[Intel-gfx] [PATCH v6 12/15] drm/i915/perf: Add OA unit support for Gen 8+

Lionel Landwerlin lionel.g.landwerlin at intel.com
Tue Apr 25 16:20:32 UTC 2017


Hey Matt,

This commit had your reviewed-by on v4, are you still okay with it?

Thanks!

-
Lionel

On 24/04/17 11:49, Lionel Landwerlin wrote:
> From: Robert Bragg <robert at sixbynine.org>
>
> Enables access to OA unit metrics for BDW, CHV, SKL and BXT which all
> share (more-or-less) the same OA unit design.
>
> Of particular note in comparison to Haswell: some OA unit HW config
> state has become per-context state and as a consequence it is somewhat
> more complicated to manage synchronous state changes from the cpu while
> there's no guarantee of what context (if any) is currently actively
> running on the gpu.
>
> The periodic sampling frequency which can be particularly useful for
> system-wide analysis (as opposed to command stream synchronised
> MI_REPORT_PERF_COUNT commands) is perhaps the most surprising state to
> have become per-context save and restored (while the OABUFFER
> destination is still a shared, system-wide resource).
>
> This support for gen8+ takes care to consider a number of timing
> challenges involved in synchronously updating per-context state
> primarily by programming all config state from the cpu and updating all
> current and saved contexts synchronously while the OA unit is still
> disabled.
>
> The driver intentionally avoids depending on command streamer
> programming to update OA state considering the lack of synchronization
> between the automatic loading of OACTXCONTROL state (that includes the
> periodic sampling state and enable state) on context restore and the
> parsing of any general purpose BB the driver can control. I.e. this
> implementation is careful to avoid the possibility of a context restore
> temporarily enabling any out-of-date periodic sampling state. In
> addition to the risk of transiently-out-of-date state being loaded
> automatically; there are also internal HW latencies involved in the
> loading of MUX configurations which would be difficult to account for
> from the command streamer (and we only want to enable the unit when once
> the MUX configuration is complete).
>
> Since the Gen8+ OA unit design no longer supports clock gating the unit
> off for a single given context (which effectively stopped any progress
> of counters while any other context was running) and instead supports
> tagging OA reports with a context ID for filtering on the CPU, it means
> we can no longer hide the system-wide progress of counters from a
> non-privileged application only interested in metrics for its own
> context. Although we could theoretically try and subtract the progress
> of other contexts before forwarding reports via read() we aren't in a
> position to filter reports captured via MI_REPORT_PERF_COUNT commands.
> As a result, for Gen8+, we always require the
> dev.i915.perf_stream_paranoid to be unset for any access to OA metrics
> if not root.
>
> v5: Drain submitted requests when enabling metric set to ensure no
>      lite-restore erases the context image we just updated (Lionel)
>
> v6: In addition to drain, switch to kernel context & update all
>      context in place (Chris)
>
> Signed-off-by: Robert Bragg <robert at sixbynine.org>
> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin at intel.com>
> Reviewed-by: Matthew Auld <matthew.auld at intel.com> \o/
> ---
>   drivers/gpu/drm/i915/i915_drv.h  |  45 +-
>   drivers/gpu/drm/i915/i915_perf.c | 957 ++++++++++++++++++++++++++++++++++++---
>   drivers/gpu/drm/i915/i915_reg.h  |  22 +
>   drivers/gpu/drm/i915/intel_lrc.c |   2 +
>   include/uapi/drm/i915_drm.h      |  19 +-
>   5 files changed, 952 insertions(+), 93 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index ffa1fc5eddfd..676b1227067c 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2064,9 +2064,17 @@ struct i915_oa_ops {
>   	void (*init_oa_buffer)(struct drm_i915_private *dev_priv);
>
>   	/**
> -	 * @enable_metric_set: Applies any MUX configuration to set up the
> -	 * Boolean and Custom (B/C) counters that are part of the counter
> -	 * reports being sampled. May apply system constraints such as
> +	 * @select_metric_set: The auto generated code that checks whether a
> +	 * requested OA config is applicable to the system and if so sets up
> +	 * the mux, oa and flex eu register config pointers according to the
> +	 * current dev_priv->perf.oa.metrics_set.
> +	 */
> +	int (*select_metric_set)(struct drm_i915_private *dev_priv);
> +
> +	/**
> +	 * @enable_metric_set: Selects and applies any MUX configuration to set
> +	 * up the Boolean and Custom (B/C) counters that are part of the
> +	 * counter reports being sampled. May apply system constraints such as
>   	 * disabling EU clock gating as required.
>   	 */
>   	int (*enable_metric_set)(struct drm_i915_private *dev_priv);
> @@ -2097,20 +2105,13 @@ struct i915_oa_ops {
>   		    size_t *offset);
>
>   	/**
> -	 * @oa_buffer_check: Check for OA buffer data + update tail
> -	 *
> -	 * This is either called via fops or the poll check hrtimer (atomic
> -	 * ctx) without any locks taken.
> +	 * @oa_hw_tail_read: read the OA tail pointer register
>   	 *
> -	 * It's safe to read OA config state here unlocked, assuming that this
> -	 * is only called while the stream is enabled, while the global OA
> -	 * configuration can't be modified.
> -	 *
> -	 * Efficiency is more important than avoiding some false positives
> -	 * here, which will be handled gracefully - likely resulting in an
> -	 * %EAGAIN error for userspace.
> +	 * In particular this enables us to share all the fiddly code for
> +	 * handling the OA unit tail pointer race that affects multiple
> +	 * generations.
>   	 */
> -	bool (*oa_buffer_check)(struct drm_i915_private *dev_priv);
> +	u32 (*oa_hw_tail_read)(struct drm_i915_private *dev_priv);
>   };
>
>   struct intel_cdclk_state {
> @@ -2472,6 +2473,7 @@ struct drm_i915_private {
>   			struct {
>   				struct i915_vma *vma;
>   				u8 *vaddr;
> +				u32 last_ctx_id;
>   				int format;
>   				int format_size;
>
> @@ -2541,6 +2543,14 @@ struct drm_i915_private {
>   			} oa_buffer;
>
>   			u32 gen7_latched_oastatus1;
> +			u32 ctx_oactxctrl_offset;
> +			u32 ctx_flexeu0_offset;
> +
> +			/* The RPT_ID/reason field for Gen8+ includes a bit
> +			 * to determine if the CTX ID in the report is valid
> +			 * but the specific bit differs between Gen 8 and 9
> +			 */
> +			u32 gen8_valid_ctx_bit;
>
>   			struct i915_oa_ops ops;
>   			const struct i915_oa_format *oa_formats;
> @@ -2851,6 +2861,8 @@ intel_info(const struct drm_i915_private *dev_priv)
>   #define IS_KBL_ULX(dev_priv)	(INTEL_DEVID(dev_priv) == 0x590E || \
>   				 INTEL_DEVID(dev_priv) == 0x5915 || \
>   				 INTEL_DEVID(dev_priv) == 0x591E)
> +#define IS_SKL_GT2(dev_priv)	(IS_SKYLAKE(dev_priv) && \
> +				 (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0010)
>   #define IS_SKL_GT3(dev_priv)	(IS_SKYLAKE(dev_priv) && \
>   				 (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0020)
>   #define IS_SKL_GT4(dev_priv)	(IS_SKYLAKE(dev_priv) && \
> @@ -3615,6 +3627,9 @@ i915_gem_context_lookup_timeline(struct i915_gem_context *ctx,
>
>   int i915_perf_open_ioctl(struct drm_device *dev, void *data,
>   			 struct drm_file *file);
> +void i915_oa_init_reg_state(struct intel_engine_cs *engine,
> +			    struct i915_gem_context *ctx,
> +			    uint32_t *reg_state);
>
>   /* i915_gem_evict.c */
>   int __must_check i915_gem_evict_something(struct i915_address_space *vm,
> diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
> index 3277a52ce98e..f2688dee5a03 100644
> --- a/drivers/gpu/drm/i915/i915_perf.c
> +++ b/drivers/gpu/drm/i915/i915_perf.c
> @@ -196,6 +196,12 @@
>
>   #include "i915_drv.h"
>   #include "i915_oa_hsw.h"
> +#include "i915_oa_bdw.h"
> +#include "i915_oa_chv.h"
> +#include "i915_oa_sklgt2.h"
> +#include "i915_oa_sklgt3.h"
> +#include "i915_oa_sklgt4.h"
> +#include "i915_oa_bxt.h"
>
>   /* HW requires this to be a power of two, between 128k and 16M, though driver
>    * is currently generally designed assuming the largest 16M size is used such
> @@ -215,7 +221,7 @@
>    *
>    * Although this can be observed explicitly while copying reports to userspace
>    * by checking for a zeroed report-id field in tail reports, we want to account
> - * for this earlier, as part of the _oa_buffer_check to avoid lots of redundant
> + * for this earlier, as part of the oa_buffer_check to avoid lots of redundant
>    * read() attempts.
