[Intel-gfx] [PATCH v2 3/6] drm: RIP mode_config->rotation_property
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Fri Oct 21 19:22:45 UTC 2016
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Now that all drivers have been converted over to the per-plane rotation
property, we can just nuke the global rotation property.
v2: Rebase due to BIT(),__builtin_ffs() & co.
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
---
drivers/gpu/drm/drm_atomic.c | 6 ++----
drivers/gpu/drm/drm_blend.c | 32 ++++----------------------------
drivers/gpu/drm/drm_fb_helper.c | 7 +------
include/drm/drm_blend.h | 2 --
include/drm/drm_crtc.h | 5 -----
5 files changed, 7 insertions(+), 45 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index f81706387889..1b5a32df9a9a 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -705,8 +705,7 @@ int drm_atomic_plane_set_property(struct drm_plane *plane,
state->src_w = val;
} else if (property == config->prop_src_h) {
state->src_h = val;
- } else if (property == config->rotation_property ||
- property == plane->rotation_property) {
+ } else if (property == plane->rotation_property) {
if (!is_power_of_2(val & DRM_ROTATE_MASK))
return -EINVAL;
state->rotation = val;
@@ -766,8 +765,7 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
*val = state->src_w;
} else if (property == config->prop_src_h) {
*val = state->src_h;
- } else if (property == config->rotation_property ||
- property == plane->rotation_property) {
+ } else if (property == plane->rotation_property) {
*val = state->rotation;
} else if (property == plane->zpos_property) {
*val = state->zpos;
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index e52aece30900..1f2412c7ccfd 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -89,7 +89,7 @@
* On top of this basic transformation additional properties can be exposed by
* the driver:
*
- * - Rotation is set up with drm_mode_create_rotation_property(). It adds a
+ * - Rotation is set up with drm_plane_create_rotation_property(). It adds a
* rotation and reflection step between the source and destination rectangles.
* Without this property the rectangle is only scaled, but not rotated or
* reflected.
@@ -105,18 +105,12 @@
*/
/**
- * drm_mode_create_rotation_property - create a new rotation property
- * @dev: DRM device
+ * drm_plane_create_rotation_property - create a new rotation property
+ * @plane: drm plane
+ * @rotation: initial value of the rotation property
* @supported_rotations: bitmask of supported rotations and reflections
*
* This creates a new property with the selected support for transformations.
- * The resulting property should be stored in @rotation_property in
- * &drm_mode_config. It then must be attached to each plane which supports
- * rotations using drm_object_attach_property().
- *
- * FIXME: Probably better if the rotation property is created on each plane,
- * like the zpos property. Otherwise it's not possible to allow different
- * rotation modes on different planes.
*
* Since a rotation by 180° degress is the same as reflecting both along the x
* and the y axis the rotation property is somewhat redundant. Drivers can use
@@ -144,24 +138,6 @@
* rotation. After reflection, the rotation is applied to the image sampled from
* the source rectangle, before scaling it to fit the destination rectangle.
*/
-struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
- unsigned int supported_rotations)
-{
- static const struct drm_prop_enum_list props[] = {
- { __builtin_ffs(DRM_ROTATE_0) - 1, "rotate-0" },
- { __builtin_ffs(DRM_ROTATE_90) - 1, "rotate-90" },
- { __builtin_ffs(DRM_ROTATE_180) - 1, "rotate-180" },
- { __builtin_ffs(DRM_ROTATE_270) - 1, "rotate-270" },
- { __builtin_ffs(DRM_REFLECT_X) - 1, "reflect-x" },
- { __builtin_ffs(DRM_REFLECT_Y) - 1, "reflect-y" },
- };
-
- return drm_property_create_bitmask(dev, 0, "rotation",
- props, ARRAY_SIZE(props),
- supported_rotations);
-}
-EXPORT_SYMBOL(drm_mode_create_rotation_property);
-
int drm_plane_create_rotation_property(struct drm_plane *plane,
unsigned int rotation,
unsigned int supported_rotations)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index e0d428f9d1cb..83dbae0fabcf 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -392,15 +392,10 @@ static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
if (plane->type != DRM_PLANE_TYPE_PRIMARY)
drm_plane_force_disable(plane);
- if (plane->rotation_property) {
+ if (plane->rotation_property)
drm_mode_plane_set_obj_prop(plane,
plane->rotation_property,
DRM_ROTATE_0);
- } else if (dev->mode_config.rotation_property) {
- drm_mode_plane_set_obj_prop(plane,
- dev->mode_config.rotation_property,
- DRM_ROTATE_0);
- }
}
for (i = 0; i < fb_helper->crtc_count; i++) {
diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
index fd351924e1c5..13221cf9b3eb 100644
--- a/include/drm/drm_blend.h
+++ b/include/drm/drm_blend.h
@@ -52,8 +52,6 @@ static inline bool drm_rotation_90_or_270(unsigned int rotation)
return rotation & (DRM_ROTATE_90 | DRM_ROTATE_270);
}
-struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
- unsigned int supported_rotations);
int drm_plane_create_rotation_property(struct drm_plane *plane,
unsigned int rotation,
unsigned int supported_rotations);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 284c1b3aec10..bc860cfc67ca 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1156,11 +1156,6 @@ struct drm_mode_config {
*/
struct drm_property *plane_type_property;
/**
- * @rotation_property: Optional property for planes or CRTCs to specifiy
- * rotation.
- */
- struct drm_property *rotation_property;
- /**
* @prop_src_x: Default atomic plane property for the plane source
* position in the connected &drm_framebuffer.
*/
--
2.7.4
More information about the Intel-gfx
mailing list