[Intel-gfx] [PATCH v2 1/9] drm/i915/skl: pass pipe_wm in skl_compute_(wm_level/plane_wm) functions

Kumar, Mahesh mahesh1.kumar at intel.com
Thu Sep 8 11:26:26 UTC 2016


From: Mahesh Kumar <mahesh1.kumar at intel.com>

This patch make use of plane_wm variable directly instead of passing
skl_plane_wm struct. this way reduces number of argument requirement
in watermark calculation functions.

It also gives more freedom of decision making to implement Bspec WM
workarounds.

Signed-off-by: Mahesh Kumar <mahesh1.kumar at intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 86c6d66..3fdec4d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3542,9 +3542,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 				struct intel_plane_state *intel_pstate,
 				uint16_t ddb_allocation,
 				int level,
-				uint16_t *out_blocks, /* out */
-				uint8_t *out_lines, /* out */
-				bool *enabled /* out */)
+				struct skl_pipe_wm *pipe_wm)
 {
 	struct drm_plane_state *pstate = &intel_pstate->base;
 	struct drm_framebuffer *fb = pstate->fb;
@@ -3557,6 +3555,11 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	uint32_t width = 0, height = 0;
 	uint32_t plane_pixel_rate;
 	uint32_t y_tile_minimum, y_min_scanlines;
+	int id = skl_wm_plane_id(to_intel_plane(pstate->plane));
+	struct skl_wm_level *result = &pipe_wm->wm[level];
+	uint16_t *out_blocks = &result->plane_res_b[id];
+	uint8_t *out_lines = &result->plane_res_l[id];
+	bool *enabled = &result->plane_en[id];
 
 	if (latency == 0 || !cstate->base.active || !intel_pstate->base.visible) {
 		*enabled = false;
@@ -3673,7 +3676,7 @@ skl_compute_wm_level(const struct drm_i915_private *dev_priv,
 		     struct skl_ddb_allocation *ddb,
 		     struct intel_crtc_state *cstate,
 		     int level,
-		     struct skl_wm_level *result)
+		     struct skl_pipe_wm *pipe_wm)
 {
 	struct drm_atomic_state *state = cstate->base.state;
 	struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
@@ -3684,12 +3687,6 @@ skl_compute_wm_level(const struct drm_i915_private *dev_priv,
 	enum pipe pipe = intel_crtc->pipe;
 	int ret;
 
-	/*
-	 * We'll only calculate watermarks for planes that are actually
-	 * enabled, so make sure all other planes are set as disabled.
-	 */
-	memset(result, 0, sizeof(*result));
-
 	for_each_intel_plane_mask(&dev_priv->drm,
 				  intel_plane,
 				  cstate->base.plane_mask) {
@@ -3727,9 +3724,7 @@ skl_compute_wm_level(const struct drm_i915_private *dev_priv,
 					   intel_pstate,
 					   ddb_blocks,
 					   level,
-					   &result->plane_res_b[i],
-					   &result->plane_res_l[i],
-					   &result->plane_en[i]);
+					   pipe_wm);
 		if (ret)
 			return ret;
 	}
@@ -3777,9 +3772,15 @@ static int skl_build_pipe_wm(struct intel_crtc_state *cstate,
 	int level, max_level = ilk_wm_max_level(dev);
 	int ret;
 
+	/*
+	 * We'll only calculate watermarks for planes that are actually
+	 * enabled, so make sure all other planes are set as disabled.
+	 */
+	memset(pipe_wm, 0, sizeof(*pipe_wm));
+
 	for (level = 0; level <= max_level; level++) {
 		ret = skl_compute_wm_level(dev_priv, ddb, cstate,
-					   level, &pipe_wm->wm[level]);
+					   level, pipe_wm);
 		if (ret)
 			return ret;
 	}
-- 
2.8.3



More information about the Intel-gfx mailing list