>    *
>    * In effect we define a tail pointer for reading that lags the real tail
> @@ -237,7 +243,7 @@
>    * indicates that an updated tail pointer is needed.
>    *
>    * Most of the implementation details for this workaround are in
> - * gen7_oa_buffer_check_unlocked() and gen7_appand_oa_reports()
> + * oa_buffer_check_unlocked() and _append_oa_reports()
>    *
>    * Note for posterity: previously the driver used to define an effective tail
>    * pointer that lagged the real pointer by a 'tail margin' measured in bytes
> @@ -272,6 +278,13 @@ static u32 i915_perf_stream_paranoid = true;
>
>   #define INVALID_CTX_ID 0xffffffff
>
> +/* On Gen8+ automatically triggered OA reports include a 'reason' field... */
> +#define OAREPORT_REASON_MASK           0x3f
> +#define OAREPORT_REASON_SHIFT          19
> +#define OAREPORT_REASON_TIMER          (1<<0)
> +#define OAREPORT_REASON_CTX_SWITCH     (1<<3)
> +#define OAREPORT_REASON_CLK_RATIO      (1<<5)
> +
>
>   /* For sysctl proc_dointvec_minmax of i915_oa_max_sample_rate
>    *
> @@ -303,6 +316,13 @@ static struct i915_oa_format hsw_oa_formats[I915_OA_FORMAT_MAX] = {
>   	[I915_OA_FORMAT_C4_B8]	    = { 7, 64 },
>   };
>
> +static struct i915_oa_format gen8_plus_oa_formats[I915_OA_FORMAT_MAX] = {
> +	[I915_OA_FORMAT_A12]		    = { 0, 64 },
> +	[I915_OA_FORMAT_A12_B8_C8]	    = { 2, 128 },
> +	[I915_OA_FORMAT_A32u40_A4u32_B8_C8] = { 5, 256 },
> +	[I915_OA_FORMAT_C4_B8]		    = { 7, 64 },
> +};
> +
>   #define SAMPLE_OA_REPORT      (1<<0)
>
>   /**
> @@ -332,8 +352,20 @@ struct perf_open_properties {
>   	int oa_period_exponent;
>   };
>
> +static u32 gen8_oa_hw_tail_read(struct drm_i915_private *dev_priv)
> +{
> +	return I915_READ(GEN8_OATAILPTR) & GEN8_OATAILPTR_MASK;
> +}
> +
> +static u32 gen7_oa_hw_tail_read(struct drm_i915_private *dev_priv)
> +{
> +	u32 oastatus1 = I915_READ(GEN7_OASTATUS1);
> +
> +	return oastatus1 & GEN7_OASTATUS1_TAIL_MASK;
> +}
> +
>   /**
> - * gen7_oa_buffer_check_unlocked - check for data and update tail ptr state
> + * oa_buffer_check_unlocked - check for data and update tail ptr state
>    * @dev_priv: i915 device instance
>    *
>    * This is either called via fops (for blocking reads in user ctx) or the poll
> @@ -356,12 +388,11 @@ struct perf_open_properties {
>    *
>    * Returns: %true if the OA buffer contains data, else %false
>    */
> -static bool gen7_oa_buffer_check_unlocked(struct drm_i915_private *dev_priv)
> +static bool oa_buffer_check_unlocked(struct drm_i915_private *dev_priv)
>   {
>   	int report_size = dev_priv->perf.oa.oa_buffer.format_size;
>   	unsigned long flags;
>   	unsigned int aged_idx;
> -	u32 oastatus1;
>   	u32 head, hw_tail, aged_tail, aging_tail;
>   	u64 now;
>
> @@ -381,8 +412,7 @@ static bool gen7_oa_buffer_check_unlocked(struct drm_i915_private *dev_priv)
>   	aged_tail = dev_priv->perf.oa.oa_buffer.tails[aged_idx].offset;
>   	aging_tail = dev_priv->perf.oa.oa_buffer.tails[!aged_idx].offset;
>
> -	oastatus1 = I915_READ(GEN7_OASTATUS1);
> -	hw_tail = oastatus1 & GEN7_OASTATUS1_TAIL_MASK;
> +	hw_tail = dev_priv->perf.oa.ops.oa_hw_tail_read(dev_priv);
>
>   	/* The tail pointer increases in 64 byte increments,
>   	 * not in report_size steps...
> @@ -404,6 +434,7 @@ static bool gen7_oa_buffer_check_unlocked(struct drm_i915_private *dev_priv)
>   	if (aging_tail != INVALID_TAIL_PTR &&
>   	    ((now - dev_priv->perf.oa.oa_buffer.aging_timestamp) >
>   	     OA_TAIL_MARGIN_NSEC)) {
> +
>   		aged_idx ^= 1;
>   		dev_priv->perf.oa.oa_buffer.aged_tail_idx = aged_idx;
>
> @@ -553,6 +584,287 @@ static int append_oa_sample(struct i915_perf_stream *stream,
>    *
>    * Returns: 0 on success, negative error code on failure.
>    */
> +static int gen8_append_oa_reports(struct i915_perf_stream *stream,
> +				  char __user *buf,
> +				  size_t count,
> +				  size_t *offset)
> +{
> +	struct drm_i915_private *dev_priv = stream->dev_priv;
> +	int report_size = dev_priv->perf.oa.oa_buffer.format_size;
> +	u8 *oa_buf_base = dev_priv->perf.oa.oa_buffer.vaddr;
> +	u32 gtt_offset = i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma);
> +	u32 mask = (OA_BUFFER_SIZE - 1);
> +	size_t start_offset = *offset;
> +	unsigned long flags;
> +	unsigned int aged_tail_idx;
> +	u32 head, tail;
> +	u32 taken;
> +	int ret = 0;
> +
> +	if (WARN_ON(!stream->enabled))
> +		return -EIO;
> +
> +	spin_lock_irqsave(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags);
> +
> +	head = dev_priv->perf.oa.oa_buffer.head;
> +	aged_tail_idx = dev_priv->perf.oa.oa_buffer.aged_tail_idx;
> +	tail = dev_priv->perf.oa.oa_buffer.tails[aged_tail_idx].offset;
> +
> +	spin_unlock_irqrestore(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags);
> +
> +	/* An invalid tail pointer here means we're still waiting for the poll
> +	 * hrtimer callback to give us a pointer
> +	 */
> +	if (tail == INVALID_TAIL_PTR)
> +		return -EAGAIN;
> +
> +	/* NB: oa_buffer.head/tail include the gtt_offset which we don't want
> +	 * while indexing relative to oa_buf_base.
> +	 */
> +	head -= gtt_offset;
> +	tail -= gtt_offset;
> +
> +	/* An out of bounds or misaligned head or tail pointer implies a driver
> +	 * bug since we validate + align the tail pointers we read from the
> +	 * hardware and we are in full control of the head pointer which should
> +	 * only be incremented by multiples of the report size (notably also
> +	 * all a power of two).
> +	 */
> +	if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size ||
> +		      tail > OA_BUFFER_SIZE || tail % report_size,
> +		      "Inconsistent OA buffer pointers: head = %u, tail = %u\n",
> +		      head, tail))
> +		return -EIO;
> +
> +
> +	for (/* none */;
> +	     (taken = OA_TAKEN(tail, head));
> +	     head = (head + report_size) & mask) {
> +		u8 *report = oa_buf_base + head;
> +		u32 *report32 = (void *)report;
> +		u32 ctx_id;
> +		u32 reason;
> +
> +		/* All the report sizes factor neatly into the buffer
> +		 * size so we never expect to see a report split
> +		 * between the beginning and end of the buffer.
> +		 *
> +		 * Given the initial alignment check a misalignment
> +		 * here would imply a driver bug that would result
> +		 * in an overrun.
