[Intel-gfx] [PATCH v2] drm/i915: Ignore TMDS clock limit for DP++ when EDID override is set

[Abdiel Janulgue]

4K modes testing by using dummy EDID data has never been working
properly on boxes with DP++ (dual-mode) adaptors. The reason for
this is that those modes got pruned during hdmi mode validation.
intel_hdmi_mode_valid returns CLOCK_HIGH because the pixel clock
reported by the 4k mode is higher than dual port TMDS clock limit.

However 4k injection does work properly on machines that don't have
DP++ adapters because the mode is never validated against the DP++
TMDS clock limit.

v2: Don't detect the DP++ limits when we're testing using overridden
    EDIDs. Make sure to check for the override condition after
    respecting the value of drm_dp_dual_mode_detect (Jani Nikula).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101649
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index bced7b9..9834690 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1567,7 +1567,10 @@ intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
 	 * there's nothing connected to the port.
 	 */
 	if (type == DRM_DP_DUAL_MODE_UNKNOWN) {
-		if (has_edid &&
+		/* An overridden EDID imply that we want this port for testing.
+		 * Make sure not to set limits for that port.
+		 */
+		if (has_edid && !connector->override_edid &&
 		    intel_bios_is_port_dp_dual_mode(dev_priv, port)) {
 			DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n");
 			type = DRM_DP_DUAL_MODE_TYPE1_DVI;
-- 
2.7.4