[Intel-gfx] [PATCH 1/2] drm/i915/gen9: fix watermarks when using the pipe scaler

[Matt Roper]

On Fri, Oct 07, 2016 at 05:28:57PM -0300, Paulo Zanoni wrote:
> Luckily, the necessary adjustments for when we're using the scaler are
> exactly the same as the ones needed on ILK+, so just reuse the
> function we already have.
> 
> v2: Invert the patch order so stable backports get easier.
> 
> Cc: stable at vger.kernel.org
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>

I thought there was a patch floating around to fix this back before I
went on break a couple months ago, but I can't find it now, so this
looks good.

For both patches:

Reviewed-by: Matt Roper <matthew.d.roper at intel.com>

> ---
>  drivers/gpu/drm/i915/intel_pm.c | 12 +++---------
>  1 file changed, 3 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index fe6c1c6..000b033 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3470,12 +3470,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
>  	return 0;
>  }
>  
> -static uint32_t skl_pipe_pixel_rate(const struct intel_crtc_state *config)
> -{
> -	/* TODO: Take into account the scalers once we support them */
> -	return config->base.adjusted_mode.crtc_clock;
> -}
> -
>  /*
>   * The max latency should be 257 (max the punit can code is 255 and we add 2us
>   * for the read latency) and cpp should always be <= 8, so that
> @@ -3526,7 +3520,7 @@ static uint32_t skl_adjusted_plane_pixel_rate(const struct intel_crtc_state *cst
>  	 * Adjusted plane pixel rate is just the pipe's adjusted pixel rate
>  	 * with additional adjustments for plane-specific scaling.
>  	 */
> -	adjusted_pixel_rate = skl_pipe_pixel_rate(cstate);
> +	adjusted_pixel_rate = ilk_pipe_pixel_rate(cstate);
>  	downscale_amount = skl_plane_downscale_amount(pstate);
>  
>  	pixel_rate = adjusted_pixel_rate * downscale_amount >> 16;
> @@ -3742,11 +3736,11 @@ skl_compute_linetime_wm(struct intel_crtc_state *cstate)
>  	if (!cstate->base.active)
>  		return 0;
>  
> -	if (WARN_ON(skl_pipe_pixel_rate(cstate) == 0))
> +	if (WARN_ON(ilk_pipe_pixel_rate(cstate) == 0))
>  		return 0;
>  
>  	return DIV_ROUND_UP(8 * cstate->base.adjusted_mode.crtc_htotal * 1000,
> -			    skl_pipe_pixel_rate(cstate));
> +			    ilk_pipe_pixel_rate(cstate));
>  }
>  
>  static void skl_compute_transition_wm(struct intel_crtc_state *cstate,
> -- 
> 2.7.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795