> +		 */
> +		if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) {
> +			DRM_ERROR("Spurious OA head ptr: non-integral report offset\n");
> +			break;
> +		}
> +
> +		/* The reason field includes flags identifying what
> +		 * triggered this specific report (mostly timer
> +		 * triggered or e.g. due to a context switch).
> +		 *
> +		 * This field is never expected to be zero so we can
> +		 * check that the report isn't invalid before copying
> +		 * it to userspace...
> +		 */
> +		reason = ((report32[0] >> OAREPORT_REASON_SHIFT) &
> +			  OAREPORT_REASON_MASK);
> +		if (reason == 0) {
> +			if (__ratelimit(&dev_priv->perf.oa.spurious_report_rs))
> +				DRM_NOTE("Skipping spurious, invalid OA report\n");
> +			continue;
> +		}
> +
> +		/* XXX: Just keep the lower 21 bits for now since I'm not
> +		 * entirely sure if the HW touches any of the higher bits in
> +		 * this field
> +		 */
> +		ctx_id = report32[2] & 0x1fffff;
> +
> +		/* Squash whatever is in the CTX_ID field if it's marked as
> +		 * invalid to be sure we avoid false-positive, single-context
> +		 * filtering below...
> +		 *
> +		 * Note: that we don't clear the valid_ctx_bit so userspace can
> +		 * understand that the ID has been squashed by the kernel.
> +		 */
> +		if (!(report32[0] & dev_priv->perf.oa.gen8_valid_ctx_bit))
> +			ctx_id = report32[2] = INVALID_CTX_ID;
> +
> +		/* NB: For Gen 8 the OA unit no longer supports clock gating
> +		 * off for a specific context and the kernel can't securely
> +		 * stop the counters from updating as system-wide / global
> +		 * values.
> +		 *
> +		 * Automatic reports now include a context ID so reports can be
> +		 * filtered on the cpu but it's not worth trying to
> +		 * automatically subtract/hide counter progress for other
> +		 * contexts while filtering since we can't stop userspace
> +		 * issuing MI_REPORT_PERF_COUNT commands which would still
> +		 * provide a side-band view of the real values.
> +		 *
> +		 * To allow userspace (such as Mesa/GL_INTEL_performance_query)
> +		 * to normalize counters for a single filtered context then it
> +		 * needs be forwarded bookend context-switch reports so that it
> +		 * can track switches in between MI_REPORT_PERF_COUNT commands
> +		 * and can itself subtract/ignore the progress of counters
> +		 * associated with other contexts. Note that the hardware
> +		 * automatically triggers reports when switching to a new
> +		 * context which are tagged with the ID of the newly active
> +		 * context. To avoid the complexity (and likely fragility) of
> +		 * reading ahead while parsing reports to try and minimize
> +		 * forwarding redundant context switch reports (i.e. between
> +		 * other, unrelated contexts) we simply elect to forward them
> +		 * all.
> +		 *
> +		 * We don't rely solely on the reason field to identify context
> +		 * switches since it's not-uncommon for periodic samples to
> +		 * identify a switch before any 'context switch' report.
> +		 */
> +		if (!dev_priv->perf.oa.exclusive_stream->ctx ||
> +		    dev_priv->perf.oa.specific_ctx_id == ctx_id ||
> +		    (dev_priv->perf.oa.oa_buffer.last_ctx_id ==
> +		     dev_priv->perf.oa.specific_ctx_id) ||
> +		    reason & OAREPORT_REASON_CTX_SWITCH) {
> +
> +			/* While filtering for a single context we avoid
> +			 * leaking the IDs of other contexts.
> +			 */
> +			if (dev_priv->perf.oa.exclusive_stream->ctx &&
> +			    dev_priv->perf.oa.specific_ctx_id != ctx_id) {
> +				report32[2] = INVALID_CTX_ID;
> +			}
> +
> +			ret = append_oa_sample(stream, buf, count, offset,
> +					       report);
> +			if (ret)
> +				break;
> +
> +			dev_priv->perf.oa.oa_buffer.last_ctx_id = ctx_id;
> +		}
> +
> +		/* The above reason field sanity check is based on
> +		 * the assumption that the OA buffer is initially
> +		 * zeroed and we reset the field after copying so the
> +		 * check is still meaningful once old reports start
> +		 * being overwritten.
> +		 */
> +		report32[0] = 0;
> +	}
> +
> +	if (start_offset != *offset) {
> +		spin_lock_irqsave(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags);
> +
> +		/* We removed the gtt_offset for the copy loop above, indexing
> +		 * relative to oa_buf_base so put back here...
> +		 */
> +		head += gtt_offset;
> +
> +		I915_WRITE(GEN8_OAHEADPTR, head & GEN8_OAHEADPTR_MASK);
> +		dev_priv->perf.oa.oa_buffer.head = head;
> +
> +		spin_unlock_irqrestore(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags);
> +	}
> +
> +	return ret;
> +}
> +
> +/**
> + * gen8_oa_read - copy status records then buffered OA reports
> + * @stream: An i915-perf stream opened for OA metrics
> + * @buf: destination buffer given by userspace
> + * @count: the number of bytes userspace wants to read
> + * @offset: (inout): the current position for writing into @buf
> + *
> + * Checks OA unit status registers and if necessary appends corresponding
> + * status records for userspace (such as for a buffer full condition) and then
> + * initiate appending any buffered OA reports.
> + *
> + * Updates @offset according to the number of bytes successfully copied into
> + * the userspace buffer.
> + *
> + * NB: some data may be successfully copied to the userspace buffer
> + * even if an error is returned, and this is reflected in the
> + * updated @offset.
> + *
> + * Returns: zero on success or a negative error code
> + */
> +static int gen8_oa_read(struct i915_perf_stream *stream,
> +			char __user *buf,
> +			size_t count,
> +			size_t *offset)
> +{
> +	struct drm_i915_private *dev_priv = stream->dev_priv;
> +	u32 oastatus;
> +	int ret;
> +
> +	if (WARN_ON(!dev_priv->perf.oa.oa_buffer.vaddr))
> +		return -EIO;
> +
> +	oastatus = I915_READ(GEN8_OASTATUS);
> +
> +	/* We treat OABUFFER_OVERFLOW as a significant error:
> +	 *
> +	 * Although theoretically we could handle this more gracefully
> +	 * sometimes, some Gens don't correctly suppress certain
> +	 * automatically triggered reports in this condition and so we
> +	 * have to assume that old reports are now being trampled
> +	 * over.
> +	 *
> +	 * Considering how we don't currently give userspace control
> +	 * over the OA buffer size and always configure a large 16MB
> +	 * buffer, then a buffer overflow does anyway likely indicate
> +	 * that something has gone quite badly wrong.
> +	 */
> +	if (oastatus & GEN8_OASTATUS_OABUFFER_OVERFLOW) {
> +		ret = append_oa_status(stream, buf, count, offset,
> +				       DRM_I915_PERF_RECORD_OA_BUFFER_LOST);
> +		if (ret)
> +			return ret;
> +
> +		DRM_DEBUG("OA buffer overflow (exponent = %d): force restart\n",
> +			  dev_priv->perf.oa.period_exponent);
> +
> +		dev_priv->perf.oa.ops.oa_disable(dev_priv);
> +		dev_priv->perf.oa.ops.oa_enable(dev_priv);
> +
> +		/* Note: .oa_enable() is expected to re-init the oabuffer
> +		 * and reset GEN8_OASTATUS for us
> +		 */
> +		oastatus = I915_READ(GEN8_OASTATUS);
> +	}
> +
> +	if (oastatus & GEN8_OASTATUS_REPORT_LOST) {
> +		ret = append_oa_status(stream, buf, count, offset,
> +				       DRM_I915_PERF_RECORD_OA_REPORT_LOST);
> +		if (ret)
> +			return ret;
> +		I915_WRITE(GEN8_OASTATUS,
> +			   oastatus & ~GEN8_OASTATUS_REPORT_LOST);
> +	}
> +
> +	return gen8_append_oa_reports(stream, buf, count, offset);
> +}
> +
> +/**
> + * Copies all buffered OA reports into userspace read() buffer.
> + * @stream: An i915-perf stream opened for OA metrics
> + * @buf: destination buffer given by userspace
> + * @count: the number of bytes userspace wants to read
> + * @offset: (inout): the current position for writing into @buf
> + *
> + * Notably any error condition resulting in a short read (-%ENOSPC or
> + * -%EFAULT) will be returned even though one or more records may
> + * have been successfully copied. In this case it's up to the caller
> + * to decide if the error should be squashed before returning to
> + * userspace.
