[Intel-gfx] [PATCH v3 6/9] drm/i915/skl+: change WM calc to fixed point 16.16

[Kumar, Mahesh]

From: Mahesh Kumar <mahesh1.kumar at intel.com>

This patch changes Watermak calculation to fixed point calculation.
Problem with current calculation is during plane_blocks_per_line
calculation we divide intermediate blocks with min_scanlines and
takes floor of the result because of integer operation.
hence we end-up assigning less blocks than required. Which leads to
flickers.

Signed-off-by: Mahesh Kumar <mahesh1.kumar at intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 0ec328b..d4390e4 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3530,13 +3530,15 @@ static uint32_t skl_pipe_pixel_rate(const struct intel_crtc_state *config)
 */
 static uint32_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, uint32_t latency)
 {
-	uint32_t wm_intermediate_val, ret;
+	uint64_t wm_intermediate_val;
+	uint32_t ret;
 
 	if (latency == 0)
 		return UINT_MAX;
 
-	wm_intermediate_val = latency * pixel_rate * cpp / 512;
-	ret = DIV_ROUND_UP(wm_intermediate_val, 1000);
+	wm_intermediate_val = latency * pixel_rate * cpp;
+	wm_intermediate_val <<= 16;
+	ret = DIV_ROUND_UP_ULL(wm_intermediate_val, 1000 * 512);
 
 	return ret;
 }
@@ -3605,6 +3607,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	uint16_t *out_blocks = &result->plane_res_b[id];
 	uint8_t *out_lines = &result->plane_res_l[id];
 	enum watermark_memory_wa mem_wa;
+	bool y_tiled = false;
 
 	if (latency == 0 || !cstate->base.active || !intel_pstate->base.visible)
 		return 0;
@@ -3652,14 +3655,18 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	plane_bytes_per_line = width * cpp;
 	if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
 	    fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
+		y_tiled = true;
 		plane_blocks_per_line =
 		      DIV_ROUND_UP(plane_bytes_per_line * y_min_scanlines, 512);
-		plane_blocks_per_line /= y_min_scanlines;
+		plane_blocks_per_line = (plane_blocks_per_line << 16) /
+								y_min_scanlines;
 	} else if (fb->modifier[0] == DRM_FORMAT_MOD_NONE) {
 		plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512)
 					+ 1;
+		plane_blocks_per_line <<= 16;
 	} else {
 		plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
+		plane_blocks_per_line <<= 16;
 	}
 
 	method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
@@ -3670,8 +3677,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 
 	y_tile_minimum = plane_blocks_per_line * y_min_scanlines;
 
-	if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
-	    fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
+	if (y_tiled) {
 		selected_result = max(method2, y_tile_minimum);
 	} else {
 		uint32_t linetime_us = 0;
@@ -3688,12 +3694,11 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 			selected_result = method1;
 	}
 
-	res_blocks = selected_result + 1;
+	res_blocks = DIV_ROUND_UP(selected_result, 1 << 16) + 1;
 	res_lines = DIV_ROUND_UP(selected_result, plane_blocks_per_line);
 
 	if (level >= 1 && level <= 7) {
-		if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
-		    fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
+		if (y_tiled) {
 			res_blocks += y_tile_minimum;
 			res_lines += y_min_scanlines;
 		} else {
-- 
2.8.3