[Intel-gfx] [PATCH 55/67] drm/i915/gen10: implement gen 10 watermarks calculations
Rodrigo Vivi
rodrigo.vivi at intel.com
Thu Apr 6 19:15:51 UTC 2017
From: Paulo Zanoni <paulo.r.zanoni at intel.com>
They're slightly different than the gen 9 calculations.
TODO: before upstraming this, check if the spec is still the same.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 0194d55..b07369a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3692,8 +3692,9 @@ void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
* should allow pixel_rate up to ~2 GHz which seems sufficient since max
* 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
*/
-static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
- uint32_t latency)
+static uint_fixed_16_16_t
+skl_wm_method1(const struct drm_i915_private *dev_priv, uint32_t pixel_rate,
+ uint8_t cpp, uint32_t latency)
{
uint32_t wm_intermediate_val;
uint_fixed_16_16_t ret;
@@ -3703,6 +3704,10 @@ static uint_fixed_16_16_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp,
wm_intermediate_val = latency * pixel_rate * cpp;
ret = fixed_16_16_div_round_up_u64(wm_intermediate_val, 1000 * 512);
+
+ if (INTEL_GEN(dev_priv) >= 10)
+ ret.val += 1 << 16;
+
return ret;
}
@@ -3836,11 +3841,15 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
plane_bytes_per_line = width * cpp;
if (y_tiled) {
- interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line *
- y_min_scanlines, 512);
+ interm_pbpl = plane_bytes_per_line * y_min_scanlines;
+
+ if (INTEL_GEN(dev_priv) >= 10)
+ interm_pbpl++;
+
+ interm_pbpl = DIV_ROUND_UP(interm_pbpl, 512);
plane_blocks_per_line =
fixed_16_16_div_round_up(interm_pbpl, y_min_scanlines);
- } else if (x_tiled) {
+ } else if (x_tiled && INTEL_GEN(dev_priv) == 9) {
interm_pbpl = DIV_ROUND_UP(plane_bytes_per_line, 512);
plane_blocks_per_line = u32_to_fixed_16_16(interm_pbpl);
} else {
@@ -3848,7 +3857,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
plane_blocks_per_line = u32_to_fixed_16_16(interm_pbpl);
}
- method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
+ method1 = skl_wm_method1(dev_priv, plane_pixel_rate, cpp, latency);
method2 = skl_wm_method2(plane_pixel_rate,
cstate->base.adjusted_mode.crtc_htotal,
latency,
@@ -3865,7 +3874,11 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
selected_result = method2;
else if ((ddb_allocation /
fixed_16_16_to_u32_round_up(plane_blocks_per_line)) >= 1)
- selected_result = min_fixed_16_16(method1, method2);
+ if (INTEL_GEN(dev_priv) == 9)
+ selected_result = min_fixed_16_16(method1,
+ method2);
+ else
+ selected_result = method2;
else
selected_result = method1;
}
--
1.9.1
More information about the Intel-gfx
mailing list