> + *
> + * Note: reports are consumed from the head, and appended to the
> + * tail, so the tail chases the head?... If you think that's mad
> + * and back-to-front you're not alone, but this follows the
> + * Gen PRM naming convention.
> + *
> + * Returns: 0 on success, negative error code on failure.
> + */
>   static int gen7_append_oa_reports(struct i915_perf_stream *stream,
>   				  char __user *buf,
>   				  size_t count,
> @@ -733,7 +1045,8 @@ static int gen7_oa_read(struct i915_perf_stream *stream,
>   		if (ret)
>   			return ret;
>
> -		DRM_DEBUG("OA buffer overflow: force restart\n");
> +		DRM_DEBUG("OA buffer overflow (exponent = %d): force restart\n",
> +			  dev_priv->perf.oa.period_exponent);
>
>   		dev_priv->perf.oa.ops.oa_disable(dev_priv);
>   		dev_priv->perf.oa.ops.oa_enable(dev_priv);
> @@ -776,7 +1089,7 @@ static int i915_oa_wait_unlocked(struct i915_perf_stream *stream)
>   		return -EIO;
>
>   	return wait_event_interruptible(dev_priv->perf.oa.poll_wq,
> -					dev_priv->perf.oa.ops.oa_buffer_check(dev_priv));
> +					oa_buffer_check_unlocked(dev_priv));
>   }
>
>   /**
> @@ -833,33 +1146,37 @@ static int i915_oa_read(struct i915_perf_stream *stream,
>   static int oa_get_render_ctx_id(struct i915_perf_stream *stream)
>   {
>   	struct drm_i915_private *dev_priv = stream->dev_priv;
> -	struct intel_engine_cs *engine = dev_priv->engine[RCS];
> -	int ret;
>
> -	ret = i915_mutex_lock_interruptible(&dev_priv->drm);
> -	if (ret)
> -		return ret;
> +	if (i915.enable_execlists)
> +		dev_priv->perf.oa.specific_ctx_id = stream->ctx->hw_id;
> +	else {
> +		struct intel_engine_cs *engine = dev_priv->engine[RCS];
> +		int ret;
>
> -	/* As the ID is the gtt offset of the context's vma we pin
> -	 * the vma to ensure the ID remains fixed.
> -	 *
> -	 * NB: implied RCS engine...
> -	 */
> -	ret = engine->context_pin(engine, stream->ctx);
> -	if (ret)
> -		goto unlock;
> +		ret = i915_mutex_lock_interruptible(&dev_priv->drm);
> +		if (ret)
> +			return ret;
>
> -	/* Explicitly track the ID (instead of calling i915_ggtt_offset()
> -	 * on the fly) considering the difference with gen8+ and
> -	 * execlists
> -	 */
> -	dev_priv->perf.oa.specific_ctx_id =
> -		i915_ggtt_offset(stream->ctx->engine[engine->id].state);
> +		/* As the ID is the gtt offset of the context's vma we pin
> +		 * the vma to ensure the ID remains fixed.
> +		 */
> +		ret = engine->context_pin(engine, stream->ctx);
> +		if (ret) {
> +			mutex_unlock(&dev_priv->drm.struct_mutex);
> +			return ret;
> +		}
>
> -unlock:
> -	mutex_unlock(&dev_priv->drm.struct_mutex);
> +		/* Explicitly track the ID (instead of calling
> +		 * i915_ggtt_offset() on the fly) considering the difference
> +		 * with gen8+ and execlists
> +		 */
> +		dev_priv->perf.oa.specific_ctx_id =
> +			i915_ggtt_offset(stream->ctx->engine[engine->id].state);
>
> -	return ret;
> +		mutex_unlock(&dev_priv->drm.struct_mutex);
> +	}
> +
> +	return 0;
>   }
>
>   /**
> @@ -874,12 +1191,16 @@ static void oa_put_render_ctx_id(struct i915_perf_stream *stream)
>   	struct drm_i915_private *dev_priv = stream->dev_priv;
>   	struct intel_engine_cs *engine = dev_priv->engine[RCS];
>
> -	mutex_lock(&dev_priv->drm.struct_mutex);
> +	if (i915.enable_execlists) {
> +		dev_priv->perf.oa.specific_ctx_id = INVALID_CTX_ID;
> +	} else {
> +		mutex_lock(&dev_priv->drm.struct_mutex);
>
> -	dev_priv->perf.oa.specific_ctx_id = INVALID_CTX_ID;
> -	engine->context_unpin(engine, stream->ctx);
> +		dev_priv->perf.oa.specific_ctx_id = INVALID_CTX_ID;
> +		engine->context_unpin(engine, stream->ctx);
>
> -	mutex_unlock(&dev_priv->drm.struct_mutex);
> +		mutex_unlock(&dev_priv->drm.struct_mutex);
> +	}
>   }
>
>   static void
> @@ -969,6 +1290,61 @@ static void gen7_init_oa_buffer(struct drm_i915_private *dev_priv)
>   	dev_priv->perf.oa.pollin = false;
>   }
>
> +static void gen8_init_oa_buffer(struct drm_i915_private *dev_priv)
> +{
> +	u32 gtt_offset = i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags);
> +
> +	I915_WRITE(GEN8_OASTATUS, 0);
> +	I915_WRITE(GEN8_OAHEADPTR, gtt_offset);
> +	dev_priv->perf.oa.oa_buffer.head = gtt_offset;
> +
> +	I915_WRITE(GEN8_OABUFFER_UDW, 0);
> +
> +	/* PRM says:
> +	 *
> +	 *  "This MMIO must be set before the OATAILPTR
> +	 *  register and after the OAHEADPTR register. This is
> +	 *  to enable proper functionality of the overflow
> +	 *  bit."
> +	 */
> +	I915_WRITE(GEN8_OABUFFER, gtt_offset |
> +		   OABUFFER_SIZE_16M | OA_MEM_SELECT_GGTT);
> +	I915_WRITE(GEN8_OATAILPTR, gtt_offset & GEN8_OATAILPTR_MASK);
> +
> +	/* Mark that we need updated tail pointers to read from... */
> +	dev_priv->perf.oa.oa_buffer.tails[0].offset = INVALID_TAIL_PTR;
> +	dev_priv->perf.oa.oa_buffer.tails[1].offset = INVALID_TAIL_PTR;
> +
> +	/* Reset state used to recognise context switches, affecting which
> +	 * reports we will forward to userspace while filtering for a single
> +	 * context.
> +	 */
> +	dev_priv->perf.oa.oa_buffer.last_ctx_id = INVALID_CTX_ID;
> +
> +	spin_unlock_irqrestore(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags);
> +
> +	/* NB: although the OA buffer will initially be allocated
> +	 * zeroed via shmfs (and so this memset is redundant when
> +	 * first allocating), we may re-init the OA buffer, either
> +	 * when re-enabling a stream or in error/reset paths.
> +	 *
> +	 * The reason we clear the buffer for each re-init is for the
> +	 * sanity check in gen8_append_oa_reports() that looks at the
> +	 * reason field to make sure it's non-zero which relies on
> +	 * the assumption that new reports are being written to zeroed
> +	 * memory...
> +	 */
> +	memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, OA_BUFFER_SIZE);
> +
> +	/* Maybe make ->pollin per-stream state if we support multiple
> +	 * concurrent streams in the future.
> +	 */
> +	dev_priv->perf.oa.pollin = false;
> +}
> +
>   static int alloc_oa_buffer(struct drm_i915_private *dev_priv)
>   {
>   	struct drm_i915_gem_object *bo;
> @@ -1113,6 +1489,280 @@ static void hsw_disable_metric_set(struct drm_i915_private *dev_priv)
>   				      ~GT_NOA_ENABLE));
>   }
>
> +/*
> + * From Broadwell PRM, 3D-Media-GPGPU -> Register State Context
> + *
> + * MMIO reads or writes to any of the registers listed in the
> + * “Register State Context image” subsections through HOST/IA
> + * MMIO interface for debug purposes must follow the steps below:
> + *
> + * - SW should set the Force Wakeup bit to prevent GT from entering C6.
> + * - Write 0x2050[31:0] = 0x00010001 (disable sequence).
> + * - Disable IDLE messaging in CS (Write 0x2050[31:0] = 0x00010001).
> + * - BDW:  Poll/Wait for register bits of 0x22AC[6:0] turn to 0x30 value.
