[Intel-gfx] [PATCH 2/8] drm/i915/skl+: Remove data_rate from watermark struct.

[Maarten Lankhorst]

It's only used in one function, and can be calculated without caching it
in the global struct by using drm_atomic_crtc_state_for_each_plane_state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h |  4 ----
 drivers/gpu/drm/i915/intel_pm.c  | 44 +++++++++++++++++++---------------------
 2 files changed, 21 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index bb468c974e14..888054518f3c 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -502,10 +502,6 @@ struct intel_crtc_wm_state {
 			struct skl_pipe_wm optimal;
 			struct skl_ddb_entry ddb;
 
-			/* cached plane data rate */
-			unsigned plane_data_rate[I915_MAX_PLANES];
-			unsigned plane_y_data_rate[I915_MAX_PLANES];
-
 			/* minimum block allocation */
 			uint16_t minimum_blocks[I915_MAX_PLANES];
 			uint16_t minimum_y_blocks[I915_MAX_PLANES];
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index b96a899c899d..97b6202c4097 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3236,12 +3236,13 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
  *   3 * 4096 * 8192  * 4 < 2^32
  */
 static unsigned int
-skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate)
+skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate,
+				 unsigned *plane_data_rate,
+				 unsigned *plane_y_data_rate)
 {
 	struct drm_crtc_state *cstate = &intel_cstate->base;
 	struct drm_atomic_state *state = cstate->state;
 	struct drm_crtc *crtc = cstate->crtc;
-	struct drm_device *dev = crtc->dev;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_plane *plane;
 	const struct intel_plane *intel_plane;
@@ -3263,21 +3264,16 @@ skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate)
 		/* packed/uv */
 		rate = skl_plane_relative_data_rate(intel_cstate,
 						    pstate, 0);
-		intel_cstate->wm.skl.plane_data_rate[id] = rate;
+		plane_data_rate[id] = rate;
+
+		total_data_rate += rate;
 
 		/* y-plane */
 		rate = skl_plane_relative_data_rate(intel_cstate,
 						    pstate, 1);
-		intel_cstate->wm.skl.plane_y_data_rate[id] = rate;
-	}
-
-	/* Calculate CRTC's total data rate from cached values */
-	for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
-		int id = skl_wm_plane_id(intel_plane);
+		plane_y_data_rate[id] = rate;
 
-		/* packed/uv */
-		total_data_rate += intel_cstate->wm.skl.plane_data_rate[id];
-		total_data_rate += intel_cstate->wm.skl.plane_y_data_rate[id];
+		total_data_rate += rate;
 	}
 
 	return total_data_rate;
@@ -3366,6 +3362,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
 	int num_active;
 	int id, i;
 
+	unsigned data_rate[I915_MAX_PLANES] = {};
+	unsigned y_data_rate[I915_MAX_PLANES] = {};
+
 	/* Clear the partitioning for disabled planes. */
 	memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe]));
 	memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe]));
@@ -3425,29 +3424,28 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
 	 *
 	 * FIXME: we may not allocate every single block here.
 	 */
-	total_data_rate = skl_get_total_relative_data_rate(cstate);
+	total_data_rate = skl_get_total_relative_data_rate(cstate, data_rate, y_data_rate);
 	if (total_data_rate == 0)
 		return 0;
 
 	start = alloc->start;
-	for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
-		unsigned int data_rate, y_data_rate;
+	for (id = 0; id < I915_MAX_PLANES; id++) {
+		unsigned rate;
 		uint16_t plane_blocks, y_plane_blocks = 0;
-		int id = skl_wm_plane_id(intel_plane);
 
-		data_rate = cstate->wm.skl.plane_data_rate[id];
+		rate = data_rate[id];
 
 		/*
 		 * allocation for (packed formats) or (uv-plane part of planar format):
 		 * promote the expression to 64 bits to avoid overflowing, the
-		 * result is < available as data_rate / total_data_rate < 1
+		 * result is < available as rate / total_data_rate < 1
 		 */
 		plane_blocks = minimum[id];
-		plane_blocks += div_u64((uint64_t)alloc_size * data_rate,
+		plane_blocks += div_u64((uint64_t)alloc_size * rate,
 					total_data_rate);
 
 		/* Leave disabled planes at (0,0) */
-		if (data_rate) {
+		if (rate) {
 			ddb->plane[pipe][id].start = start;
 			ddb->plane[pipe][id].end = start + plane_blocks;
 		}
@@ -3457,13 +3455,13 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
 		/*
 		 * allocation for y_plane part of planar format:
 		 */
-		y_data_rate = cstate->wm.skl.plane_y_data_rate[id];
+		rate = y_data_rate[id];
 
 		y_plane_blocks = y_minimum[id];
-		y_plane_blocks += div_u64((uint64_t)alloc_size * y_data_rate,
+		y_plane_blocks += div_u64((uint64_t)alloc_size * rate,
 					total_data_rate);
 
-		if (y_data_rate) {
+		if (rate) {
 			ddb->y_plane[pipe][id].start = start;
 			ddb->y_plane[pipe][id].end = start + y_plane_blocks;
 		}
-- 
2.7.4