[Intel-gfx] [PATCH 02/13] drm/i915: Convert intel_tv connector properties to atomic, v5.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Wed Apr 12 07:43:00 UTC 2017
Op 12-04-17 om 09:38 schreef Daniel Vetter:
> On Fri, Apr 07, 2017 at 08:07:51AM +0200, Maarten Lankhorst wrote:
>> As a proof of concept, first try to convert intel_tv, which is a rarely
>> used connector. It has 5 properties, tv format and 4 margins.
>>
>> I'm less certain about the state behavior itself, should we pass a size
>> parameter to intel_connector_alloc instead, so duplicate_state
>> can be done globally if it can be blindly copied?
>>
>> Can we also have a atomic_check function for connectors, so the
>> crtc_state->connectors_changed can be set there? It would be cleaner
>> and more atomic-like.
>>
>> To match the legacy behavior, format can be changed by probing just like
>> in legacy mode.
>>
>> Changes since v1:
>> - Add intel_encoder->swap_state to allow updating connector state.
>> - Add intel_tv->format for detect_mode and mode_valid, updated on atomic commit.
>> Changes since v2:
>> - Fix typo in tv_choose_preferred modes function name.
>> - Assignment of tv properties is done in core, so intel_tv only needs
>> a atomic_check function. Thanks Ville!
>> Changes since v3:
>> - connection_mutex is now held in mode_valid() and get_modes(),
>> this removes the need for caching parts of the connector_state.
>> Changes since v4:
>> - Use the new atomic connector check function.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_tv.c | 175 +++++++++++++++-------------------------
>> 1 file changed, 63 insertions(+), 112 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
>> index 3af857a75fab..784df024e230 100644
>> --- a/drivers/gpu/drm/i915/intel_tv.c
>> +++ b/drivers/gpu/drm/i915/intel_tv.c
>> @@ -48,8 +48,6 @@ struct intel_tv {
>> struct intel_encoder base;
>>
>> int type;
>> - const char *tv_format;
>> - int margin[4];
>> };
>>
>> struct video_levels {
>> @@ -840,32 +838,18 @@ intel_disable_tv(struct intel_encoder *encoder,
>> I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE);
>> }
>>
>> -static const struct tv_mode *
>> -intel_tv_mode_lookup(const char *tv_format)
>> +static const struct tv_mode *intel_tv_mode_find(struct drm_connector_state *conn_state)
>> {
>> - int i;
>> -
>> - for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
>> - const struct tv_mode *tv_mode = &tv_modes[i];
>> + int format = conn_state->tv.mode;
>>
>> - if (!strcmp(tv_format, tv_mode->name))
>> - return tv_mode;
>> - }
>> - return NULL;
>> -}
>> -
>> -static const struct tv_mode *
>> -intel_tv_mode_find(struct intel_tv *intel_tv)
>> -{
>> - return intel_tv_mode_lookup(intel_tv->tv_format);
>> + return &tv_modes[format];
>> }
>>
>> static enum drm_mode_status
>> intel_tv_mode_valid(struct drm_connector *connector,
>> struct drm_display_mode *mode)
>> {
>> - struct intel_tv *intel_tv = intel_attached_tv(connector);
>> - const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
>> + const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state);
>> int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
>>
>> if (mode->clock > max_dotclk)
>> @@ -892,8 +876,7 @@ intel_tv_compute_config(struct intel_encoder *encoder,
>> struct intel_crtc_state *pipe_config,
>> struct drm_connector_state *conn_state)
>> {
>> - struct intel_tv *intel_tv = enc_to_tv(encoder);
>> - const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