> + * - SKL+: Poll/Wait for register bits of 0x22A4[6:0] turn to 0x30 value.
> + * - Read/Write to desired MMIO registers.
> + * - Enable IDLE messaging in CS (Write 0x2050[31:0] = 0x00010000).
> + * - Force Wakeup bit should be reset to enable C6 entry.
> + *
> + * XXX: don't nest or overlap calls to this API, it has no ref
> + * counting to track how many entities require the RCS to be
> + * blocked from being idle.
> + */
> +static int gen8_begin_ctx_mmio(struct drm_i915_private *dev_priv)
> +{
> +	i915_reg_t fsm_reg = INTEL_GEN(dev_priv) > 8 ?
> +		GEN9_RCS_FE_FSM2 : GEN6_RCS_PWR_FSM;
> +	int ret = 0;
> +
> +	/* There's only no active context while idle in execlist mode
> +	 * (though we shouldn't be using this in any other case)
> +	 */
> +	if (WARN_ON(!i915.enable_execlists))
> +		return -EINVAL;
> +
> +	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_RENDER);
> +
> +	I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
> +		   _MASKED_BIT_ENABLE(GEN6_PSMI_SLEEP_MSG_DISABLE));
> +
> +	/* Note: we don't currently have a good handle on the maximum
> +	 * latency for this wake up so while we only need to hold rcs
> +	 * busy from process context we at least keep the waiting
> +	 * interruptible...
> +	 */
> +	ret = intel_wait_for_register(dev_priv, fsm_reg, 0x3f, 0x30, 50);
> +	if (ret == -ETIMEDOUT)
> +		DRM_ERROR("Timeout waiting to be able to begin per-ctx mmio\n");
> +
> +	if (ret)
> +		intel_uncore_forcewake_put(dev_priv, FORCEWAKE_RENDER);
> +
> +	return ret;
> +}
> +
> +static void gen8_end_ctx_mmio(struct drm_i915_private *dev_priv)
> +{
> +	if (WARN_ON(!i915.enable_execlists))
> +		return;
> +
> +	I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
> +		   _MASKED_BIT_DISABLE(GEN6_PSMI_SLEEP_MSG_DISABLE));
> +	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_RENDER);
> +}
> +
> +/* NB: It must always remain pointer safe to run this even if the OA unit
> + * has been disabled.
> + *
> + * It's fine to put out-of-date values into these per-context registers
> + * in the case that the OA unit has been disabled.
> + */
> +static void gen8_update_reg_state_unlocked(struct i915_gem_context *ctx,
> +					   u32 *reg_state)
> +{
> +	struct drm_i915_private *dev_priv = ctx->i915;
> +	const struct i915_oa_reg *flex_regs = dev_priv->perf.oa.flex_regs;
> +	int n_flex_regs = dev_priv->perf.oa.flex_regs_len;
> +	u32 ctx_oactxctrl = dev_priv->perf.oa.ctx_oactxctrl_offset;
> +	u32 ctx_flexeu0 = dev_priv->perf.oa.ctx_flexeu0_offset;
> +	/* The MMIO offsets for Flex EU registers aren't contiguous */
> +	u32 flex_mmio[] = {
> +		i915_mmio_reg_offset(EU_PERF_CNTL0),
> +		i915_mmio_reg_offset(EU_PERF_CNTL1),
> +		i915_mmio_reg_offset(EU_PERF_CNTL2),
> +		i915_mmio_reg_offset(EU_PERF_CNTL3),
> +		i915_mmio_reg_offset(EU_PERF_CNTL4),
> +		i915_mmio_reg_offset(EU_PERF_CNTL5),
> +		i915_mmio_reg_offset(EU_PERF_CNTL6),
> +	};
> +	int i;
> +
> +	reg_state[ctx_oactxctrl] = i915_mmio_reg_offset(GEN8_OACTXCONTROL);
> +	reg_state[ctx_oactxctrl+1] = (dev_priv->perf.oa.period_exponent <<
> +				      GEN8_OA_TIMER_PERIOD_SHIFT) |
> +				     (dev_priv->perf.oa.periodic ?
> +				      GEN8_OA_TIMER_ENABLE : 0) |
> +				     GEN8_OA_COUNTER_RESUME;
> +
> +	for (i = 0; i < ARRAY_SIZE(flex_mmio); i++) {
> +		u32 state_offset = ctx_flexeu0 + i * 2;
> +		u32 mmio = flex_mmio[i];
> +
> +		/* This arbitrary default will select the 'EU FPU0 Pipeline
> +		 * Active' event. In the future it's anticipated that there
> +		 * will be an explicit 'No Event' we can select, but not yet...
> +		 */
> +		u32 value = 0;
> +		int j;
> +
> +		for (j = 0; j < n_flex_regs; j++) {
> +			if (i915_mmio_reg_offset(flex_regs[j].addr) == mmio) {
> +				value = flex_regs[j].value;
> +				break;
> +			}
> +		}
> +
> +		reg_state[state_offset] = mmio;
> +		reg_state[state_offset+1] = value;
> +	}
> +}
> +
> +/* Manages updating the per-context aspects of the OA stream
> + * configuration across all contexts.
> + *
> + * The awkward consideration here is that OACTXCONTROL controls the
> + * exponent for periodic sampling which is primarily used for system
> + * wide profiling where we'd like a consistent sampling period even in
> + * the face of context switches.
> + *
> + * Our approach of updating the register state context (as opposed to
> + * say using a workaround batch buffer) ensures that the hardware
> + * won't automatically reload an out-of-date timer exponent even
> + * transiently before a WA BB could be parsed.
> + *
> + * This function needs to:
> + * - Ensure the currently running context's per-context OA state is
> + *   updated
> + * - Ensure that all existing contexts will have the correct per-context
> + *   OA state if they are scheduled for use.
> + * - Ensure any new contexts will be initialized with the correct
> + *   per-context OA state.
> + *
> + * Note: it's only the RCS/Render context that has any OA state.
> + */
> +static int gen8_configure_all_contexts(struct drm_i915_private *dev_priv)
> +{
> +	struct i915_gem_context *ctx;
> +	int ret;
> +
> +	ret = i915_mutex_lock_interruptible(&dev_priv->drm);
> +	if (ret)
> +		return ret;
> +
> +	/* Switch away from any user context.  */
> +	ret = i915_gem_switch_to_kernel_context(dev_priv);
> +	if (ret)
> +		return ret;
> +
> +	/* The OA register config is setup through the context image. This image
> +	 * might be written to by the GPU on context switch (in particular on
> +	 * lite-restore). This means we can't safely update a context's image,
> +	 * if this context is scheduled/submitted to run on the GPU.
> +	 *
> +	 * We could emit the OA register config through the batch buffer but
> +	 * this might leave small interval of time where the OA unit is
> +	 * configured at an invalid sampling period.
> +	 *
> +	 * So far the best way to work around this issue seems to be draining
> +	 * the GPU from any submitted work.
> +	 */
> +	ret = i915_gem_wait_for_idle(dev_priv,
> +				     I915_WAIT_INTERRUPTIBLE |
> +				     I915_WAIT_LOCKED);
> +	if (ret) {
> +		mutex_unlock(&dev_priv->drm.struct_mutex);
> +		return ret;
> +	}
> +
> +	/* Update all contexts now that we've stalled the submission. */
> +	list_for_each_entry(ctx, &dev_priv->context_list, link) {
> +		if (!ctx->engine[RCS].initialised)
> +			continue;
> +
> +		gen8_update_reg_state_unlocked(ctx,
> +					       ctx->engine[RCS].lrc_reg_state);
> +	}
> +
> +	mutex_unlock(&dev_priv->drm.struct_mutex);
> +
> +	/* Now update the current context.
> +	 *
> +	 * Note: Using MMIO to update per-context registers requires
> +	 * some extra care...
> +	 */
> +	ret = gen8_begin_ctx_mmio(dev_priv);
> +	if (ret) {
> +		DRM_ERROR("Failed to bring RCS out of idle to update current ctx OA state\n");
> +		return ret;
> +	}
> +
> +	I915_WRITE(GEN8_OACTXCONTROL, ((dev_priv->perf.oa.period_exponent <<
> +					GEN8_OA_TIMER_PERIOD_SHIFT) |
> +				      (dev_priv->perf.oa.periodic ?
