id;
- int i, j;
+ int i;
for_each_crtc_in_state(state, crtc, cstate, i) {
if (!crtc->state)
@@ -4078,10 +4076,9 @@ skl_print_wm_changes(const struct drm_atomic_state *state)
pipe = to_intel_crtc(crtc)->pipe;
- for_each_plane_in_state(state, plane, pstate, j) {
+ for_each_intel_plane_on_crtc(dev, to_intel_crtc(crtc), intel_plane) {
const struct skl_ddb_entry *old, *new;
- intel_plane = to_intel_plane(plane);
id = skl_wm_plane_id(intel_plane);
old = &old_ddb->plane[pipe][id];
new = &new_ddb->plane[pipe][id];
@@ -4094,13 +4091,13 @@ skl_print_wm_changes(const struct drm_atomic_state *state)
if (id != PLANE_CURSOR) {
DRM_DEBUG_ATOMIC("[PLANE:%d:plane %d%c] ddb (%d - %d) -> (%d - %d)\n",
- plane->base.id, id + 1,
+ intel_plane->base.base.id, id + 1,
pipe_name(pipe),
old->start, old->end,
new->start, new->end);
} else {
DRM_DEBUG_ATOMIC("[PLANE:%d:cursor %c] ddb (%d - %d) -> (%d - %d)\n",
- plane->base.id,
+ intel_plane->base.base.id,
pipe_name(pipe),
old->start, old->end,
new->start, new->end);
--
2.7.4
More information about the Intel-gfx
mailing list