[Intel-gfx] [PATCH 30/67] drm/i915/cnl: Implement CNL display init/unit sequence
Rodrigo Vivi
rodrigo.vivi at intel.com
Thu Apr 6 19:15:26 UTC 2017
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Implement the CNL display init/uninit sequence as outlined in Bspec.
Quite similar to SKL/BXT. The main complicaiton is probably the extra
procmon setup we must do based on the process/voltage information we
can read out from some register.
For now we assume DMC will handle the AUX wells, and we'll just enable
all of them during the init sequence. Even if DMC will handle them, we
should perhaps trim the set of enabled wells based on which DDI ports
are actually present.
v2: s/skl_dbuf/gen9_dbuf/ to follow upstream
bxt needed a cdclk sanitize step, so let's add it for cnl too
v3: s/CHICKEN_MISC_1/CHICKEN_MISC_2/ (Ander)
v4: Rebased by Rodrigo after Ville's cdclk rework
v5: Removed unecessary Aux IO forced enable/disable, Fix DW10 setup
Fix procpon Mask. (Credits-to Paulo and Clint)
Remove A0 workaround.
v6: Rebased on top of recent code (Rodrigo).
v7: Respect the order of sanitize_ after set_
(Done by Rodrigo, Requested by Ville)
Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Cc: Clint Taylor <clinton.a.taylor at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 25 +++++++
drivers/gpu/drm/i915/intel_cdclk.c | 108 ++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 2 +
drivers/gpu/drm/i915/intel_runtime_pm.c | 113 +++++++++++++++++++++++++++++++-
4 files changed, 246 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8353892..3cfc65f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1655,6 +1655,9 @@ enum skl_disp_power_wells {
#define PHY_RESERVED (1 << 7)
#define BXT_PORT_CL1CM_DW0(phy) _BXT_PHY((phy), _PORT_CL1CM_DW0_BC)
+#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014)
+#define CL_POWER_DOWN_ENABLE (1 << 4)
+
#define _PORT_CL1CM_DW9_A 0x162024
#define _PORT_CL1CM_DW9_BC 0x6C024
#define IREF0RC_OFFSET_SHIFT 8
@@ -1687,6 +1690,25 @@ enum skl_disp_power_wells {
#define BXT_PORT_CL2CM_DW6(phy) _BXT_PHY((phy), _PORT_CL2CM_DW6_BC)
#define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28)
+#define CNL_PORT_COMP_DW0 _MMIO(0x162100)
+#define COMP_INIT (1 << 31)
+#define CNL_PORT_COMP_DW1 _MMIO(0x162104)
+#define CNL_PORT_COMP_DW3 _MMIO(0x16210c)
+#define PROCESS_INFO_DOT_0 (0 << 26)
+#define PROCESS_INFO_DOT_1 (1 << 26)
+#define PROCESS_INFO_DOT_4 (2 << 26)
+#define PROCESS_INFO_MASK (7 << 26)
+#define PROCESS_INFO_SHIFT 26
+#define VOLTAGE_INFO_0_85V (0 << 24)
+#define VOLTAGE_INFO_0_95V (1 << 24)
+#define VOLTAGE_INFO_1_05V (2 << 24)
+#define VOLTAGE_INFO_MASK (3 << 24)
+#define VOLTAGE_INFO_SHIFT 24
+#define CNL_PORT_COMP_DW8 _MMIO(0x162120)
+#define PRDIC_ICOMP_DIS (1 << 14)
+#define CNL_PORT_COMP_DW9 _MMIO(0x162124)
+#define CNL_PORT_COMP_DW10 _MMIO(0x162128)
+
/* BXT PHY Ref registers */
#define _PORT_REF_DW3_A 0x16218C
#define _PORT_REF_DW3_BC 0x6C18C
@@ -6517,6 +6539,9 @@ enum {
#define GLK_CL1_PWR_DOWN (1 << 11)
#define GLK_CL2_PWR_DOWN (1 << 12)
+#define CHICKEN_MISC_2 _MMIO(0x42084)
+#define COMP_PWR_DOWN (1 << 23)
+
#define _CHICKEN_PIPESL_1_A 0x420b0
#define _CHICKEN_PIPESL_1_B 0x420b4
#define HSW_FBCQ_DIS (1 << 22)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index bee4394..f9ba1e7 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -1555,6 +1555,114 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
intel_update_cdclk(dev_priv);
}
+static int cnl_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
+{
+ int ratio;
+
+ if (cdclk == dev_priv->cdclk.hw.ref)
+ return 0;
+
+ switch (cdclk) {
+ default:
+ MISSING_CASE(cdclk);
+ case 168000:
+ case 336000:
+ ratio = dev_priv->cdclk.hw.ref == 19200 ? 35 : 28;
+ break;
+ case 528000:
+ ratio = dev_priv->cdclk.hw.ref == 19200 ? 55 : 44;
+ break;
+ }
+
+ return dev_priv->cdclk.hw.ref * ratio;
+}
+
+static void cnl_sanitize_cdclk(struct drm_i915_private *dev_priv)
+{
+ u32 cdctl, expected;
+
+ intel_update_cdclk(dev_priv);
+
+ if (dev_priv->cdclk.hw.vco == 0 ||
+ dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
+ goto sanitize;
+
+ /* DPLL okay; verify the cdclock
+ *
+ * Some BIOS versions leave an incorrect decimal frequency value and
+ * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
+ * so sanitize this register.