> +				       GEN8_OA_TIMER_ENABLE : 0) |
> +				      GEN8_OA_COUNTER_RESUME));
> +
> +	config_oa_regs(dev_priv, dev_priv->perf.oa.flex_regs,
> +			dev_priv->perf.oa.flex_regs_len);
> +
> +	gen8_end_ctx_mmio(dev_priv);
> +
> +	return 0;
> +}
> +
> +static int gen8_enable_metric_set(struct drm_i915_private *dev_priv)
> +{
> +	int ret = dev_priv->perf.oa.ops.select_metric_set(dev_priv);
> +
> +	if (ret)
> +		return ret;
> +
> +	/* We disable slice/unslice clock ratio change reports on SKL since
> +	 * they are too noisy. The HW generates a lot of redundant reports
> +	 * where the ratio hasn't really changed causing a lot of redundant
> +	 * work to processes and increasing the chances we'll hit buffer
> +	 * overruns.
> +	 *
> +	 * Although we don't currently use the 'disable overrun' OABUFFER
> +	 * feature it's worth noting that clock ratio reports have to be
> +	 * disabled before considering to use that feature since the HW doesn't
> +	 * correctly block these reports.
> +	 *
> +	 * Currently none of the high-level metrics we have depend on knowing
> +	 * this ratio to normalize.
> +	 *
> +	 * Note: This register is not power context saved and restored, but
> +	 * that's OK considering that we disable RC6 while the OA unit is
> +	 * enabled.
> +	 *
> +	 * The _INCLUDE_CLK_RATIO bit allows the slice/unslice frequency to
> +	 * be read back from automatically triggered reports, as part of the
> +	 * RPT_ID field.
> +	 */
> +	if (IS_SKYLAKE(dev_priv) || IS_BROXTON(dev_priv)) {
> +		I915_WRITE(GEN8_OA_DEBUG,
> +			   _MASKED_BIT_ENABLE(GEN9_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS |
> +					      GEN9_OA_DEBUG_INCLUDE_CLK_RATIO));
> +	}
> +
> +	I915_WRITE(GDT_CHICKEN_BITS, 0xA0);
> +	config_oa_regs(dev_priv, dev_priv->perf.oa.mux_regs,
> +		       dev_priv->perf.oa.mux_regs_len);
> +	I915_WRITE(GDT_CHICKEN_BITS, 0x80);
> +
> +	/* It takes a fairly long time for a new MUX configuration to
> +	 * be be applied after these register writes. This delay
> +	 * duration is take from Haswell (derived empirically based on
> +	 * the render_basic config) but hopefully it covers the
> +	 * maximum configuration latency for Gen8+ too...
> +	 */
> +	usleep_range(15000, 20000);
> +
> +	config_oa_regs(dev_priv, dev_priv->perf.oa.b_counter_regs,
> +		       dev_priv->perf.oa.b_counter_regs_len);
> +
> +	ret = gen8_configure_all_contexts(dev_priv);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static void gen8_disable_metric_set(struct drm_i915_private *dev_priv)
> +{
> +	/* NOP */
> +}
> +
>   static void gen7_update_oacontrol_locked(struct drm_i915_private *dev_priv)
>   {
>   	lockdep_assert_held(&dev_priv->perf.hook_lock);
> @@ -1157,6 +1807,29 @@ static void gen7_oa_enable(struct drm_i915_private *dev_priv)
>   	spin_unlock_irqrestore(&dev_priv->perf.hook_lock, flags);
>   }
>
> +static void gen8_oa_enable(struct drm_i915_private *dev_priv)
> +{
> +	u32 report_format = dev_priv->perf.oa.oa_buffer.format;
> +
> +	/* Reset buf pointers so we don't forward reports from before now.
> +	 *
> +	 * Think carefully if considering trying to avoid this, since it
> +	 * also ensures status flags and the buffer itself are cleared
> +	 * in error paths, and we have checks for invalid reports based
> +	 * on the assumption that certain fields are written to zeroed
> +	 * memory which this helps maintains.
> +	 */
> +	gen8_init_oa_buffer(dev_priv);
> +
> +	/* Note: we don't rely on the hardware to perform single context
> +	 * filtering and instead filter on the cpu based on the context-id
> +	 * field of reports
> +	 */
> +	I915_WRITE(GEN8_OACONTROL, (report_format <<
> +				    GEN8_OA_REPORT_FORMAT_SHIFT) |
> +				   GEN8_OA_COUNTER_ENABLE);
> +}
> +
>   /**
>    * i915_oa_stream_enable - handle `I915_PERF_IOCTL_ENABLE` for OA stream
>    * @stream: An i915 perf stream opened for OA metrics
> @@ -1183,6 +1856,11 @@ static void gen7_oa_disable(struct drm_i915_private *dev_priv)
>   	I915_WRITE(GEN7_OACONTROL, 0);
>   }
>
> +static void gen8_oa_disable(struct drm_i915_private *dev_priv)
> +{
> +	I915_WRITE(GEN8_OACONTROL, 0);
> +}
> +
>   /**
>    * i915_oa_stream_disable - handle `I915_PERF_IOCTL_DISABLE` for OA stream
>    * @stream: An i915 perf stream opened for OA metrics
> @@ -1361,6 +2039,21 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
>   	return ret;
>   }
>
> +void i915_oa_init_reg_state(struct intel_engine_cs *engine,
> +			    struct i915_gem_context *ctx,
> +			    u32 *reg_state)
> +{
> +	struct drm_i915_private *dev_priv = engine->i915;
> +
> +	if (engine->id != RCS)
> +		return;
> +
> +	if (!dev_priv->perf.initialized)
> +		return;
> +
> +	gen8_update_reg_state_unlocked(ctx, reg_state);
> +}
> +
>   /**
>    * i915_perf_read_locked - &i915_perf_stream_ops->read with error normalisation
>    * @stream: An i915 perf stream
> @@ -1486,7 +2179,7 @@ static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer)
>   		container_of(hrtimer, typeof(*dev_priv),
>   			     perf.oa.poll_check_timer);
>
> -	if (dev_priv->perf.oa.ops.oa_buffer_check(dev_priv)) {
> +	if (oa_buffer_check_unlocked(dev_priv)) {
>   		dev_priv->perf.oa.pollin = true;
>   		wake_up(&dev_priv->perf.oa.poll_wq);
>   	}
> @@ -1775,6 +2468,7 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv,
>   	struct i915_gem_context *specific_ctx = NULL;
>   	struct i915_perf_stream *stream = NULL;
>   	unsigned long f_flags = 0;
> +	bool privileged_op = true;
>   	int stream_fd;
>   	int ret;
>
> @@ -1792,12 +2486,28 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv,
>   		}
>   	}
>
> +	/* On Haswell the OA unit supports clock gating off for a specific
> +	 * context and in this mode there's no visibility of metrics for the
> +	 * rest of the system, which we consider acceptable for a
> +	 * non-privileged client.
> +	 *
> +	 * For Gen8+ the OA unit no longer supports clock gating off for a
> +	 * specific context and the kernel can't securely stop the counters
> +	 * from updating as system-wide / global values. Even though we can
> +	 * filter reports based on the included context ID we can't block
> +	 * clients from seeing the raw / global counter values via
> +	 * MI_REPORT_PERF_COUNT commands and so consider it a privileged op to
> +	 * enable the OA unit by default.
> +	 */
> +	if (IS_HASWELL(dev_priv) && specific_ctx)
> +		privileged_op = false;
> +
>   	/* Similar to perf's kernel.perf_paranoid_cpu sysctl option
>   	 * we check a dev.i915.perf_stream_paranoid sysctl option
>   	 * to determine if it's ok to access system wide OA counters
>   	 * without CAP_SYS_ADMIN privileges.
