[Intel-gfx] [PATCH 4/7] lib/igt_draw: Add Y-tiling support for IGT_DRAW_BLT method

[Paulo Zanoni]

Em Sáb, 2017-03-18 às 00:45 +0530, Praveen Paneri escreveu:
> From: Akash Goel <akash.goel at intel.com>
> 
> Signed-off-by: Akash Goel <akash.goel at intel.com>
> Signed-off-by: Praveen Paneri <praveen.paneri at intel.com>
> ---
>  lib/igt_draw.c | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/lib/igt_draw.c b/lib/igt_draw.c
> index fcf8fba..17011d8 100644
> --- a/lib/igt_draw.c
> +++ b/lib/igt_draw.c
> @@ -31,6 +31,7 @@
>  #include "igt_core.h"
>  #include "igt_fb.h"
>  #include "ioctl_wrappers.h"
> +#include "i830_reg.h"
>  
>  /**
>   * SECTION:igt_draw
> @@ -487,6 +488,23 @@ static void draw_rect_blt(int fd, struct
> cmd_data *cmd_data,
>  	blt_cmd_tiling = (tiling) ? XY_COLOR_BLT_TILED : 0;
>  	pitch = (tiling) ? buf->stride / 4 : buf->stride;
>  
> +	if (tiling == I915_TILING_Y) {
> +		/* To change the tile register, insert an
> MI_FLUSH_DW followed by an MI_LOAD_REGISTER_IMM */
> +		BEGIN_BATCH(4, 0);
> +		OUT_BATCH(MI_FLUSH_DW | 2);
> +		OUT_BATCH(0x0);
> +		OUT_BATCH(0x0);
> +		OUT_BATCH(0x0);
> +		ADVANCE_BATCH();
> +
> +		BEGIN_BATCH(4, 0);
> +		OUT_BATCH(MI_LOAD_REGISTER_IMM);
> +		OUT_BATCH(0x22200); /* BCS_SWCTRL */
> +		OUT_BATCH(((0x3 << 16) | 0x3)); /* enable the Y
> tiling */
> +		OUT_BATCH(MI_NOOP);
> +		ADVANCE_BATCH();
> +	}
> +
>  	BEGIN_BATCH(6, 1);
>  	OUT_BATCH(XY_COLOR_BLT_CMD_NOLEN | XY_COLOR_BLT_WRITE_ALPHA
> |
>  		  XY_COLOR_BLT_WRITE_RGB | blt_cmd_tiling |
> blt_cmd_len);
> @@ -497,6 +515,23 @@ static void draw_rect_blt(int fd, struct
> cmd_data *cmd_data,
>  	OUT_BATCH(color);
>  	ADVANCE_BATCH();
>  
> +	if (tiling == I915_TILING_Y) {
> +		/* To change the tile register, insert an
> MI_FLUSH_DW followed by an MI_LOAD_REGISTER_IMM */
> +		BEGIN_BATCH(4, 0);
> +		OUT_BATCH(MI_FLUSH_DW | 2);
> +		OUT_BATCH(0x0);
> +		OUT_BATCH(0x0);
> +		OUT_BATCH(0x0);
> +		ADVANCE_BATCH();
> +
> +		BEGIN_BATCH(4, 0);
> +		OUT_BATCH(MI_LOAD_REGISTER_IMM);
> +		OUT_BATCH(0x22200); /* BCS_SWCTRL */
> +		OUT_BATCH((0x3 << 16)); /* Reset back to X-Tiling
> (default) */
> +		OUT_BATCH(MI_NOOP);
> +		ADVANCE_BATCH();
> +	}

These are two almost identical copies of the same code. Please extract
them to a function that takes the tiling as the argument.

> +
>  	intel_batchbuffer_flush(batch);
>  	intel_batchbuffer_free(batch);
>  }