+ */
+ cdctl = I915_READ(CDCLK_CTL);
+ /*
+ * Let's ignore the pipe field, since BIOS could have configured the
+ * dividers both synching to an active pipe, or asynchronously
+ * (PIPE_NONE).
+ */
+ cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
+
+ expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
+ skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
+
+ if (cdctl == expected)
+ /* All well; nothing to sanitize */
+ return;
+
+sanitize:
+ DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
+
+ /* force cdclk programming */
+ dev_priv->cdclk.hw.cdclk = 0;
+
+ /* force full PLL disable + enable */
+ dev_priv->cdclk.hw.vco = -1;
+}
+
+/**
+ * cnl_init_cdclk - Initialize CDCLK on CNL
+ * @dev_priv: i915 device
+ *
+ * Initialize CDCLK for CNL. This is generally
+ * done only during the display core initialization sequence,
+ * after which the DMC will take care of turning CDCLK off/on
+ * as needed.
+ */
+
+void cnl_init_cdclk(struct drm_i915_private *dev_priv)
+{
+ struct intel_cdclk_state cdclk_state;
+
+ cnl_sanitize_cdclk(dev_priv);
+
+ if (dev_priv->cdclk.hw.cdclk != 0 &&
+ dev_priv->cdclk.hw.vco != 0)
+ return;
+
+ cdclk_state = dev_priv->cdclk.hw;
+
+ cdclk_state.cdclk = 168000;
+ cdclk_state.vco = cnl_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
+
+ cnl_set_cdclk(dev_priv, &cdclk_state);
+}
+
+/**
+ * cnl_uninit_cdclk - Uninitialize CDCLK on CNL
+ * @dev_priv: i915 device
+ *
+ * Uninitialize CDCLK for CNL. This is done only
+ * during the display core uninitialization sequence.
+ */
+void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
+{
+ struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
+
+ cdclk_state.cdclk = cdclk_state.ref;
+ cdclk_state.vco = 0;
+
+ cnl_set_cdclk(dev_priv, &cdclk_state);
+}
+
/**
* intel_cdclk_state_compare - Determine if two CDCLK states differ
* @a: first CDCLK state
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7bc0c25..a526e6e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1280,6 +1280,8 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
/* intel_cdclk.c */
void skl_init_cdclk(struct drm_i915_private *dev_priv);
void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
+void cnl_init_cdclk(struct drm_i915_private *dev_priv);
+void cnl_uninit_cdclk(struct drm_i915_private *dev_priv);
void bxt_init_cdclk(struct drm_i915_private *dev_priv);
void bxt_uninit_cdclk(struct drm_i915_private *dev_priv);
void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 1797c91..5c3c6ec 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -2698,6 +2698,111 @@ void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
mutex_unlock(&power_domains->lock);
}
+#define CNL_PROCMON_IDX(val) \
+ (((val) & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) >> VOLTAGE_INFO_SHIFT)
+#define NUM_CNL_PROCMON \
+ (CNL_PROCMON_IDX(VOLTAGE_INFO_MASK | PROCESS_INFO_MASK) + 1)
+
+static const struct cnl_procmon {
+ u32 dw1, dw9, dw10;
+} cnl_procmon_values[NUM_CNL_PROCMON] = {
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_0_85V | PROCESS_INFO_DOT_0)] =
+ { .dw1 = 0x00 << 16, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_0)] =
+ { .dw1 = 0x00 << 16, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_1)] =