>   	 */
> -	if (!specific_ctx &&
> +	if (privileged_op &&
>   	    i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) {
>   		DRM_DEBUG("Insufficient privileges to open system-wide i915 perf stream\n");
>   		ret = -EACCES;
> @@ -2069,9 +2779,6 @@ int i915_perf_open_ioctl(struct drm_device *dev, void *data,
>    */
>   void i915_perf_register(struct drm_i915_private *dev_priv)
>   {
> -	if (!IS_HASWELL(dev_priv))
> -		return;
> -
>   	if (!dev_priv->perf.initialized)
>   		return;
>
> @@ -2087,11 +2794,38 @@ void i915_perf_register(struct drm_i915_private *dev_priv)
>   	if (!dev_priv->perf.metrics_kobj)
>   		goto exit;
>
> -	if (i915_perf_register_sysfs_hsw(dev_priv)) {
> -		kobject_put(dev_priv->perf.metrics_kobj);
> -		dev_priv->perf.metrics_kobj = NULL;
> +	if (IS_HASWELL(dev_priv)) {
> +		if (i915_perf_register_sysfs_hsw(dev_priv))
> +			goto sysfs_error;
> +	} else if (IS_BROADWELL(dev_priv)) {
> +		if (i915_perf_register_sysfs_bdw(dev_priv))
> +			goto sysfs_error;
> +	} else if (IS_CHERRYVIEW(dev_priv)) {
> +		if (i915_perf_register_sysfs_chv(dev_priv))
> +			goto sysfs_error;
> +	} else if (IS_SKYLAKE(dev_priv)) {
> +		if (IS_SKL_GT2(dev_priv)) {
> +			if (i915_perf_register_sysfs_sklgt2(dev_priv))
> +				goto sysfs_error;
> +		} else if (IS_SKL_GT3(dev_priv)) {
> +			if (i915_perf_register_sysfs_sklgt3(dev_priv))
> +				goto sysfs_error;
> +		} else if (IS_SKL_GT4(dev_priv)) {
> +			if (i915_perf_register_sysfs_sklgt4(dev_priv))
> +				goto sysfs_error;
> +		} else
> +			goto sysfs_error;
> +	} else if (IS_BROXTON(dev_priv)) {
> +		if (i915_perf_register_sysfs_bxt(dev_priv))
> +			goto sysfs_error;
>   	}
>
> +	goto exit;
> +
> +sysfs_error:
> +	kobject_put(dev_priv->perf.metrics_kobj);
> +	dev_priv->perf.metrics_kobj = NULL;
> +
>   exit:
>   	mutex_unlock(&dev_priv->perf.lock);
>   }
> @@ -2107,13 +2841,24 @@ void i915_perf_register(struct drm_i915_private *dev_priv)
>    */
>   void i915_perf_unregister(struct drm_i915_private *dev_priv)
>   {
> -	if (!IS_HASWELL(dev_priv))
> -		return;
> -
>   	if (!dev_priv->perf.metrics_kobj)
>   		return;
>
> -	i915_perf_unregister_sysfs_hsw(dev_priv);
> +        if (IS_HASWELL(dev_priv))
> +                i915_perf_unregister_sysfs_hsw(dev_priv);
> +        else if (IS_BROADWELL(dev_priv))
> +                i915_perf_unregister_sysfs_bdw(dev_priv);
> +        else if (IS_CHERRYVIEW(dev_priv))
> +                i915_perf_unregister_sysfs_chv(dev_priv);
> +        else if (IS_SKYLAKE(dev_priv)) {
> +		if (IS_SKL_GT2(dev_priv))
> +			i915_perf_unregister_sysfs_sklgt2(dev_priv);
> +		else if (IS_SKL_GT3(dev_priv))
> +			i915_perf_unregister_sysfs_sklgt3(dev_priv);
> +		else if (IS_SKL_GT4(dev_priv))
> +			i915_perf_unregister_sysfs_sklgt4(dev_priv);
> +	} else if (IS_BROXTON(dev_priv))
> +                i915_perf_unregister_sysfs_bxt(dev_priv);
>
>   	kobject_put(dev_priv->perf.metrics_kobj);
>   	dev_priv->perf.metrics_kobj = NULL;
> @@ -2172,36 +2917,105 @@ static struct ctl_table dev_root[] = {
>    */
>   void i915_perf_init(struct drm_i915_private *dev_priv)
>   {
> -	if (!IS_HASWELL(dev_priv))
> -		return;
> -
> -	hrtimer_init(&dev_priv->perf.oa.poll_check_timer,
> -		     CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> -	dev_priv->perf.oa.poll_check_timer.function = oa_poll_check_timer_cb;
> -	init_waitqueue_head(&dev_priv->perf.oa.poll_wq);
> +	dev_priv->perf.oa.n_builtin_sets = 0;
> +
> +	if (IS_HASWELL(dev_priv)) {
> +		dev_priv->perf.oa.ops.init_oa_buffer = gen7_init_oa_buffer;
> +		dev_priv->perf.oa.ops.enable_metric_set = hsw_enable_metric_set;
> +		dev_priv->perf.oa.ops.disable_metric_set = hsw_disable_metric_set;
> +		dev_priv->perf.oa.ops.oa_enable = gen7_oa_enable;
> +		dev_priv->perf.oa.ops.oa_disable = gen7_oa_disable;
> +		dev_priv->perf.oa.ops.read = gen7_oa_read;
> +		dev_priv->perf.oa.ops.oa_hw_tail_read =
> +			gen7_oa_hw_tail_read;
> +
> +		dev_priv->perf.oa.oa_formats = hsw_oa_formats;
> +
> +		dev_priv->perf.oa.n_builtin_sets =
> +			i915_oa_n_builtin_metric_sets_hsw;
> +	} else if (i915.enable_execlists) {
> +		/* Note: that although we could theoretically also support the
> +		 * legacy ringbuffer mode on BDW (and earlier iterations of
> +		 * this driver, before upstreaming did this) it didn't seem
> +		 * worth the complexity to maintain now that BDW+ enable
> +		 * execlist mode by default.
> +		 */
>
> -	INIT_LIST_HEAD(&dev_priv->perf.streams);
> -	mutex_init(&dev_priv->perf.lock);
> -	spin_lock_init(&dev_priv->perf.hook_lock);
> -	spin_lock_init(&dev_priv->perf.oa.oa_buffer.ptr_lock);
> +		if (IS_GEN8(dev_priv)) {
> +			dev_priv->perf.oa.ctx_oactxctrl_offset = 0x120;
> +			dev_priv->perf.oa.ctx_flexeu0_offset = 0x2ce;
> +			dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<25);
> +
> +			if (IS_BROADWELL(dev_priv)) {
> +				dev_priv->perf.oa.n_builtin_sets =
> +					i915_oa_n_builtin_metric_sets_bdw;
> +				dev_priv->perf.oa.ops.select_metric_set =
> +					i915_oa_select_metric_set_bdw;
> +			} else if (IS_CHERRYVIEW(dev_priv)) {
> +				dev_priv->perf.oa.n_builtin_sets =
> +					i915_oa_n_builtin_metric_sets_chv;
> +				dev_priv->perf.oa.ops.select_metric_set =
> +					i915_oa_select_metric_set_chv;
> +			}
> +		} else if (IS_GEN9(dev_priv)) {
> +			dev_priv->perf.oa.ctx_oactxctrl_offset = 0x128;
> +			dev_priv->perf.oa.ctx_flexeu0_offset = 0x3de;
> +			dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16);
> +
> +			if (IS_SKL_GT2(dev_priv)) {
> +				dev_priv->perf.oa.n_builtin_sets =
> +					i915_oa_n_builtin_metric_sets_sklgt2;
> +				dev_priv->perf.oa.ops.select_metric_set =
> +					i915_oa_select_metric_set_sklgt2;
> +			} else if (IS_SKL_GT3(dev_priv)) {
> +				dev_priv->perf.oa.n_builtin_sets =
> +					i915_oa_n_builtin_metric_sets_sklgt3;
> +				dev_priv->perf.oa.ops.select_metric_set =
> +					i915_oa_select_metric_set_sklgt3;
> +			} else if (IS_SKL_GT4(dev_priv)) {
> +				dev_priv->perf.oa.n_builtin_sets =
> +					i915_oa_n_builtin_metric_sets_sklgt4;
> +				dev_priv->perf.oa.ops.select_metric_set =
> +					i915_oa_select_metric_set_sklgt4;
> +			} else if (IS_BROXTON(dev_priv)) {
> +				dev_priv->perf.oa.n_builtin_sets =
