[Intel-gfx] [RFC PATCH v2 7/8] hdmi_audio: Fixup some monitor

[Jerome Anand]

I think this change was given to us, and they claimed it fixed an issue
on some monitor brand. I'm not sure what this patch actually does.

Signed-off-by: David Henningsson <david.henningsson at canonical.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand at intel.com>
---
 sound/x86/intel_hdmi_audio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c
index 0802b29..7fd90ff 100644
--- a/sound/x86/intel_hdmi_audio.c
+++ b/sound/x86/intel_hdmi_audio.c
@@ -337,6 +337,7 @@ static void snd_intelhad_reset_audio_v2(u8 reset)
 static int had_prog_status_reg(struct snd_pcm_substream *substream,
 			struct snd_intelhad *intelhaddata)
 {
+	union aud_cfg cfg_val = {.cfg_regval = 0};
 	union aud_ch_status_0 ch_stat0 = {.status_0_regval = 0};
 	union aud_ch_status_1 ch_stat1 = {.status_1_regval = 0};
 	int format;
@@ -347,6 +348,7 @@ static int had_prog_status_reg(struct snd_pcm_substream *substream,
 						IEC958_AES0_NONAUDIO)>>1;
 	ch_stat0.status_0_regx.clk_acc = (intelhaddata->aes_bits &
 						IEC958_AES3_CON_CLOCK)>>4;
+	cfg_val.cfg_regx.val_bit = ch_stat0.status_0_regx.lpcm_id;
 
 	switch (substream->runtime->rate) {
 	case AUD_SAMPLE_RATE_32:
@@ -426,7 +428,6 @@ int snd_intelhad_prog_audio_ctrl_v2(struct snd_pcm_substream *substream,
 	else
 		cfg_val.cfg_regx_v2.layout = LAYOUT1;
 
-	cfg_val.cfg_regx_v2.val_bit = 1;
 	had_write_register(AUD_CONFIG, cfg_val.cfg_regval);
 	return 0;
 }
@@ -482,7 +483,6 @@ int snd_intelhad_prog_audio_ctrl_v1(struct snd_pcm_substream *substream,
 
 	}
 
-	cfg_val.cfg_regx.val_bit = 1;
 	had_write_register(AUD_CONFIG, cfg_val.cfg_regval);
 	return 0;
 }
-- 
2.9.3