+ { .dw1 = 0x00 << 16, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_0)] =
+ { .dw1 = 0x00 << 16, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_1)] =
+ { .dw1 = 0x44 << 16, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
+};
+
+static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ const struct cnl_procmon *procmon;
+ struct i915_power_well *well;
+ u32 val;
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ /* 1. Enable PCH Reset Handshake */
+ val = I915_READ(HSW_NDE_RSTWRN_OPT);
+ val |= RESET_PCH_HANDSHAKE_ENABLE;
+ I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
+
+ /* 2. Enable Comp */
+ val = I915_READ(CHICKEN_MISC_2);
+ val &= ~COMP_PWR_DOWN;
+ I915_WRITE(CHICKEN_MISC_2, val);
+
+ val = I915_READ(CNL_PORT_COMP_DW3);
+ procmon = &cnl_procmon_values[CNL_PROCMON_IDX(val)];
+
+ WARN_ON(procmon->dw10 == 0);
+
+ val = I915_READ(CNL_PORT_COMP_DW1);
+ val &= ~((0xff << 16) | 0xff);
+ val |= procmon->dw1;
+ I915_WRITE(CNL_PORT_COMP_DW1, val);
+
+ I915_WRITE(CNL_PORT_COMP_DW9, procmon->dw9);
+ I915_WRITE(CNL_PORT_COMP_DW10, procmon->dw10);
+
+ val = I915_READ(CNL_PORT_COMP_DW0);
+ val |= COMP_INIT;
+ I915_WRITE(CNL_PORT_COMP_DW0, val);
+
+ /* 3. */
+ val = I915_READ(CNL_PORT_CL1CM_DW5);
+ val |= CL_POWER_DOWN_ENABLE;
+ I915_WRITE(CNL_PORT_CL1CM_DW5, val);
+
+ /* 4. Enable Power Well 1 (PG1) and Aux IO Power */
+ mutex_lock(&power_domains->lock);
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_enable(dev_priv, well);
+ mutex_unlock(&power_domains->lock);
+
+ /* 5. Enable CD clock */
+ cnl_init_cdclk(dev_priv);
+
+ /* 6. Enable DBUF */
+ gen9_dbuf_enable(dev_priv);
+}
+
+#undef CNL_PROCMON_IDX
+#undef NUM_CNL_PROCMON
+
+static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *well;
+ u32 val;
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ /* 1. Disable all display engine functions -> aready done */
+
+ /* 2. Disable DBUF */
+ gen9_dbuf_disable(dev_priv);
+
+ /* 3. Disable CD clock */
+ cnl_uninit_cdclk(dev_priv);
+
+ /* 4. Disable Power Well 1 (PG1) and Aux IO Power */
+ mutex_lock(&power_domains->lock);
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_disable(dev_priv, well);
+ mutex_unlock(&power_domains->lock);
+
+ /* 5. Disable Comp */
+ val = I915_READ(CHICKEN_MISC_2);
+ val |= COMP_PWR_DOWN;
+ I915_WRITE(CHICKEN_MISC_2, val);
+}
+
static void chv_phy_control_init(struct drm_i915_private *dev_priv)
{
struct i915_power_well *cmn_bc =
@@ -2830,7 +2935,9 @@ void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
power_domains->initializing = true;
- if (IS_GEN9_BC(dev_priv)) {
+ if (IS_CANNONLAKE(dev_priv)) {
+ cnl_display_core_init(dev_priv, resume);
+ } else if (IS_GEN9_BC(dev_priv)) {
skl_display_core_init(dev_priv, resume);
} else if (IS_GEN9_LP(dev_priv)) {
bxt_display_core_init(dev_priv, resume);
@@ -2869,7 +2976,9 @@ void intel_power_domains_suspend(struct drm_i915_private *dev_priv)
if (!i915.disable_power_well)
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
- if (IS_GEN9_BC(dev_priv))
+ if (IS_CANNONLAKE(dev_priv))
+ cnl_display_core_uninit(dev_priv);
+ else if (IS_GEN9_BC(dev_priv))
skl_display_core_uninit(dev_priv);
else if (IS_GEN9_LP(dev_priv))
bxt_display_core_uninit(dev_priv);
--
1.9.1
More information about the Intel-gfx
mailing list