[Intel-gfx] [PATCH i-g-t v2] tests/kms_atomic_allow_modeset: Add DRM_MODE_ATOMIC_ALLOW_MODESET test

[Mika Kahola]

On Tue, 2017-04-04 at 14:28 +0200, Maarten Lankhorst wrote:
> Hey,
> 
> Op 04-04-17 om 13:59 schreef Mika Kahola:
> > 
> > When doing a full atomic modeset, kernel should fail if the flag
> > DRM_MODE_ATOMIC_ALLOW_MODESET is not set. Let's add this test as
> > part of
> > Intel-GPU-Tools. The test procedure is the following:
> > 
> > - Try to do atomic commit without DRM_MODE_ATOMIC_ALLOW_MODESET
> > flag.
> >   Kernel should reject this request.
> > - Do full modeset
> > - Enable DRM_MODE_ATOMIC_ALLOW_MODESET and try to do atmic commit.
> >   Kernel should now allow atomic modeset.
> > 
> > For: VIZ-6955
> > 
> > Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> > ---
> >  tests/Makefile.sources           |   1 +
> >  tests/kms_atomic_allow_modeset.c | 133
> > +++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 134 insertions(+)
> >  create mode 100644 tests/kms_atomic_allow_modeset.c
> > 
> > diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> > index 45c21a0..d3ee629 100644
> > --- a/tests/Makefile.sources
> > +++ b/tests/Makefile.sources
> > @@ -94,6 +94,7 @@ TESTS_progs_M = \
> >  	kms_addfb_basic \
> >  	kms_atomic \
> >  	kms_atomic_transition \
> > +	kms_atomic_allow_modeset \
> >  	kms_busy \
> >  	kms_ccs \
> >  	kms_chv_cursor_fail \
> > diff --git a/tests/kms_atomic_allow_modeset.c
> > b/tests/kms_atomic_allow_modeset.c
> > new file mode 100644
> > index 0000000..b4d8c16
> > --- /dev/null
> > +++ b/tests/kms_atomic_allow_modeset.c
> > @@ -0,0 +1,133 @@
> > +/*
> > + * Copyright © 2017 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person
> > obtaining a
> > + * copy of this software and associated documentation files (the
> > "Software"),
> > + * to deal in the Software without restriction, including without
> > limitation
> > + * the rights to use, copy, modify, merge, publish, distribute,
> > sublicense,
> > + * and/or sell copies of the Software, and to permit persons to
> > whom the
> > + * Software is furnished to do so, subject to the following
> > conditions:
> > + *
> > + * The above copyright notice and this permission notice
> > (including the next
> > + * paragraph) shall be included in all copies or substantial
> > portions of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO
> > EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> > DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> > ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + *
> > + */
> > +
> > +#include "igt.h"
> > +
> > +IGT_TEST_DESCRIPTION("Test that kernel rejects atomic modeset if
> > ALLOW_MODESET flag is not set");
> > +
> > +static void
> > +test_init(igt_display_t *display, struct igt_fb *fb, igt_output_t
> > *output)
> > +{
> > +	drmModeModeInfo *mode;
> > +	igt_plane_t *primary;
> > +	int id;
> > +
> > +	mode = igt_output_get_mode(output);
> > +
> > +	id = igt_create_pattern_fb(display->drm_fd,
> > +				   mode->hdisplay, mode->vdisplay,
> > +				   DRM_FORMAT_XRGB8888,
> > +				   LOCAL_I915_FORMAT_MOD_X_TILED,
> > +				   fb);
> > +	igt_assert(id);
> > +
> > +	primary = igt_output_get_plane_type(output,
> > DRM_PLANE_TYPE_PRIMARY);
> > +	igt_plane_set_fb(primary, fb);
> > +}
> > +
> > +static void
> > +test_finish(igt_display_t *display, struct igt_fb *fb,
> > igt_output_t *output)
> > +{
> > +	igt_plane_t *primary;
> > +
> > +	primary = igt_output_get_plane_type(output,
> > DRM_PLANE_TYPE_PRIMARY);
> > +
> > +	igt_remove_fb(display->drm_fd, fb);
> > +
> > +	igt_plane_set_fb(primary, NULL);
> > +	igt_output_set_pipe(output, PIPE_ANY);
> > +
> > +	igt_display_commit2(display, COMMIT_ATOMIC);
> > +}
> > +
> > +static void
> > +test_allow_modeset(igt_display_t *display, enum pipe pipe,
> > igt_output_t *output)
> > +{
> > +	struct igt_fb fb;
> > +	int flags = DRM_MODE_ATOMIC_NONBLOCK;
> > +	int ret;
> > +
> > +	igt_output_set_pipe(output, pipe);
> > +
> > +	test_init(display, &fb, output);
> > +
> > +	/*
> > +	 * Try to do atomic commit without
> > DRM_MODE_ATOMIC_ALLOW_MODESET flag.
> > +	 * Kernel should reject this request.
> > +	 */
> > +	ret = igt_display_try_commit_atomic(display, flags, NULL);
> > +	igt_assert_eq(ret, -EINVAL);
> > +
> > +	/* do modeset */
> > +	igt_output_set_pipe(output, pipe);
> > +
> > +	/*
> > +	 * Try to do atomic commit with
> > DRM_MODE_ATOMIC_ALLOW_MODESET flag set.
> > +	 * The kernel should now accept this request.
> > +	 */
> > +	flags |= DRM_MODE_ATOMIC_ALLOW_MODESET;
> > +	ret = igt_display_try_commit_atomic(display, flags, NULL);
> > +	igt_assert_eq(ret, 0);
> > +
> > +	test_finish(display, &fb, output);
> > +}
> > +
> > +igt_simple_main
> > +{
> > +	igt_output_t *output;
> > +	igt_display_t display;
> > +	drmModeResPtr res;
> > +	enum pipe pipe;
> > +
> > +	igt_skip_on_simulation();
> > +
> > +	igt_fixture {
> > +		int valid_outputs = 0;
> > +
> > +		display.drm_fd =
> > drm_open_driver_master(DRIVER_ANY);
> > +		igt_enable_connectors();
> > +		kmstest_set_vt_graphics_mode();
> > +		igt_display_init(&display, display.drm_fd);
> > +		igt_require(display.is_atomic);
> > +
> > +		for_each_pipe_with_valid_output(&display, pipe,
> > output)
> > +			valid_outputs++;
> > +
> > +		igt_require_f(valid_outputs, "no valid
> > crtc/connector combinations found\n");
> > +	}
> > +
> > +	res = drmModeGetResources(display.drm_fd);
> > +	kmstest_unset_all_crtcs(display.drm_fd, res);
> ^Why is either needed? And why outside fixture?
Connector testing seems to need this. I'll move this inside igt_fixture
as that is the better place for these.

> > 
> > +
> > +	for_each_pipe_with_valid_output(&display, pipe, output)
> > +		test_allow_modeset(&display, pipe, output);
> > +
> > +	igt_fixture {
> > +		igt_display_fini(&display);
> > +		igt_reset_connectors();
> > +		drmModeFreeResources(res);
> > +	}
> > +
> > +	igt_exit();
> > +}
> This tests one source of allow_modeset. There are 2 more:
> Changing only the active property, which is similar to toggling dpms.
> Assigning a different connector to the current crtc
> 
> I think the active property should be tested too at least.
Ok. I'll add active property testing as one of the subtests.

> 
> ~Maarten
> 
-- 
Mika Kahola - Intel OTC