[Intel-gfx] [PATCH i-g-t] tests/kms: increase max threshold time for edid read

[clinton.a.taylor at intel.com]

From: Clint Taylor <clinton.a.taylor at intel.com>

Current 50ms max threshold timing for an EDID read is very close to the
actual time for a 2 block HDMI EDID read of 48ms. Any delay like a clock
stretch by the EDID eeprom will cause this test to fail. A 4 block HDMI
EDID read takes approximately 88ms under nominal conditions, making the max
threshold 95ms will allow this test to pass regardless of monitor attached.

Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
---
 tests/kms_sysfs_edid_timing.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tests/kms_sysfs_edid_timing.c b/tests/kms_sysfs_edid_timing.c
index 1201388..b45e080 100644
--- a/tests/kms_sysfs_edid_timing.c
+++ b/tests/kms_sysfs_edid_timing.c
@@ -27,14 +27,14 @@
 #include <sys/stat.h>
 
 #define THRESHOLD_PER_CONNECTOR	10
-#define THRESHOLD_TOTAL		50
+#define THRESHOLD_TOTAL		95
 #define CHECK_TIMES		15
 
 IGT_TEST_DESCRIPTION("This check the time we take to read the content of all "
 		     "the possible connectors. Without the edid -ENXIO patch "
 		     "(http://permalink.gmane.org/gmane.comp.video.dri.devel/62083), "
-		     "we sometimes take a *really* long time. "
-		     "So let's just check for some reasonable timing here");
+		     "we sometimes take a *really* long time. So let's just "
+		     "check an approximate HDMI 4 block edid read timing here");
 
 
 igt_simple_main
-- 
1.9.1