>> + const struct tv_mode *tv_mode = intel_tv_mode_find(conn_state);
>>
>> if (!tv_mode)
>> return false;
>> @@ -999,7 +982,7 @@ static void intel_tv_pre_enable(struct intel_encoder *encoder,
>> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
>> struct intel_tv *intel_tv = enc_to_tv(encoder);
>> - const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
>> + const struct tv_mode *tv_mode = intel_tv_mode_find(conn_state);
>> u32 tv_ctl;
>> u32 scctl1, scctl2, scctl3;
>> int i, j;
>> @@ -1102,12 +1085,12 @@ static void intel_tv_pre_enable(struct intel_encoder *encoder,
>> else
>> ysize = 2*tv_mode->nbr_end + 1;
>>
>> - xpos += intel_tv->margin[TV_MARGIN_LEFT];
>> - ypos += intel_tv->margin[TV_MARGIN_TOP];
>> - xsize -= (intel_tv->margin[TV_MARGIN_LEFT] +
>> - intel_tv->margin[TV_MARGIN_RIGHT]);
>> - ysize -= (intel_tv->margin[TV_MARGIN_TOP] +
>> - intel_tv->margin[TV_MARGIN_BOTTOM]);
>> + xpos += conn_state->tv.margins.left;
>> + ypos += conn_state->tv.margins.top;
>> + xsize -= (conn_state->tv.margins.left +
>> + conn_state->tv.margins.right);
>> + ysize -= (conn_state->tv.margins.top +
>> + conn_state->tv.margins.bottom);
>> I915_WRITE(TV_WIN_POS, (xpos<<16)|ypos);
>> I915_WRITE(TV_WIN_SIZE, (xsize<<16)|ysize);
>>
>> @@ -1255,7 +1238,7 @@ intel_tv_detect_type(struct intel_tv *intel_tv,
>> static void intel_tv_find_better_format(struct drm_connector *connector)
>> {
>> struct intel_tv *intel_tv = intel_attached_tv(connector);
>> - const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
>> + const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state);
>> int i;
>>
>> if ((intel_tv->type == DRM_MODE_CONNECTOR_Component) ==
>> @@ -1271,9 +1254,7 @@ static void intel_tv_find_better_format(struct drm_connector *connector)
>> break;
>> }
>>
>> - intel_tv->tv_format = tv_mode->name;
>> - drm_object_property_set_value(&connector->base,
>> - connector->dev->mode_config.tv_mode_property, i);
>> + connector->state->tv.mode = i;
>> }
>>
>> /**
>> @@ -1314,16 +1295,15 @@ intel_tv_detect(struct drm_connector *connector,
>> connector_status_connected;
>> } else
>> status = connector_status_unknown;
>> - } else
>> - return connector->status;
>>
>> - if (status != connector_status_connected)
>> - return status;
>> -
>> - intel_tv->type = type;
>> - intel_tv_find_better_format(connector);
>> + if (status == connector_status_connected) {
>> + intel_tv->type = type;
>> + intel_tv_find_better_format(connector);
>> + }
>>
>> - return connector_status_connected;
>> + return status;
>> + } else
>> + return connector->status;
>> }
>>
>> static const struct input_res {
>> @@ -1343,12 +1323,9 @@ static const struct input_res {
>> * Chose preferred mode according to line number of TV format
>> */
>> static void
>> -intel_tv_chose_preferred_modes(struct drm_connector *connector,
>> +intel_tv_choose_preferred_modes(const struct tv_mode *tv_mode,
>> struct drm_display_mode *mode_ptr)
>> {
>> - struct intel_tv *intel_tv = intel_attached_tv(connector);
>> - const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
>> -
>> if (tv_mode->nbr_end < 480 && mode_ptr->vdisplay == 480)
>> mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
>> else if (tv_mode->nbr_end > 480) {
>> @@ -1371,8 +1348,7 @@ static int
>> intel_tv_get_modes(struct drm_connector *connector)
>> {
>> struct drm_display_mode *mode_ptr;
>> - struct intel_tv *intel_tv = intel_attached_tv(connector);
