[Intel-gfx] [PATCH] drm/i915/glk: limit pixel clock to 99% of cdclk workaround
Jani Nikula
jani.nikula at intel.com
Tue Apr 4 10:17:58 UTC 2017
On Tue, 04 Apr 2017, Ander Conselvan De Oliveira <conselvan2 at gmail.com> wrote:
> On Tue, 2017-04-04 at 11:40 +0300, Jani Nikula wrote:
>> On Tue, 04 Apr 2017, Ander Conselvan De Oliveira <conselvan2 at gmail.com> wrote:
>> > On Tue, 2017-04-04 at 11:15 +0300, Jani Nikula wrote:
>> > > From: Madhav Chauhan <madhav.chauhan at intel.com>
>> > >
>> > > As per BSPEC, valid cdclk values for glk are 79.2, 158.4, 316.8 Mhz.
>> > > Practically we can achive only 99% of these cdclk values (HW team
>> > > checking on this). So cdclk should be calculated for the given pixclk as
>> > > per that otherwise it may lead to screen corruption for some scenarios.
>> > >
>> > > v2: Rebased to new CDLCK code framework
>> > > v3: Addressed review comments from Ander/Jani
>> > > - Add comment in code about 99% usage of CDCLK
>> > > - Calculate max dot clock as well with 99% limit
>> > > v4 by Jani:
>> > > - drop superfluous whitespace change
>> > > - rewrite code comments to clarify
>> > >
>> > > Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
>> > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
>> > > Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
>> > > Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>> > > ---
>> > > drivers/gpu/drm/i915/intel_cdclk.c | 16 +++++++++++++---
>> > > 1 file changed, 13 insertions(+), 3 deletions(-)
>> > >
>> > > diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
>> > > index dd3ad52b7dfe..763010f8ad89 100644
>> > > --- a/drivers/gpu/drm/i915/intel_cdclk.c
>> > > +++ b/drivers/gpu/drm/i915/intel_cdclk.c
>> > > @@ -1071,9 +1071,15 @@ static int bxt_calc_cdclk(int max_pixclk)
>> > >
>> > > static int glk_calc_cdclk(int max_pixclk)
>> > > {
>> > > - if (max_pixclk > 2 * 158400)
>> > > + /*
>> > > + * FIXME: Avoid using a pixel clock that is more than 99% of the cdclk
>> > > + * as a temporary workaround. Use a higher cdclk instead. (Note that
>> >
>> > Temporary workaround for what? Neither the comment nor the commit message
>> > explicitly lists the scenario that triggers this issue.
>>
>> Frankly I did not know what to write.
>
>
>> There are issues with pixel clocks
>> near cdclk that shouldn't happen. People are looking into this, but in
>> the mean time dodge the issues by using higher cdclk. The issue should
>> not be encoder specific, but in practice this has only been seen with
>> DSI because there were some modes with pixel clocks that are near the
>> cdclk.
>
> The above plus the model number of the DSI panel with which the issue has been
> seen would be good enough IMO.
Madhav?
>
> Ander
>
>
>> > With that fixed,
>> >
>> > Reviewed-by: Ander Conselvan de Oliveira <conselvan2 at gmail.com>
>> >
>> > > + * intel_compute_max_dotclk() limits the max pixel clock to 99% of max
>> > > + * cdclk.)
>> > > + */
>> > > + if (max_pixclk > DIV_ROUND_UP(2 * 158400 * 99, 100))
>> > > return 316800;
>> > > - else if (max_pixclk > 2 * 79200)
>> > > + else if (max_pixclk > DIV_ROUND_UP(2 * 79200 * 99, 100))
>> > > return 158400;
>> > > else
>> > > return 79200;
>> > > @@ -1664,7 +1670,11 @@ static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
>> > > int max_cdclk_freq = dev_priv->max_cdclk_freq;
>> > >
>> > > if (IS_GEMINILAKE(dev_priv))
>> > > - return 2 * max_cdclk_freq;
>> > > + /*
>> > > + * FIXME: Limiting to 99% as a temporary workaround. See
>> > > + * glk_calc_cdclk() for details.
>> > > + */
>> > > + return 2 * max_cdclk_freq * 99 / 100;
>> > > else if (INTEL_INFO(dev_priv)->gen >= 9 ||
>> > > IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
>> > > return max_cdclk_freq;
>>
>>
--
Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list