> +					i915_oa_n_builtin_metric_sets_bxt;
> +				dev_priv->perf.oa.ops.select_metric_set =
> +					i915_oa_select_metric_set_bxt;
> +			}
> +		}
>
> -	dev_priv->perf.oa.ops.init_oa_buffer = gen7_init_oa_buffer;
> -	dev_priv->perf.oa.ops.enable_metric_set = hsw_enable_metric_set;
> -	dev_priv->perf.oa.ops.disable_metric_set = hsw_disable_metric_set;
> -	dev_priv->perf.oa.ops.oa_enable = gen7_oa_enable;
> -	dev_priv->perf.oa.ops.oa_disable = gen7_oa_disable;
> -	dev_priv->perf.oa.ops.read = gen7_oa_read;
> -	dev_priv->perf.oa.ops.oa_buffer_check =
> -		gen7_oa_buffer_check_unlocked;
> +		if (dev_priv->perf.oa.n_builtin_sets) {
> +			dev_priv->perf.oa.ops.init_oa_buffer = gen8_init_oa_buffer;
> +			dev_priv->perf.oa.ops.enable_metric_set =
> +				gen8_enable_metric_set;
> +			dev_priv->perf.oa.ops.disable_metric_set =
> +				gen8_disable_metric_set;
> +			dev_priv->perf.oa.ops.oa_enable = gen8_oa_enable;
> +			dev_priv->perf.oa.ops.oa_disable = gen8_oa_disable;
> +			dev_priv->perf.oa.ops.read = gen8_oa_read;
> +			dev_priv->perf.oa.ops.oa_hw_tail_read =
> +				gen8_oa_hw_tail_read;
> +
> +			dev_priv->perf.oa.oa_formats = gen8_plus_oa_formats;
> +		}
> +	}
>
> -	dev_priv->perf.oa.oa_formats = hsw_oa_formats;
> +	if (dev_priv->perf.oa.n_builtin_sets) {
> +		hrtimer_init(&dev_priv->perf.oa.poll_check_timer,
> +				CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> +		dev_priv->perf.oa.poll_check_timer.function = oa_poll_check_timer_cb;
> +		init_waitqueue_head(&dev_priv->perf.oa.poll_wq);
>
> -	dev_priv->perf.oa.n_builtin_sets =
> -		i915_oa_n_builtin_metric_sets_hsw;
> +		INIT_LIST_HEAD(&dev_priv->perf.streams);
> +		mutex_init(&dev_priv->perf.lock);
> +		spin_lock_init(&dev_priv->perf.hook_lock);
> +		spin_lock_init(&dev_priv->perf.oa.oa_buffer.ptr_lock);
>
> -	dev_priv->perf.sysctl_header = register_sysctl_table(dev_root);
> +		dev_priv->perf.sysctl_header = register_sysctl_table(dev_root);
>
> -	dev_priv->perf.initialized = true;
> +		dev_priv->perf.initialized = true;
> +	}
>   }
>
>   /**
> @@ -2216,5 +3030,6 @@ void i915_perf_fini(struct drm_i915_private *dev_priv)
>   	unregister_sysctl_table(dev_priv->perf.sysctl_header);
>
>   	memset(&dev_priv->perf.oa.ops, 0, sizeof(dev_priv->perf.oa.ops));
> +
>   	dev_priv->perf.initialized = false;
>   }
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 4c72adae368b..c0bbba6d5b78 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -653,6 +653,12 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
>
>   #define GEN8_OACTXID _MMIO(0x2364)
>
> +#define GEN8_OA_DEBUG _MMIO(0x2B04)
> +#define  GEN9_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS    (1<<5)
> +#define  GEN9_OA_DEBUG_INCLUDE_CLK_RATIO	    (1<<6)
> +#define  GEN9_OA_DEBUG_DISABLE_GO_1_0_REPORTS	    (1<<2)
> +#define  GEN9_OA_DEBUG_DISABLE_CTX_SWITCH_REPORTS   (1<<1)
> +
>   #define GEN8_OACONTROL _MMIO(0x2B00)
>   #define  GEN8_OA_REPORT_FORMAT_A12	    (0<<2)
>   #define  GEN8_OA_REPORT_FORMAT_A12_B8_C8    (2<<2)
> @@ -674,6 +680,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
>   #define  GEN7_OABUFFER_STOP_RESUME_ENABLE   (1<<1)
>   #define  GEN7_OABUFFER_RESUME		    (1<<0)
>
> +#define GEN8_OABUFFER_UDW _MMIO(0x23b4)
>   #define GEN8_OABUFFER _MMIO(0x2b14)
>
>   #define GEN7_OASTATUS1 _MMIO(0x2364)
> @@ -692,7 +699,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
>   #define  GEN8_OASTATUS_REPORT_LOST	    (1<<0)
>
>   #define GEN8_OAHEADPTR _MMIO(0x2B0C)
> +#define GEN8_OAHEADPTR_MASK    0xffffffc0
>   #define GEN8_OATAILPTR _MMIO(0x2B10)
> +#define GEN8_OATAILPTR_MASK    0xffffffc0
>
>   #define OABUFFER_SIZE_128K  (0<<3)
>   #define OABUFFER_SIZE_256K  (1<<3)
> @@ -705,7 +714,17 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
>
>   #define OA_MEM_SELECT_GGTT  (1<<0)
>
> +/*
> + * Flexible, Aggregate EU Counter Registers.
> + * Note: these aren't contiguous
> + */
>   #define EU_PERF_CNTL0	    _MMIO(0xe458)
> +#define EU_PERF_CNTL1	    _MMIO(0xe558)
> +#define EU_PERF_CNTL2	    _MMIO(0xe658)
> +#define EU_PERF_CNTL3	    _MMIO(0xe758)
> +#define EU_PERF_CNTL4	    _MMIO(0xe45c)
> +#define EU_PERF_CNTL5	    _MMIO(0xe55c)
> +#define EU_PERF_CNTL6	    _MMIO(0xe65c)
>
>   #define GDT_CHICKEN_BITS    _MMIO(0x9840)
>   #define GT_NOA_ENABLE	    0x00000080
> @@ -2325,6 +2344,9 @@ enum skl_disp_power_wells {
>   #define   GEN8_RC_SEMA_IDLE_MSG_DISABLE	(1 << 12)
>   #define   GEN8_FF_DOP_CLOCK_GATE_DISABLE	(1<<10)
>
> +#define GEN6_RCS_PWR_FSM _MMIO(0x22ac)
> +#define GEN9_RCS_FE_FSM2 _MMIO(0x22a4)
> +
>   /* Fuse readout registers for GT */
>   #define CHV_FUSE_GT			_MMIO(VLV_DISPLAY_BASE + 0x2168)
>   #define   CHV_FGT_DISABLE_SS0		(1 << 10)
> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
> index 7df278fe492e..351e231a02f4 100644
> --- a/drivers/gpu/drm/i915/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/intel_lrc.c
> @@ -1879,6 +1879,8 @@ static void execlists_init_reg_state(u32 *regs,
>   		regs[CTX_LRI_HEADER_2] = MI_LOAD_REGISTER_IMM(1);
>   		CTX_REG(regs, CTX_R_PWR_CLK_STATE, GEN8_R_PWR_CLK_STATE,
>   			make_rpcs(dev_priv));
> +
> +		i915_oa_init_reg_state(engine, ctx, regs);
>   	}
>   }
>
> diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
> index 464547d08173..15bc9f78ba4d 100644
> --- a/include/uapi/drm/i915_drm.h
> +++ b/include/uapi/drm/i915_drm.h
> @@ -1316,13 +1316,18 @@ struct drm_i915_gem_context_param {
>   };
>
>   enum drm_i915_oa_format {
> -	I915_OA_FORMAT_A13 = 1,
> -	I915_OA_FORMAT_A29,
> -	I915_OA_FORMAT_A13_B8_C8,
> -	I915_OA_FORMAT_B4_C8,
> -	I915_OA_FORMAT_A45_B8_C8,
> -	I915_OA_FORMAT_B4_C8_A16,
> -	I915_OA_FORMAT_C4_B8,
> +	I915_OA_FORMAT_A13 = 1,	    /* HSW only */
> +	I915_OA_FORMAT_A29,	    /* HSW only */
> +	I915_OA_FORMAT_A13_B8_C8,   /* HSW only */
> +	I915_OA_FORMAT_B4_C8,	    /* HSW only */
> +	I915_OA_FORMAT_A45_B8_C8,   /* HSW only */
> +	I915_OA_FORMAT_B4_C8_A16,   /* HSW only */
> +	I915_OA_FORMAT_C4_B8,	    /* HSW+ */
> +
> +	/* Gen8+ */
> +	I915_OA_FORMAT_A12,
> +	I915_OA_FORMAT_A12_B8_C8,
> +	I915_OA_FORMAT_A32u40_A4u32_B8_C8,
>
>   	I915_OA_FORMAT_MAX	    /* non-ABI */
>   };
> --
> 2.11.0
>



More information about the Intel-gfx mailing list