[Intel-gfx] ✗ Fi.CI.BAT: warning for drm/i915/lspcon: Work around resume failure

[Imre Deak]

On ma, 2016-10-24 at 17:16 +0000, Patchwork wrote:
> == Series Details ==
> 
> Series: drm/i915/lspcon: Work around resume failure
> URL   : https://patchwork.freedesktop.org/series/14280/
> State : warning
> 
> == Summary ==
> 
> Series 14280v1 drm/i915/lspcon: Work around resume failure
> https://patchwork.freedesktop.org/api/1.0/series/14280/revisions/1/mb
> ox/
> 
> Test drv_module_reload_basic:
>                 pass       -> DMESG-WARN (fi-skl-6700hq)

This one is a result of the previous CI run where LSPCON failed after
S3. After a warm-reboot LSPCON is still in a broken state, and even the
initial LSPCON probe will fail.

A power cycle between CI runs would prevent the above.

> Test gem_exec_suspend:
>         Subgroup basic-s3:
>                 dmesg-warn -> PASS       (fi-skl-6700hq)
> Test kms_pipe_crc_basic:
>         Subgroup suspend-read-crc-pipe-a:
>                 dmesg-warn -> PASS       (fi-skl-6700hq)
>         Subgroup suspend-read-crc-pipe-b:
>                 dmesg-warn -> PASS       (fi-skl-6700hq)
>         Subgroup suspend-read-crc-pipe-c:
>                 dmesg-warn -> PASS       (fi-skl-6700hq)
> 
> fi-bdw-
> 5557u     total:246  pass:231  dwarn:0   dfail:0   fail:0   skip:15 
> fi-bsw-
> n3050     total:246  pass:204  dwarn:0   dfail:0   fail:0   skip:42 
> fi-bxt-
> t5700     total:246  pass:216  dwarn:0   dfail:0   fail:0   skip:30 
> fi-byt-
> j1900     total:246  pass:215  dwarn:0   dfail:0   fail:0   skip:31 
> fi-byt-
> n2820     total:246  pass:211  dwarn:0   dfail:0   fail:0   skip:35 
> fi-hsw-
> 4770      total:246  pass:224  dwarn:0   dfail:0   fail:0   skip:22 
> fi-hsw-
> 4770r     total:246  pass:224  dwarn:0   dfail:0   fail:0   skip:22 
> fi-ilk-
> 650       total:246  pass:185  dwarn:0   dfail:0   fail:1   skip:60 
> fi-ivb-
> 3520m     total:246  pass:221  dwarn:0   dfail:0   fail:0   skip:25 
> fi-ivb-
> 3770      total:246  pass:221  dwarn:0   dfail:0   fail:0   skip:25 
> fi-skl-
> 6260u     total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
> fi-skl-
> 6700hq    total:246  pass:222  dwarn:1   dfail:0   fail:0   skip:23 
> fi-skl-
> 6700k     total:246  pass:222  dwarn:1   dfail:0   fail:0   skip:23 
> fi-skl-
> 6770hq    total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
> fi-snb-
> 2520m     total:246  pass:210  dwarn:0   dfail:0   fail:0   skip:36 
> fi-snb-
> 2600      total:246  pass:209  dwarn:0   dfail:0   fail:0   skip:37 
> 
> Results at /Patchwork_2801/
> 
> 102441087e47f4892b88c4f6e308e3edf89eeda1 drm-intel-nightly: 2016y-
> 10m-24d-14h-28m-17s UTC integration manifest
> eaa672c drm/i915/lspcon: Add workaround for resuming in PCON mode
> eb04604 drm/i915/lspcon: Get DDC adapter via container_of() instead
> of cached ptr
> 0ca993d drm/i915/dp: Read DP descriptor for eDP and LSPCON too
> 0144d102 drm/i915/lspcon: Fail LSPCON probe if the start of DPCD
> can't be read
> 7568e07 drm/i915/dp: Print full branch/sink descriptor
> 3b4f6e9 drm/i915/dp: Print only sink or branch specific OUI based on
> dev type
> b1439bc drm/i915/dp: Remove debug dependency of DPCD SW/HW revision
> read
> 2beca1a drm/dp: Factor out helper to distinguish between branch and
> sink devices
>