>> - const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
>> + const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state);
>> int j, count = 0;
>> u64 tmp;
>>
>> @@ -1415,7 +1391,7 @@ intel_tv_get_modes(struct drm_connector *connector)
>> mode_ptr->clock = (int) tmp;
>>
>> mode_ptr->type = DRM_MODE_TYPE_DRIVER;
>> - intel_tv_chose_preferred_modes(connector, mode_ptr);
>> + intel_tv_choose_preferred_modes(tv_mode, mode_ptr);
>> drm_mode_probed_add(connector, mode_ptr);
>> count++;
>> }
>> @@ -1430,74 +1406,47 @@ intel_tv_destroy(struct drm_connector *connector)
>> kfree(connector);
>> }
>>
>> -
>> -static int
>> -intel_tv_set_property(struct drm_connector *connector, struct drm_property *property,
>> - uint64_t val)
>> -{
>> - struct drm_device *dev = connector->dev;
>> - struct intel_tv *intel_tv = intel_attached_tv(connector);
>> - struct drm_crtc *crtc = intel_tv->base.base.crtc;
>> - int ret = 0;
>> - bool changed = false;
>> -
>> - ret = drm_object_property_set_value(&connector->base, property, val);
>> - if (ret < 0)
>> - goto out;
>> -
>> - if (property == dev->mode_config.tv_left_margin_property &&
>> - intel_tv->margin[TV_MARGIN_LEFT] != val) {
>> - intel_tv->margin[TV_MARGIN_LEFT] = val;
>> - changed = true;
>> - } else if (property == dev->mode_config.tv_right_margin_property &&
>> - intel_tv->margin[TV_MARGIN_RIGHT] != val) {
>> - intel_tv->margin[TV_MARGIN_RIGHT] = val;
>> - changed = true;
>> - } else if (property == dev->mode_config.tv_top_margin_property &&
>> - intel_tv->margin[TV_MARGIN_TOP] != val) {
>> - intel_tv->margin[TV_MARGIN_TOP] = val;
>> - changed = true;
>> - } else if (property == dev->mode_config.tv_bottom_margin_property &&
>> - intel_tv->margin[TV_MARGIN_BOTTOM] != val) {
>> - intel_tv->margin[TV_MARGIN_BOTTOM] = val;
>> - changed = true;
>> - } else if (property == dev->mode_config.tv_mode_property) {
>> - if (val >= ARRAY_SIZE(tv_modes)) {
>> - ret = -EINVAL;
>> - goto out;
>> - }
>> - if (!strcmp(intel_tv->tv_format, tv_modes[val].name))
>> - goto out;
>> -
>> - intel_tv->tv_format = tv_modes[val].name;
>> - changed = true;
>> - } else {
>> - ret = -EINVAL;
>> - goto out;
>> - }
>> -
>> - if (changed && crtc)
>> - intel_crtc_restore_mode(crtc);
>> -out:
>> - return ret;
>> -}
>> -
>> static const struct drm_connector_funcs intel_tv_connector_funcs = {
>> .dpms = drm_atomic_helper_connector_dpms,
>> .late_register = intel_connector_register,
>> .early_unregister = intel_connector_unregister,
>> .destroy = intel_tv_destroy,
>> - .set_property = intel_tv_set_property,
>> - .atomic_get_property = intel_connector_atomic_get_property,
>> + .set_property = drm_atomic_helper_connector_set_property,
>> .fill_modes = drm_helper_probe_single_connector_modes,
>> .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> };
>>
>> +static int intel_tv_atomic_check(struct drm_connector *connector,
>> + struct drm_connector_state *new_state)
>> +{
>> + struct drm_crtc_state *new_crtc_state;
>> + struct drm_connector_state *old_state;
>> +
>> + if (!new_state->crtc)
>> + return 0;
>> +
>> + old_state = drm_atomic_get_old_connector_state(new_state->state, connector);
>> + new_crtc_state = drm_atomic_get_new_crtc_state(new_state->state, new_state->crtc);
>> +
>> + if (old_state->tv.mode != new_state->tv.mode ||
>> + old_state->tv.margins.left != new_state->tv.margins.left ||
>> + old_state->tv.margins.right != new_state->tv.margins.right ||
