[Intel-gfx] [PATCH v2 9/9] drm/i915/bxt: Implement Transition WM
Kumar, Mahesh
mahesh1.kumar at intel.com
Thu Sep 8 11:26:34 UTC 2016
From: Mahesh Kumar <mahesh1.kumar at intel.com>
This patch enables Transition WM for SKL+ platforms.
Transition WM are used if IPC is enabled, to decide, number of blocks
to be fetched before reducing the priority of display to fetch from
memory.
Changes since v1:
- Don't enable transition WM for GEN9 (Art/Paulo)
- Rebase to use fixed point 16.16 calculation
- Fix the use of selected result from latency level-0
Signed-off-by: Mahesh Kumar <mahesh1.kumar at intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 60 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 8d0037c..f6a3fab 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2862,6 +2862,8 @@ bool ilk_disable_lp_wm(struct drm_device *dev)
#define SKL_DDB_SIZE 896 /* in blocks */
#define BXT_DDB_SIZE 512
+#define SKL_TRANS_WM_AMOUNT 10 /* tunable value */
+#define SKL_TRANS_WM_MIN 14
#define SKL_SAGV_BLOCK_TIME 30 /* µs */
/*
@@ -3583,6 +3585,48 @@ static uint32_t skl_adjusted_plane_pixel_rate(const struct intel_crtc_state *cst
return pixel_rate;
}
+static void skl_compute_plane_trans_wm(const struct drm_i915_private *dev_priv,
+ struct skl_pipe_wm *pipe_wm,
+ struct intel_plane_state *intel_pstate,
+ uint32_t selected_result,
+ uint32_t y_tile_min,
+ bool y_tile)
+{
+ struct drm_plane_state *pstate = &intel_pstate->base;
+ int id = skl_wm_plane_id(to_intel_plane(pstate->plane));
+ uint16_t *out_blocks = &pipe_wm->trans_wm.plane_res_b[id];
+ uint8_t *out_lines = &pipe_wm->trans_wm.plane_res_l[id];
+ uint32_t trans_min = 0, trans_offset_blocks;
+ uint32_t trans_y_tile_min = 0, res_blocks = 0;
+ uint16_t trans_res_blocks = 0;
+
+ /* Keep Trans WM disabled for GEN9 */
+ if (IS_GEN9(dev_priv))
+ goto exit;
+
+ trans_min = SKL_TRANS_WM_MIN;
+
+ trans_offset_blocks = (trans_min + SKL_TRANS_WM_AMOUNT) << 16;
+
+ if (y_tile) {
+ trans_y_tile_min = 2 * y_tile_min;
+ res_blocks = max(trans_y_tile_min, selected_result) +
+ trans_offset_blocks;
+ } else {
+ res_blocks = selected_result + trans_offset_blocks;
+ }
+
+ trans_res_blocks = DIV_ROUND_UP(res_blocks, 1 << 16) + 1;
+
+ /* WA BUG:1938466 add one block for non y-tile planes */
+ if (!y_tile)
+ trans_res_blocks += 1;
+exit:
+ *out_blocks = trans_res_blocks;
+ *out_lines = 0;
+}
+
+
static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
struct intel_crtc_state *cstate,
struct intel_plane_state *intel_pstate,
@@ -3709,6 +3753,9 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
*out_blocks = res_blocks;
*out_lines = res_lines;
+ if (level == 0)
+ skl_compute_plane_trans_wm(dev_priv, pipe_wm, intel_pstate,
+ selected_result, y_tile_minimum, y_tiled);
return 0;
}
@@ -3778,11 +3825,13 @@ skl_compute_linetime_wm(struct intel_crtc_state *cstate)
}
static void skl_compute_transition_wm(struct intel_crtc_state *cstate,
- struct skl_wm_level *trans_wm /* out */)
+ struct skl_wm_level *trans_wm, /* out */
+ struct skl_ddb_allocation *ddb)
{
struct drm_crtc *crtc = cstate->base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane;
+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
if (!cstate->base.active)
return;
@@ -3790,8 +3839,13 @@ static void skl_compute_transition_wm(struct intel_crtc_state *cstate,
/* Until we know more, just disable transition WMs */
for_each_intel_plane_on_crtc(crtc->dev, intel_crtc, intel_plane) {
int i = skl_wm_plane_id(intel_plane);
+ uint16_t plane_ddb = skl_ddb_entry_size(&ddb->plane[pipe][i]);
+ uint16_t trans_res_blocks = trans_wm->plane_res_b[i];
- trans_wm->plane_en[i] = false;
+ if ((plane_ddb > 0) && (trans_res_blocks > plane_ddb))
+ trans_wm->plane_en[i] = false;
+ else
+ trans_wm->plane_en[i] = true;
}
}
@@ -3822,7 +3876,7 @@ static int skl_build_pipe_wm(struct intel_crtc_state *cstate,
pipe_wm->linetime = skl_compute_linetime_wm(cstate);
- skl_compute_transition_wm(cstate, &pipe_wm->trans_wm);
+ skl_compute_transition_wm(cstate, &pipe_wm->trans_wm, ddb);
return 0;
}
--
2.8.3
More information about the Intel-gfx
mailing list