[Intel-gfx] [PATCH v5 04/11] drm/i915: Add plumbing for digital connector state, v3.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Tue Apr 25 11:55:28 UTC 2017
Some atomic properties are common between the various kinds of
connectors, for example a lot of them use panel fitting mode.
It makes sense to put a lot of it in a common place, so each
connector can use it while they're being converted.
Implement the properties required for the connectors:
- scaling mode property
- force audio property
- broadcast rgb
- aspect ratio
While at it, make clear that intel_digital_connector_atomic_get_property
is a hack that has to be removed when all connector properties
are converted to atomic.
Changes since v1:
- Scaling mode and aspect ratio are partly handled in core now.
Changes since v2:
- Split out the scaling mode / aspect ratio changes to a preparation
patch.
- Use mode_changed for panel fitter, changes to this property
are checked by fastset.
- Allowed_scaling_modes is removed, handled through core now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/intel_atomic.c | 131 +++++++++++++++++++++++++++++++++--
drivers/gpu/drm/i915/intel_display.c | 14 +++-
drivers/gpu/drm/i915/intel_drv.h | 23 ++++++
3 files changed, 159 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 50fb1f76cc5f..182909f266f5 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -36,7 +36,7 @@
#include "intel_drv.h"
/**
- * intel_connector_atomic_get_property - fetch connector property value
+ * intel_connector_atomic_get_property - fetch legacy connector property value
* @connector: connector to fetch property for
* @state: state containing the property value
* @property: property to look up
@@ -45,12 +45,14 @@
* The DRM core does not store shadow copies of properties for
* atomic-capable drivers. This entrypoint is used to fetch
* the current value of a driver-specific connector property.
+ *
+ * This is a intermediary solution until all connectors are
+ * converted to support full atomic properties.
*/
-int
-intel_connector_atomic_get_property(struct drm_connector *connector,
- const struct drm_connector_state *state,
- struct drm_property *property,
- uint64_t *val)
+int intel_connector_atomic_get_property(struct drm_connector *connector,
+ const struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t *val)
{
int i;
@@ -73,7 +75,122 @@ intel_connector_atomic_get_property(struct drm_connector *connector,
return -EINVAL;
}
-/*
+/**
+ * intel_digital_connector_atomic_get_property - hook for connector->atomic_get_property.
+ * @connector: Connector to get the property for.
+ * @state: Connector state to retrieve the property from.
+ * @property: Property to retrieve.
+ * @val: Return value for the property.
+ *
+ * Returns the atomic property value for a digital connector.
+ */
+int intel_digital_connector_atomic_get_property(struct drm_connector *connector,
+ const struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t *val)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_digital_connector_state *intel_conn_state =
+ to_intel_digital_connector_state(state);
+
+ if (property == dev_priv->force_audio_property)
+ *val = intel_conn_state->force_audio;
+ else if (property == dev_priv->broadcast_rgb_property)
+ *val = intel_conn_state->broadcast_rgb;
+ else {
+ DRM_DEBUG_ATOMIC("Unknown property %s\n", property->name);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * intel_digital_connector_atomic_set_property - hook for connector->atomic_set_property.
+ * @connector: Connector to set the property for.
+ * @state: Connector state to set the property on.
+ * @property: Property to set.
+ * @val: New value for the property.
+ *
+ * Sets the atomic property value for a digital connector.
+ */
+int intel_digital_connector_atomic_set_property(struct drm_connector *connector,
+ struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t val)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_digital_connector_state *intel_conn_state =
+ to_intel_digital_connector_state(state);
+
+ if (property == dev_priv->force_audio_property) {
+ intel_conn_state->force_audio = val;
+ return 0;
+ }
+
+ if (property == dev_priv->broadcast_rgb_property) {
+ intel_conn_state->broadcast_rgb = val;
+ return 0;
+ }
+
+ DRM_DEBUG_ATOMIC("Unknown property %s\n", property->name);
+ return -EINVAL;
+}
+
+int intel_digital_connector_atomic_check(struct drm_connector *conn,
+ struct drm_connector_state *new_state)
+{
+ struct intel_digital_connector_state *new_conn_state =
+ to_intel_digital_connector_state(new_state);
+ struct drm_connector_state *old_state =
+ drm_atomic_get_old_connector_state(new_state->state, conn);
+ struct intel_digital_connector_state *old_conn_state =
+ to_intel_digital_connector_state(old_state);
+ struct drm_crtc_state *crtc_state;
+
+ if (!new_state->crtc)
+ return 0;
+
+ crtc_state = drm_atomic_get_new_crtc_state(new_state->state, new_state->crtc);
+
+ /*
+ * These properties are handled by fastset, and might not end
+ * up in a modeset.
+ */
+ if (new_conn_state->force_audio != old_conn_state->force_audio ||
+ new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb ||
+ new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio ||
+ new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode)
+ crtc_state->mode_changed = true;
+
+ return 0;
+}
+
+/**
+ * intel_digital_connector_duplicate_state - duplicate connector state
+ * @connector: digital connector
+ *
+ * Allocates and returns a copy of the connector state (both common and
+ * digital connector specific) for the specified connector.
+ *
+ * Returns: The newly allocated connector state, or NULL on failure.
+ */
+struct drm_connector_state *
+intel_digital_connector_duplicate_state(struct drm_connector *connector)
+{
+ struct intel_digital_connector_state *state;
+
+ state = kmemdup(connector->state, sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return NULL;
+
+ __drm_atomic_helper_connector_duplicate_state(connector, &state->base);
+ return &state->base;
+}
+
+/**
* intel_crtc_duplicate_state - duplicate crtc state
* @crtc: drm crtc
*
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 85b9e2f521a0..108122daa807 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5956,11 +5956,21 @@ static void intel_connector_verify_state(struct intel_connector *connector)
int intel_connector_init(struct intel_connector *connector)
{
- drm_atomic_helper_connector_reset(&connector->base);
+ struct intel_digital_connector_state *conn_state;
- if (!connector->base.state)
+ /*
+ * Allocate enough memory to hold intel_digital_connector_state,
+ * This might be a few bytes too many, but for connectors that don't
+ * need it we'll free the state and allocate a smaller one on the first
+ * succesful commit anyway.
+ */
+ conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL);
+ if (!conn_state)
return -ENOMEM;
+ __drm_atomic_helper_connector_reset(&connector->base,
+ &conn_state->base);
+
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f44dd29f4f79..14bf8f6399f3 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -331,6 +331,15 @@ struct intel_connector {
struct work_struct modeset_retry_work;
};
+struct intel_digital_connector_state {
+ struct drm_connector_state base;
+
+ enum hdmi_force_audio force_audio;
+ int broadcast_rgb;
+};
+
+#define to_intel_digital_connector_state(x) container_of(x, struct intel_digital_connector_state, base)
+
struct dpll {
/* given values */
int n;
@@ -1888,6 +1897,20 @@ int intel_connector_atomic_get_property(struct drm_connector *connector,
const struct drm_connector_state *state,
struct drm_property *property,
uint64_t *val);
+
+int intel_digital_connector_atomic_get_property(struct drm_connector *connector,
+ const struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t *val);
+int intel_digital_connector_atomic_set_property(struct drm_connector *connector,
+ struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t val);
+int intel_digital_connector_atomic_check(struct drm_connector *conn,
+ struct drm_connector_state *new_state);
+struct drm_connector_state *
+intel_digital_connector_duplicate_state(struct drm_connector *connector);
+
struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);
void intel_crtc_destroy_state(struct drm_crtc *crtc,
struct drm_crtc_state *state);
--
2.7.4
More information about the Intel-gfx
mailing list