>> + old_state->tv.margins.top != new_state->tv.margins.top ||
>> + old_state->tv.margins.bottom != new_state->tv.margins.bottom) {
>> + /* Force a modeset. */
>> +
>> + new_crtc_state->connectors_changed = true;
>> + }
> I wonder whether we should have a default atomic_check for TV, which does
> exactly the above? Otoh, 2nd driver to use them can do this :-)
>
>> +
>> + return 0;
>> +}
>> +
>> static const struct drm_connector_helper_funcs intel_tv_connector_helper_funcs = {
>> .detect_ctx = intel_tv_detect,
>> .mode_valid = intel_tv_mode_valid,
>> .get_modes = intel_tv_get_modes,
>> + .atomic_check = intel_tv_atomic_check,
>> };
>>
>> static const struct drm_encoder_funcs intel_tv_enc_funcs = {
>> @@ -1515,6 +1464,7 @@ intel_tv_init(struct drm_i915_private *dev_priv)
>> u32 tv_dac_on, tv_dac_off, save_tv_dac;
>> const char *tv_format_names[ARRAY_SIZE(tv_modes)];
>> int i, initial_mode = 0;
>> + struct drm_connector_state *state;
>>
>> if ((I915_READ(TV_CTL) & TV_FUSE_STATE_MASK) == TV_FUSE_STATE_DISABLED)
>> return;
>> @@ -1560,6 +1510,7 @@ intel_tv_init(struct drm_i915_private *dev_priv)
>>
>> intel_encoder = &intel_tv->base;
>> connector = &intel_connector->base;
>> + state = connector->state;
>>
>> /* The documentation, for the older chipsets at least, recommend
>> * using a polling method rather than hotplug detection for TVs.
>> @@ -1597,12 +1548,12 @@ intel_tv_init(struct drm_i915_private *dev_priv)
>> intel_tv->type = DRM_MODE_CONNECTOR_Unknown;
>>
>> /* BIOS margin values */
>> - intel_tv->margin[TV_MARGIN_LEFT] = 54;
>> - intel_tv->margin[TV_MARGIN_TOP] = 36;
>> - intel_tv->margin[TV_MARGIN_RIGHT] = 46;
>> - intel_tv->margin[TV_MARGIN_BOTTOM] = 37;
>> + state->tv.margins.left = 54;
>> + state->tv.margins.top = 36;
>> + state->tv.margins.right = 46;
>> + state->tv.margins.bottom = 37;
>>
>> - intel_tv->tv_format = tv_modes[initial_mode].name;
>> + state->tv.mode = initial_mode;
>>
>> drm_connector_helper_add(connector, &intel_tv_connector_helper_funcs);
>> connector->interlace_allowed = false;
>> @@ -1616,17 +1567,17 @@ intel_tv_init(struct drm_i915_private *dev_priv)
>> tv_format_names);
>>
>> drm_object_attach_property(&connector->base, dev->mode_config.tv_mode_property,
>> - initial_mode);
>> + state->tv.mode);
>> drm_object_attach_property(&connector->base,
>> dev->mode_config.tv_left_margin_property,
>> - intel_tv->margin[TV_MARGIN_LEFT]);
>> + state->tv.margins.left);
>> drm_object_attach_property(&connector->base,
>> dev->mode_config.tv_top_margin_property,
>> - intel_tv->margin[TV_MARGIN_TOP]);
>> + state->tv.margins.top);
>> drm_object_attach_property(&connector->base,
>> dev->mode_config.tv_right_margin_property,
>> - intel_tv->margin[TV_MARGIN_RIGHT]);
>> + state->tv.margins.right);
>> drm_object_attach_property(&connector->base,
>> dev->mode_config.tv_bottom_margin_property,
>> - intel_tv->margin[TV_MARGIN_BOTTOM]);
>> + state->tv.margins.bottom);
> Another opportunity for a helper to attach the tw mode properties with
> correct defaults and all that. Hm, on that ... should we have an
> attach_prop function which doesn't require the initial value, since with
> atomic that's not needed?
Yeah perhaps, although we could just initialize to 0 here just fine with the atomic getproperty.
In fact probably even before this patch, since I believe it's broken with i915 being a atomic driver..
~Maarten
More information about the Intel-gfx
mailing list